How to open settings when tap to click is disabled

How can i go to settings menu when tap to click is disabled

Hello J3FF1,
I assume you are talking about the touchpad on a laptop.
It helps to give as much info as possible when asking for help.
What is the model number of your system and the OS version?
You can navigate to the mouse/touchpad settings via the control panel. Find the Tapping tab or look for the Synaptics tab and locate Tapping from there to check or uncheck the box (depending on if your laptop is Synaptics or Alms based).
If for some reason its not showing up in the Settings window, you may need to install the touchpad driver for your system.
I would need to know what system you have in order to find the right driver in that case.

Similar Messages

Downloaded mt lion on my iMac, now when i start the computer my outlook email automatically opens. When I right click on the mail icon it isn't checked to open on startup. How do i correct this

downloaded mt lion on my iMac, now when i start the computer my outlook email automatically opens. When I right click on the mail icon it isn't checked to open on startup. How do i correct this

This is probabaly caused by the resume feature. When you log out, uncheck the box that appears.

How do I turn off tap to click on touchpad

How do I turn off tap to click on the touchpad. I have a windows 8.1 64 bit HP15-R264DX laptop

Hi Try this Go to your control panel,
Click on Hardware and Sound.
Once there, under Device and Printers, click on Mouse.
A small box (Mouse Properties) will open up.
Click on the "ClickPad Settings Tab".
Once there you will click on "ClickPad Disable".
A small box will open up letting you know that you are about to disable the only active Synaptics pointing device, just click OK.
You will then want to click apply, then OK

How do i sing out from hotmail/ how to open camera when i chat with messenger

how to i sing out from hotmail????????... it says coudn't sign out because web brower cookie........
how to open camera when i chat using messenger?????????

Thanks for your help - I am frustrated that I can't figure this out. I am not getting any error messages but here is what happes. I plug in the IPAD and it shows up in the left hand colum in itunes but it does not sync to ITUNES. When I click on the IPAD, it shows me the tabs but that nothing is actually on the IPAD hard drive. When I click on transfer files manually, the "apply" button does not work. When I turn off the transfer files, the apply button still does not work. So next, I tried the music button, and it does ask whether to "apply" but when I click on apply, nothing happens. Under the music tab, it only shows music that I purchased from ITUNES but not all the music that I purchased on CD and transfered to ITUNES.

Why cant it open something when tapping on it

i cant open anything when tapping on it.i can not scroll up and down on my i pod touch .please help!!!!!!!!

Go to Settings - General - Accessability - VoiceOver = Off. Note: you will need to use 3 finger scroll to access some menu items.
Stedman

How to restore iphone when it shows "iphone is disabled"

how to restore iphone when it shows "iphone is disabled"

See Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808
If your device has been modified, this will not necessarily work.

How to Open new screen for single click on ALV icon.

Hi All,
Can any body help me regarding the below ALV requirement.
I need to create a executable program ZPROGRAM with a table having field to store long text.The ALV report should display records according to the selection screen parameters with a icon in each record when clicked should open a new screen with present data in the field and must be able to save the entered long text.
Can any body give me the idea after displaying the simple ALV in the output,
How to open new screen(not the Pop-ups) after single click on the icon,
in that I should be able to modify & save the long text in my ZTABLE and
able to retrieve the same text for single clicked icon record.
which function modules/Classes/Methods can we use for this requirement.
And how retrieve the same text for this record.
Thanks in advance.
Regards,
Kalam A.

*& Report ZTEST_ALV
REPORT ZTEST_ALV.
TYPE-POOLS slis.
DATA: gt_fieldcat TYPE TABLE OF slis_fieldcat_alv .
DATA: gs_layout TYPE slis_layout_alv.
DATA: gt_list_top_of_page TYPE slis_t_listheader.
DATA: gt_sortinfo_alv   TYPE slis_t_sortinfo_alv.
DATA: gs_print_alv TYPE slis_print_alv.
DATA: gs_grid TYPE lvc_s_glay.
DATA: gt_event TYPE slis_t_event.
DATA: gs_event TYPE slis_alv_event.
DATA: BEGIN OF GT_DISPLAY OCCURS 100.
   INCLUDE STRUCTURE MARA.
   DATA: BOX.
DATA: END OF GT_DISPLAY.
START-OF-SELECTION.
SELECT * FROM MARA UP TO 50 ROWS
INTO CORRESPONDING FIELDS OF TABLE GT_DISPLAY.
End-of-Selection.
PERFORM build_alv.
PERFORM display_screen .
FORM build_alv .
DATA: ls_fieldcat LIKE LINE OF gt_fieldcat.
DATA: ls_top TYPE LINE OF slis_t_listheader.
DATA: ls_sort TYPE slis_sortinfo_alv.
CLEAR: ls_fieldcat, gt_fieldcat[], ls_top,gt_list_top_of_page[],
         ls_sort,gs_grid,gs_print_alv,gt_sortinfo_alv[].
*&-----gs_layout definition.
gs_layout-zebra = 'X'.
gs_layout-detail_popup = 'X'.          "ÊÇ·ñµ¯³öÏêÏ¸ÐÅÏ¢´°¿Ú
gs_layout-f2code = '&ETA'.             "ÉèÖÃ´¥·¢µ¯³öÏêÏ¸ÐÅÏ¢´°¿ÚµÄ¹¦ÄÜÂë,ÕâÀïÊÇË«»÷
gs_layout-no_vline = ' '.              "ÉèÖÃÁÐ¼ä¸ôÏß
gs_layout-colwidth_optimize = 'X'.     "ÓÅ»¯ÁÐ¿í
gs_layout-detail_initial_lines = 'X'.
gs_layout-coltab_fieldname = 'LINE_COLOR'. "Line_colorÎªgt_displayµÄÒ»¸ö×Ö¶Î,¾ßÌåÑÕÉ«ÉèÖÃ¼ûÏÂÃæËµÃ÷.
gs_layout-hotspot_fieldname = 'MATNR'.
gs_layout-detail_titlebar = 'ÏêÏ¸ÄÚÈÝ'. "ÉèÖÃµ¯³ö´°¿ÚµÄ±êÌâÀ¸
gs_layout-group_change_edit = 'X'.
*&-----gs_grid definition.
gs_grid-top_p_only = 'X'.
*&-----gs_print_alv definition.
gs_print_alv-prnt_title = 'X'.
gs_print_alv-prnt_info = 'X'.
*&-----gt_sortinfo_alv definition. Ð¡¼Æ
ls_sort-fieldname = 'MTART'.
ls_sort-tabname = 'GT_DISPLAY'.
ls_sort-subtot = 'X'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO gt_sortinfo_alv.
ls_sort-fieldname = 'AENAM'.
ls_sort-tabname = 'GT_DISPLAY'.
ls_sort-subtot = 'X'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO gt_sortinfo_alv.
*&-----slis_t_listheader definition. title.
CLEAR ls_top.
ls_top-key = 'µ±Ç°ÈÕÆÚ:'.
ls_top-typ = 'S'. " H = Header, S = Selection, A = Action
CONCATENATE sy-datum0(4)   '-' sy-datum4(2) '-' sy-datum+6(2) INTO ls_top-info .
APPEND ls_top TO gt_list_top_of_page.
CLEAR ls_top.
ls_top-key = 'title'.
ls_top-typ = 'S'. " H = Header, S = Selection, A = Action
ls_top-info = space.
APPEND ls_top TO gt_list_top_of_page.
*&-----gs_print_alv definition.
gs_print_alv-prnt_title = 'X'.
gs_print_alv-prnt_info = 'X'.
*&-----gt_fieldcat definition.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name     = sy-repid
     i_internal_tabname = 'GT_DISPLAY'
      i_structure_name = 'MARA'
      I_CLIENT_NEVER_DISPLAY = 'X'
     i_inclname         = sy-repid
   CHANGING
     ct_fieldcat        = gt_fieldcat[]
   EXCEPTIONS
     inconsistent_interface = 1
     program_error          = 2
     OTHERS                 = 3.
ls_fieldcat-hotspot = 'X'.
MODIFY gt_fieldcat FROM ls_fieldcat INDEX 2.
**-1. definition with macro.
DEFINE macro.
   col_pos = col_pos + 1.
   ls_fieldcat-tabname   = 'it_typ_data'.
    ls_fieldcat-fieldname = '&1'.
    ls_fieldcat-seltext_l = &2.
   ls_fieldcat-col_pos   = col_pos.
    ls_fieldcat-outputlen = '&3'.
   ls_fieldcat-datatype = '&4'.
   ls_fieldcat-do_sum    = &5.
   ls_fieldcat-edit    =   &6.
   ls_fieldcat-checkbox =   &7.
   ls_fieldcat-key   =   &9.
   ls_fieldcat-fix_column = &10.
   ls_fieldcat-no_out = &11.
    ls_fieldcat-ref_fieldname = &4.    " System F4 Effect.
    ls_fieldcat-ref_tabname   = &5.   " System F4 Effect.
    ls_fieldcat-hotspot   =   &6.
    append ls_fieldcat to gt_fieldcat.
    clear ls_fieldcat.
END-OF-DEFINITION.
macro matnr     'matnr'            18   'MATNR'   'MARA' 'X'.
macro MTART     'MTART'            18      'MTART' 'MARA' ''.
macro AENAM    'AENAM'            18       'MAENAM' 'MARA'   ''.
**-2. definition one-by-one.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-seltext_s = 'ÎïÁÏ'.
ls_fieldcat-ref_fieldname = 'ROLLNAME'.
ls_fieldcat-ref_tabname   = 'DD03L'.
APPEND ls_fieldcat TO gt_fieldcat.
ENDFORM.                    "build_alv
FORM display_screen .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type     = 0
   IMPORTING
     et_events       = gt_event
   EXCEPTIONS
     list_type_wrong = 1
     OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_event INTO gs_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
   gs_event-form = 'TOP_OF_PAGE'.
   MODIFY gt_event FROM gs_event INDEX sy-tabix.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
    i_callback_pf_status_set          = 'PF_STATUS_SET '
     i_callback_user_command           = 'USER_COMMAND'
    i_callback_top_of_page            = 'TOP_OF_PAGE'
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = 'ALV_BACKGROUND'    "When top-of-page is initial.
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     is_layout                         = gs_layout
     it_fieldcat                       = gt_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = gt_sortinfo_alv[]
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
   I_SAVE                            = 'A'
IS_VARIANT                        =
IT_EVENTS                         = gt_event
IT_EVENT_EXIT                     =
   IS_PRINT                          = gs_print_alv
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_display
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_screen
FORM user_command          USING ucomm LIKE sy-ucomm
                           selfield TYPE slis_selfield.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR' "Check Box need fieldcat-checkbox, input and edit.
     IMPORTING
       E_GRID = ref1.
CASE ucomm.
    WHEN '&IC1'. " SAP standard code for double-clicking
READ TABLE gt_display INTO gs_display INDEX slis_selfield-tabindex.
CHECK sy-subrc = 0.
     CASE selfield-fieldname .
       WHEN 'PLNUM'.
         SET PARAMETER ID 'PAF' FIELD gs_display-plnum.
         CALL TRANSACTION 'MD12' AND SKIP FIRST SCREEN.
       WHEN 'POSNR'.
       SUBMIT rvscd100 USING SELECTION-SCREEN '1000' WITH vbeln = gs_display-vbeln
                                                      WITH posnr = gs_display-posnr
                                                      WITH zinfo = 'X'
                                                      AND RETURN.
     ENDCASE.
   IF selfield-sel_tab_field = 'OUT_ITAB-PI_SL'. " Line detail.
       READ TABLE i_output INTO pisl_itab INDEX selfield-tabindex.
       IF sy-subrc EQ 0.
   ENDIF.
    WHEN 'CHANGE'.
     CALL METHOD ref1->check_changed_data.
     CALL METHOD ref1->refresh_table_display.
*5´Ë´¦´úÂë×èÖ¹'REUSE_ALV_GRID_DISPLAY´´½¨ÐÂµÄÆÁÄ»£¬Ôì³ÉÆÁÄ»¶à²ã
     selfield-refresh = 'X'.
    WHEN 'SWITCH'.
     PERFORM switch_edit_mode.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
Add your code in user_command form.
WHEN you click matnr ucomm eq '&IC1'.
Message was edited by:
        Chunhai Hu

LightRoom 2.3 Does not show up in "open With" when image right clicked..Why?

Hi,
I noticed that when I right click on an image and highlight OPEN WITH LightRoom does not show up as a choice.. Just CS4 and other programs. Is there a way to get it to show up?

You can do it. Right-clicking and "opening with" LR is no different than dragging a file from Windows Explorer into the grid view. In either case the import dialog will be launched. If it's already in the catalog you'll get that dialog.
Windows is seemingly unpredictable from time to time as to adding file associations to the context menu. In any case, if you go to the bottom and click "choose program" you can select LR from the expanded list, or navigate to find it if necessary (which shouldn't be necessary).
Typically once you choose it once, it will continue to appear in the short list for that file type, though it depends what new pieces of software you install and how they're associated with file types either upon or after installation.
You can also drag the file(s) from your Explorer window into the grid view, or drag onto the LR icon on your desktop or in your quick launch, which will launch LR and bring up the appropriate dialog.

How to open a file by double clicking in an RUNNING exe built by LabVIEW

I am developing an applicationg using LabVIEW. But found some difficulties.
This is an editor, and I link this app to a certain file format.
So I hope when I double click this file, My exe will load it. This could be done by read application command line.
But if my exe is runing already, I double click the file, I could not get the latest command line information.
When the exe is running, How doule click the file to send some sort of info the this exe so the exe could open a new one.
How to do this in LabIVEW?
Solved!
Go to Solution.

Hi,
You have to make the Vi reentrant so that it does not share the same memory location:
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway

Anyone know code to open browser when JButton is clicked...Urgent!!!!

Hello there,
Does anyone know how to open a browser (i.e., i want to run servlet program http://localhost:8080/register.html) when JButton is clicked.
Any help will be appreciated..please
Sangeetha.

Hi
on the onclick event of the JButton give this code
if ur working on WIn NT
try {
     Runtime r = Runtime.getRuntime();
     r.exec("cmd /c start iexplore");
     }catch
     (Exception e) {}

How to open object, when I use SMW0

Hi, Expert:
when I use to tcode SMW0. I can see some template object Z_CUST_CREATION_NOTIFICATION_ENGLISH. how to open this object.
Thanks,

One way is .. select that object and push the Export (Shift+F7)... and save it to local disk and view it.
Regards,
Naimesh Patel

Where is PLIST to "OPEN WITH" when you right click on a file ?

When I right click on a file to open it using the "OPEN WITH" command it shows two or three of the SAME applications. For example it shows preview, preview, and preview if I right click on a picture on my desktop. These are ghost icons that all open the same version of preview.
I think a plist file is messed up but what one takes care of the 'OPEN WITH' command when you right click on an icon?
I would like a few opinions of possible or any ideas.
These started after I cloned my hard drive. I cloned it with three different applications and all produce the same results.
Thanks

red_menace you are Not a menace. You are a genius. It fixed my problem!
I put this code in the terminal:
/System/Library/Frameworks/ApplicationServices.framework/\Frameworks/LaunchServi ces.framework/Support/lsregister \-kill -r -domain local -domain system -domain user
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart.
IT WAS FIXED!!!
THANKS A MILLION!!

How did my pdf files get converted from 'open with Adobe Reader' to open with Adobe Acobat'? And if I have a ''free'' Acrobat account why does it not open? When I do click on the account it ask me to pay $89.99. I never wanted Acrobat. How can I get -

How did my stored files get converted from 'open with Adobe READER' to 'open with Adobe ACROBAT'? How can I get them re-set to open with 'Adobe Reader'?
Please reply to my e-mail: [email protected]

It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this.

How do I change: when I double click on a day to add a new event it defaults to All Day and Busy

iCal 5.0.2 (1571) Is there any way to change this? I can't do it in preferences.
This is a real pain. To make an event for a specific time I have to double click again, uncheck "All Day" and then put in the time for the start of the event. Even then, if I put in the start time, the end time remains at 6:30 PM, so I have to change that too.
If I really do want an All Day event, why does it sometimes default to Busy, rather than always to Free?
The old iCal was far superior in this regard; double click once on a day and the add an event dialogue box appears, defaulting to a time close to when you were making the event, and, if my memory serves correct observing the preference I set with respect to default length of the event.
I'm aware that Command N gets me a new Quick Event, its a bit better in that if the event i enter opens the big "add an event dialogue box", it has defaulted to an hour long event. But, if I click on a day, and then hit Command N, the new event is put in Today, and not the day I had selected. It also defaults to All Day, unless I put in a time for the event in the Quick Event box. Why would I do that when I know I want to enter info into a number of fields, and doing so is easiest from the big dialogue box. If i don't enter a time in Quick Event, or enter a day, I still have to double click the event that was created by Quick Event to open the big dialogue box, and start fresh entering everything. So, I find Quick Event's implimentation cumbersome, overall ending up with more keystrokes and clicks to enter the details I normally enter, than the old iCal.
So, if someone knows how to change the double click behaviour back to the old way, or how to get Quick Event to open the dialogue box on the day i have already selected, any help will be appreciated.
Also, is there some way to get this feedback to Apple? Support SiteMap doesn't show a link for feedback.
Thanks
Ian

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

How to open a second grid, by clicking on first grid

Hi
On my htm page, i have a grid, by clicking on any of row of the first grid, i want to open a second grid, below the first gird, which will contain only the values of that row.
For the first gird, I am using the code      <PARAM NAME="DoubleClickEvent" VALUE="Doubleclick">
and i have written a function as Doubleclick in the java script.
Now want code i should write under the function (Doubleclick) in the java script.
Can you help me out with the code for the same.
thanks,
Ashish

Hi
Padma,
I am new to this technology, can u tell me how to hide the second grid, what code i should add in the applet.
And my grid is containting the following data:
Airline             AirportTo        AirportFrom      Price
Jet                     BOM                 DEL                    4500
Kingfisher           PUN                  IND                     4000
Say, now when i will select 2nd row, my second grid should get following data
Airline             AirportTo        AirportFrom      Price
Kingfisher           PUN                  IND                     4000
Can you explain the code more in detail.
thanks,

How to open settings when tap to click is disabled

Similar Messages

Maybe you are looking for