How to open project in netbeans IDE

am developing one new application in mobile using netbeans 4.1 ide.and j2me..how to open the project folder (which i downloaded
from mail attachment) in my netbeans ide..
pls tel me in detail ...
mohu

Nothing?

Similar Messages

How to open project from an earlier version (RH x3) using RoboHelp 6.

Hello everyone, I need your help. I have recently upgraded
from RH x3 to RH V6. I have just completed the installation of RH6
after spending long time with Adobe customer support as it took
them long time to figure out how to provide me the unlocking key to
install RH v6.
BTW I have only installed RoboHelp 6 by itself. I did not
install their Source Control because we already have Visual Source
Safe which we have been using in our company.
Also, since I had Adobe Reader 8 installed on my PC, I did
not install Acrobat Element 7 either. As I suppose if Acrobat 7 or
higher is installed RH v6 was not going to install Acrobat Element
7.
Well, now after I have installed RH v6, my first step is to
find out how to open project from an earlier version (RH x3) using
RoboHelp 6.
RH x3 is installed on my old PC and I am working on my new PC
where I have installed RH V6.
Sorry, for providing you too many details, the purpose is
only to give you a clear picture.
Please, give me your feedback if I am doing everything
correct and how should I open the project from an earlier version.
Thanks

Hi Peter,
Thank you so much for the response. Actually, after I posted
the question on Forum we had lost internet connection for some time
and I just went ahead and tried it by myself.
This is what I did – since we use MS Visual Source
Safe, my all files were in the working folder of VSS in my c drive.
I just clicked the Open tab/More Files in RoboHelp Starter and
located the RoboHelp HTML Project File. It opened without any
problem. Everything looks alright.
Is there anything specific I should be checking to make sure
if it is working fine in this version of RH. Because I did not
create this project, somebody else did and I have never used this
tool before this is the first time I will be using.
I found your site pretty helpful though and it did have some
information about Source Safe. I still have one question related to
Visual Source Safe that Is RoboHelp v6 linked to VSS automatically
and check the files out from it automatically whenever a project is
opened or we have to manually set the link between the RH6 &
VSS.
In RH x3 whenever I would open a project it would prompt a
message that in order to open this project the following files need
to be writable, would you like to make them writable, selecting
that option would checkout all the files from the VSS to make them
writable. However, in RH V6 I opened an existing project and it
opened without checking out the project files from VSS. Do you have
any idea what’s happening?
Ps: Do you recommend any book on RH 6 for starters or any
other recommendation?
Your help is always appreciated

Problem with opening project in NetBeans 5.0

Hi,
When i try to open an existing project in NetBeans 5.0 or try to add a new platform to a certain project, my computer is stack and i can't work with the NetBeans IDE ( i have to kill the process)
How can i fix this problem?

Hi
Please ensure servlet can natural work.
http://localhost:8080/one/Receive
Please use actual path in form at best.
/appname/uservletname
just say:
<form method="post" action="/one/Receive">
Regards

How to Open project

I am trying to open a project.I have downloaded netbeans IDE. when i say open project, there is no solution file available where i can open all files.although i can open separate file as individuals but thts not the part of the project.Can somebody help me?

Java.123 wrote:
Are you a developer? Java developer? No and no.
I dont ask questions on forums. It doesn't matter where you ask your question. If it's online, on a forum or mailing list, or if you're asking the person sitting next to you. You need to explain yourself properly.
Am new to java and tried forum so that somebody could give me a head start.With what? How Netbeans works? That "question" has already been answered.
Didnt here people love to comment on somebody's capabilities rather than addressing the issue.ANyways thanks for your comments and guud luck.Buh-bye.

Help: how to open form in NetBeans ?

Hi, I'm newbie in Java. I used NetBeans IDE for my project.
I have 2 forms. In the first form, I have menu called "Setup". I need to open the second form when I click the "Setup" menu. I already enter to the action dialog, but I don't know how to complete it. Please help me.

Java is not VB. Please go through [The Java™ Tutorials|http://java.sun.com/docs/books/tutorial/index.html].
db

How to open Project File?

Sorry for this I am a newbie, I love the "Fun With" series but I don't know how to open the project files. It comes to my desktop with stuffit expander and then in text edit it looks like a mess. Please advise and thanks!

Ah - Good point, Kyriakos!
Tornlov, many of the Fun With use the Replicator, which is not available in Motion 1.0, however, many do not use the replicator. To try a project in Motion 1, first uncompress the zip file by double clicking on it, you should find a .motn file. Open it in Text Edit and change the version from 2.0 to 1.0 and save.
post back,
Patrick

How to open projects within a zip file?

Is there any way to use the open project feature to open projects within a zip file loaded onto a LMS? I have several files loaded in a zip file and I would like to navigate to each one within the zip file itself. The problem that I see is that it does not know where to look. Within the zip file, there is a main menu file that is used to branch out to another project file and then the user will go back to the main file to navigate to another. I know this seems complicated, but I am being asked to see if this is possible.

A zipped SCORM package is always unzipped on the LMS server after upload. So you need to look at the file and folder structure of the SCORM after it was unzipped to see how to navigate or link to other elements.
However, let me just say that what you are trying to do will almost certainly cause you many headaches. A multi-SCO SCORM package is meant to be comprised of several individual SCO modules that do not usually talk to each other because by definition in the SCORM standard they are supposed to be standalone and not require anything else to play.
Additionally, a multi-SCO package uploaded to an LMS is intended to allow the LMS to control navigation to individual SCO modules via the TOC links that the LMS creates in its own SCORM player. Once you start over riding these links and opening up individual SCOs without using the TOC links you run the risk of confusing the LMS as to which SCO is actually playing. The SCORM API only wants to deal with one SCO at a time.

How to Open Project Professional file of particular project from project server pro-grammatically?

Hello all,
I am working on project server 2013 right now.
I am able to create and check in project from my C# application. but is there any way open MPP file of this project from my App.
Regards, Kartik Ghodasara Associative Software engineer, Synoverge Tech Pvt. Ltd. Ahmedabad Please vote or mark as answer if it helps...

Hello Folks,
i have found some code to do the stuff i want to. but it ain't working right now as i don't know what to pass in Filename
argument in the FileOpen() method.
Reference : http://us.generation-nt.com/answer/how-open-winproj-exe-2007-programmatically-c-applicatio-help-96037972.html
private void start()
var objProcess = Process.Start(@"winproj.exe", "/s http://servername/pwainstance/");
internal void OpenProjectPlanThroughXMl()
var backgroundThread = new System.Threading.Thread(new ThreadStart(start));
backgroundThread.Start();
System.Threading.Thread.Sleep(10000);
Microsoft.Office.Interop.MSProject.ApplicationClass objProject = new ApplicationClass();
objProject.Visible = false;
object oMissing = System.Reflection.Missing.Value;
object oFile = @"<>\myprojectname.published";
object oUserName = "username";//"MSProjectUser"; // Project server database user
object oPassword = "password@123";//"tcs@12345"; // project server database password
object oURL = "http://servername/pwainstance";
object oFormat = "MSProject.mpp";
objProject.DisplayAlerts = false;
objProject.FileOpen(oFile, oMissing, PjMergeType.pjDoNotMerge, oMissing, oMissing, oMissing, oMissing, oUserName, oPassword, oFormat, oMissing, PjPoolOpen.pjPoolReadWrite, oMissing, oMissing, oMissing, oMissing);
objProject.ActiveProject.Application.BaselineSave(true, PjSaveBaselineFrom.pjCopyCurrent, PjSaveBaselineTo.pjIntoBaseline, true, true, true);
objProject.ActiveProject.Application.PublishAllInformation();
right now i am getting error like "Argument not valid".Please help me out.
Regards, Kartik Ghodasara Associative Software engineer, Synoverge Tech Pvt. Ltd. Ahmedabad Please vote or mark as answer if it helps...

How to develop complib using NetBeans IDE?

Anyone has done this? I don't know which project type I should use.
Thanks.

Hi,
Please post the query at the netbeans site.
Thanks
Cheers
Giri

"unable to open project" Any ideas how I might get it back?

I am not able to open a project i was working on this morning.
I have no idea why. They only thing I can think of is that after I finished
the project, I saved it to one folder in the drive.
Later, however, I changed my mind and decided to move the project to
a different folder. I got a message something about having to log in as administrator in order to be able to transfer the project from one folder to another, which I thought was weird.
So, now, when I tried to open the project from within FCP,
I get "unable to open project."
And I can't find the project anywhere in my computer.
Does anyone have any idea why this is happening?
More importantly, can i bring back my project?
I checked the "Autovault folder, but it wasn't there either.
thanks all!

Look in the Scratch Disk Settings. Look to see where you're autosaves are kept, and see if there's one there... if you change the location of this folder, you end up with one for each location. So do look where they are currently set to save.
If you have none at all, why not? Did you turn off the autosave feature?
Jerry

How to open your Photoshop Touch project file in Photoshop

How to open your Photoshop Touch project file in Photoshop
When your files are stored in the Creative Cloud, you can access them on your mobile device using Adobe Photoshop Touch, or on your desktop computer using Adobe Photoshop. Photoshop Touch can open files in the following formats: PSD*, PSDX, PNG, JPG, and GIF. And, with a free plug-in for Photoshop CS5, CS5.1, and CS6 you can open the PSDX files created by Photoshop Touch in Photoshop.
[Note: PSD files can only be opened via the Adobe Creative Cloud. The file is converted, layers are flattened to a single layer, and other info that is only supported in Photoshop is removed.]
Download the plug-in (if you have CS6, skip this section)
1. If you have CS5 and CS5.1, you are required to download a plug-in to be able to open your PSDX files in Photoshop. If you have CS6, you are not required to download the plug-in (it is native within the version). In a browser on your desktop computer, navigate to the Creative Cloud Homepage ( https://creative.adobe.com ). Sign-in to Creative Cloud using your Adobe ID, then navigate to the Creative Cloud Apps & Services page (https://creative.adobe.com/apps).
2. Click download under “Touch App Plug-ins” to start the download and install process. Included with the installer is a plug-in for Illustrator CS6, which enables opening of Ideas files (.idea) in Illustrator, and a plug-in for Photoshop CS5 and 5.1, which enables opening of Photoshop Touch files (.psdx) in Photoshop.
3. You will be asked (if you haven't already) to install the Adobe Application Manager. Follow the steps to install the manager, and the Touch App Plugin should begin the download and installation process. If it does not, click install next to the “Touch App Plugins” icon in the Adobe Application Manager to start the process.
4. You're all set to start opening your PS Touch files in Photoshop CS6.
To save a Photoshop Touch file for upload to the cloud.
1. Launch Photoshop Touch and ensure that you are in the organizer view. (Tap Done in the upper-left corner of the screen to move from edit view to the organizer view.)
2. Tap to display the share menu.
3. Select the file(s) to upload
4. Select the file format to upload to the cloud. Then tap OK.
5. Once you save the file format, you have a choice to e-mail the file as a attachment, or save a copy. By pressing cancel, it still can be uploaded to the cloud.
Uploading PS Touch files to the cloud.
1. Tap the settings button in the top right corner. Then tap My Account.
2. Tap Sign in. Sign in with your Adobe ID. To obtain an Adobe ID, go to : https://www.adobe.com/account/sign-in.adobedotcom.html. Once you are signed in, the total storage available in your Creative Cloud is displayed.
Sync your Photoshop Touch files to the Creative Cloud.
1. Tap the Creative Cloud icon. Make sure the Sync files toggle is switched to the on position.
2. When Creative Cloud sync is turned on, you can see your files being synced to your Creative Cloud account.
Open a Photoshop Touch file in Photoshop
1. On your desktop computer, launch a browser and navigate to the Creative Cloud website. When you are signed in, navigate to your Photoshop Touch file. Click to select the file.
2. Tap the download button in the top right corner.
3. When the download dialog button pops up, select PSD. Once the file has been downloaded, you can open in Photoshop (CS5, CS5.1, CS6) on your desktop.
4. When the file is opened in Photoshop, it displays its layers (Note: that if the file is dragged and dropped, and NOT downloaded, it will not display the layers).

Lightroom 5.3 should be able to open D600 RAW photos.
The problem is most likely that you used some version of Nikon software to transfer the photos to your computer. This interferes with Lightroom's ability to read the files. If the files are still on your camera card, use Lightroom to directly access them from the camera card. If they are not on your camera card, you can still fix the files, see http://forums.adobe.com/message/6181267#6181267

How to include others jar in my project use netbean

Hi,
Here i'm build my project in netbean, in compile source i add jdom.jar. Afer compile, run jar from terminal. But, application can't use and error :
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/jpos/
iso/ISOPackager
Now, i ask : How to include others lib or jar in my project use netbean
Rgds,
Wira S

Dear All,
The code In manifest.mf, like :
Manifest-Version: 1.0
X-COMMENT: Main-Class will be added automatically by build
Main-Class: root/Phase3/TesterPhase3/IsolibTester/src/isolibtester/DynamicTreeTester
Class-Path: root/Phase3/TesterPhase3/jpos/lib/jdom.jar
When build jar, error :
error while reading original manifest: error in opening zip file
Building jar: /root/PHASE3/TesterPhase3/IsolibTester/dist/IsolibTester.jar
Manifest is invalid: Manifest sections should start with a "Name" attribute and not "Main-Class"
/root/PHASE3/TesterPhase3/IsolibTester/nbproject/build-impl.xml:273: Invalid Manifest: /root/PHASE3/TesterPhase3/IsolibTester/manifest.mf
BUILD FAILED (total time: 0 seconds)
So, i tried add classpath in bash_profile and build.xml, unseccessful
But, when runing my project from terminal can't found component jdom.jar

How to connect netbeans ide with ms access?

hi,
i am using netbeans ide (latest one) . I use new project option to create a new project.Then i use java desktop application option to create a java desktop application.Then i get an error unable to get schemas.
Could anybody explain what this error is and how to solve this problem.
Thanking you ,
Mani.

Netbeans related questions belong in netbeans forums.
Alternatively look into JDBC
Mel

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

connect, then in SystemPreferences/Displays you can set the two as you want.

How to open my project library progress in timeline with FCPX 10.1?

So I've been having a huge problem with FCPX 10.1 and I cannot, for the life of me, figure out even what I'm supposed to ask--much less what the answer is.
So here's the basic problem. I don't know how to open my complete progress of a project library in the timeline. I have 5 projects, and two of them, for some reason unbeknownst to me, I just double click to bring up in the timeline. The other three, however, won't. Let me clarify more. One of the projects is not even showing up in the new 'Projects' sub-menu when selecting my library. The other two are showing up in the 'Projects' sub-menu, but aren't showing as having any content. Their time shows as 0:00. Now for one of the projects I mentioned before (the one that isn't even showing up in the 'Projects' sub-menu,) I know that its editing was saved because I worked on it several different times (having closed and opened FCPx in between) However when I was working on that video, I never removed it from my timeline. So whenever I opened FCPx, my progress it would just automatically pop up in the timeline.
My problem is this: I do not know where to reliably find my progress for my various project libraries and to open them in the timeline every single time.
If you need anymore information from me, please say so. My problem is very simply complex, because I'm just stupid enough with this software to not understand how to ask my question properly.
I worked on a specific project 3 weeks ago and I can't find the progress for it anywhere. I don't want to open specific clips in the timeline. During that project session, I had put all of my clips in the timeline and was editing them in specific ways that required them all being on the timeline so I could get a very specific and seamless effect. How do I get all of that progress into the timeline?

Okay so if I go into the sub-menu that pops up that contains all of my video and audio clips and right click the FIRST clip in my entire progress and load that into timeline, all of my progress is loaded as well--why is this the case? And why does the project itself show as having 00:00:00 progress in it?

How to open project in netbeans IDE

Similar Messages

Maybe you are looking for