How to open PSD files from lightroom

What's the easiest way to open a photo that was edited in LR and then passed to PS-CS3 and saved back to LR as a PSD. I can view the PSD photo in LR but then what's the quickest way to reopen it in PS to let's say make some more changes? Thanks.

Right-click on the psd in LR and select 'Edit in PHotoshop'.That will open it in Photoshop with its current filename or a new filename with Edit added to the end, with or without any LR edits you may have added to it.
Bob Frost.

Similar Messages

  • CS3 wont open .psd files from Lightroom

        I am working on a Mac in Lightroom 2.6, when I use the keyboard shortcut for open or toggle a file to open in CS3, the menus open alongside of the CS3 window but the images itself is not opening.  I attempted to use the selection edit in CS3 without success also.  I am able to use the selection edit in Photoshop Elements and the image opens in Photoshop Elements and I am unable to get the files/images to open in CS3.  I might have struck an errant key at some time.  I am about to pull what little hair I have left out.  If anyone has the cure or remedy, it will save me from being bald thanks

    Right-click on the psd in LR and select 'Edit in PHotoshop'.That will open it in Photoshop with its current filename or a new filename with Edit added to the end, with or without any LR edits you may have added to it.
    Bob Frost.

  • How to open NRW-files in Lightroom 4?I

    just bought Nikon's Coolpix P7800. It says you can shoot in Raw. Now I want to open these files in LR, just like I'm used to with my SLR's. But Nikon uses the NRW-format for Raw and LR says it doesn't recognise the files. Does someone know if there's a way to convert and work with these files in LR 4?

    Thanks Jim for your response,
    I will upgrade to 5.3
    Kind regardsEut van Berkum
         Op woensdag 28 januari 17:04 2015 schreef JimHess <[email protected]> het volgende:
    how to open NRW-files in Lightroom 4?I
    created by JimHess in Photoshop Lightroom - View the full discussionThe only way to use those files with Lightroom 4 is to convert them to DNG using DNG converter 8.3 or higher. The camera wasn't supported in Lightroom until version 5.3. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7140310#7140310 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7140310#7140310 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How to open PSD file recieved via email on iPad using Photoshop Touch without Creative Cloud?

    Hi, how to open PSD file recieved via email on iPad using Photoshop Touch without the need of using Creative Cloud? Thanks.

    Hi Super Nemo
    Currently the only way to open psd files on Photoshop touch is via the creative cloud. Also, the layers you created from Photoshop on your desktop machine will be flattened when opened with Photoshop touch on your iPad. But you can retain the layers from the touch app when opening the psdx file on your desktop photoshop.
    This link might help you: http://forums.adobe.com/docs/DOC-1336
    -Sharon

  • Can't open psd files from Bridge CS6

    Had both CS4 and CS6 installed, CS4 Bridge added itself when I wanted just CS6 Bridge, so uninstalled CS4.  Now cannot open psd files from SC6 Bridge.  What do I do?.

    What is Bridge doing when you try to open the PSD file?  Do you get a warning, does nothing happen?  Did you open the preferences in CS6 bridge and set the file opening preferences to make sure they are set to PS CS6?

  • Can photoshop CC open raw files from Lightroom 5?

    Trying to open raw files from Lightroom 5 in Photoshop CC 2014, with no luck.
    Anyone?

    Problems are as follows— all versions are current.
    1. When in Lightroom, trying to open a photo in Photoshop,-- choosing Photo>Edit in Photoshop CC 2014— Photoshop opens but no photo appears. The only time a photo opens is if it is a JPEG… CR2 does not open, dng does not open
    2. When trying to open a JPEG in Photoshop, dialog box opens offering choice between "Edit Original", "Edit a copy", or "Edit with Lightroom adjustments", Only choosing “Edit Original” allows photo to open.
    3. When in Photoshop choosing “Browse in Bridge” does not open Bridge… opens CC app and prompts me to install another version of Bridge, or keep version I have.  (See attached screenshot) Either way it’s a malfunction… as I said earlier all versions are leanest.
    PLEASE HELP!!
    Steve

  • TS4256 How to open .RAF files from Fuji camera?

    How to open .RAF files from Fuji camera in Aperture 3?

    Only these Fuji cameras are currently supported: http://www.apple.com/aperture/specs/raw.html
    Fujifilm
    FinePix S2 Pro
    FinePix S3 Pro
    FinePix S5 Pro
    FinePix X100**
    X-Pro1***
    X-A1***
    X-E1***
    X-E2***
    X-M1***
    X-T1***
    X20***
    X100S***
    If you have a different camera, use the software that came with your camera to develope the RAW files and convert them to a different lossless format, that Aperture recognizes.

  • Opening RAW File from Lightroom is automatically saving a PSD or TIFF. How to turn this off?

    I recently upgraded to LightroomCC and Photoshop CC however now when I go to open my RAW files from lightroom it is automatically saving a PSD copy when the file is opened.  I don't want it to do that because I don't need those files - for some of my stuff I just need to open the file, edit, and save a jpg when done.  This was not a feature on the older version of Lightroom and I can't find any place to turn this off. 
    Any help would be much appreciated!
    Thanks!

    Maybe this extension: Second Search 0.7.2012122901
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How to open NEF files in lightroom 4.4 ?

    im using Lightroom v4.4 how can i open NEF files to edit ?

    You have to update you LR 4.4 version to LR5.6. Since this version LR is able to open nef - files from Nikon's D810.
    The other way is to convert the nef-files to dng.
    Axel

  • Open PSD files from Bridge to Photoshop CS6

    In previous version I can open psd files to Photoshop with double clicks. Now it open to QuickTime only. How can I go back to the the old way? And I don't want to "place" the file to smart objerct either.
    Please help.

    Hi,
    In Bridge cs6 look under the Bridge preferences (Ctrl+K or Cmd+K) and then under File Type Associations, where you can choose the applications to open files from bridge.

  • How to open a file from a .war achive

              i can't open a file from a .war achive.
              i can open it before I packaged it to a .war.
              i must package it to a .war,how to do it.please help me!!!!!
              

    You can place your file in /WEB-INF and use
              ServletContext.getResourceAsStream("WEB-INF/...") to read it, or,
              if it is in the classpath (classes ir lib), you can use
              Class.getResourceAsStream().
              kai.yang <[email protected]> wrote:
              > i can't open a file from a .war achive.
              > i can open it before I packaged it to a .war.
              > i must package it to a .war,how to do it.please help me!!!!!
              Dimitri
              

  • How to open *.CR2 files from new 60D ??

    My Elements 7 will not open or recognize CR2 files from my new 60D.  Nor will it allow me to open CR2 files in another format.  I get error messages saying they are "the wrong type of file" or that a codec is missing.  It opens CR2 files from my two Rebels just fine.  I have downloaded the most recent codec (1.7.0) I can find from Canon to no avail.  I downloaded a trial version of Elements 9 - same problem.  Am I doing something incorrectly?
    Thanks, JackM

    Well, after downloading - and purchasing - PE9, and downloading ACR 6.2, am still having the same problem; not recognizing the 60D CR2 files.  I have actually downloaded the 6.2 several times, with and without unzipping and extracting files, to no effect.  I will try calling Adobe Monday to see what the heck is going on.  This is extremely disappointing.
    I may have to resort to use DPP for raw conversion, save as a TIFF, then open in PE for editing (this does work).  If that's my only option, I hope Adobe will refund my purchase price.  I'll try to keep you updated on what happens.
    Thanks for your help.
    JackM in Omaha

  • How to open a file from thumbdrive by Java!

    Can anyone reply me the Java sample code to open a file from thumbdrive. Currently I can only open files from my "C"Drive. The Drive which I will be using for my thumbdrive is F Drive.
    Thank you!

    Currently I need to make changes to this code so that it can read the "my file" from my f drive instead of the c drive.
    /public class Main {
    public Main() {
    public static void main(String[] args) {
    try {
    //Runtime.getRuntime().exec("cmd /c start myfile.doc");
    //Runtime.getRuntime().exec("cmd /c start \"myfile.doc\"");
    Runtime.getRuntime().exec("cmd /c start myfile.pps");
    //Runtime.getRuntime().exec("cmd /c start myfile.xls");
    //Runtime.getRuntime().exec("cmd /c start myfile.pdf");
    //Runtime.getRuntime().exec("myfile.doc");
    catch (Exception x) {
    x.printStackTrace();
    catch (Error e) {
    e.printStackTrace();
    }

  • How to recover my files from Lightroom Catalog?

    I lost my (NEF) files from hard drive.My Lightroom 1.4 Catalog is on separate hard drive.It is possible to recover my files?

    If you have no way of recovering the original .nef files then these are gone forever.
    The best then that you can hope for is to extract .jpg files from Lightroom's Preview files. These are in the .lrdata folder next to your catalog (.lrcat) files. Your results will also depend on the size/quality of previews that you had generated.
    If you are on Windows (I have only ever tried this on Windows Xp), then you can download lightroom_recover from here:
    http://www.ploki.info/index.php?pagename=Main.LightRoomRecover
    It will extract .jpg, but they have the same unwieldy names as Lightroom gives to the preview (.noindex) files.
    If you still have the disc from which you lost your .nef files it may be worth searching for a data/image recovery program or indeed having a look at recycle/trash first.

  • How to open RAW files from canon 1000D in Photoshop and Lightroom cc?

    Hi, I can't open my RAW files from my Canon 1000D in Photoshop and Lightroom cc (trial version) Also the DNG converter doesn't recognize the CR2 files. When I check the list with supported camera's the 1000D is there so it should be working. Anyone knows how to fix this? Thanks!

    You will likely get better program help in a program forum Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Maybe you are looking for