How to open the casing for N73

How do I open the casing for Nokia N73 'cause I have two buttons' that's jammed and the only way to repair it is to open the casing... Can anyone please help me?!

go to Nokia care point and you'll get it fixed
or go to an expert
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Similar Messages

  • I downloaded Aperture and now I'm getting a "There was an error opening the database for Library " and I can't do anything else.  How can I fix it so I am once again able to run Aperture?

    I Downloaded Aperture from the Apple Website then proceeded to download all my picture's frp, IPhoto.  The very next time I opened Aperture an error poped up stating, There was an error opening the database for Library "blank".  I can't do anything with the program but hit the cancel buttom which closes the program.  How do I fix it?

    Is "blank" the name of your Aperture Library? If not, then Aperture is pointing to the wrong Library. Hold down the option (⌥) key while you launch Aperture by clicking it in the Applications Folder. Then select the correct library and press the "choose" button.
    If that does not help, try to repair your library:
    Locate Aperture library in Finder. Holding down the keys option (⌥) +command (⌘) and double click on Aperture Library to show the First Aid dialogue:
    Then try to start Aperture again.  If that also should fail, try the other steps in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
    Good Luck
    Léonie

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Aperture (3.4.1) no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary." How can I solve this problem? Thanks

    I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
    How can I solve this problem?
    Thanks

    After a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
    Have you tried the Aperture Library First Aid Tools?
    Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
    Try "Repair Database", and if this does not help: "Rebuild Database"
    Regards
    Léonie

  • There was an error opening the database for the library "/Users/stacia134/Pictures/Aperture Library.aplibrary".  Why am I getting this message and how do I correct it so that I can open Aperture????  any suggestions would be most appreciated

    There was an error opening the database for the library “/Users/stacia134/Pictures/Aperture Library.aplibrary”.  Why am I getting this message and how do I correct it so that I can open Aperture????  any suggestions would be most appreciated

    Then I'd check the system drive, if it has problems.
    To check your System drive boot into the Recovery Partition, see: OS X Lion: About Lion Recovery
    Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up.
    You will see a panel, where you can use Disk Utility to check your System Drive.

  • Library recovery: how can I recover a library after I get this message: There was an error opening the database for the library "/Users/Jim/Pictures/Libraries/K2 Library.aplibrary"???

    Library recovery: how can I recover a library after I get this message: "There was an error opening the database for the library “/Users/Jim/Pictures/Libraries/K2 Library.aplibrary”???

    Thanks a lot, Frank. The lsregister did the trick! I am testing this on 10.8.2.
    http://support.apple.com/kb/TA24770 : I deleted the "com.apple.LaunchServices.plist", and restarted the Finder, even logged off and on again; did not change anything. The file has not been recreated, so it may not be used anymore.
    http://itpixie.com/2011/05/fix-duplicate-old-items-open-with-list/#.ULZqa6XAoqY
    The direct "copy and paste" from the post did not work: I had to retype it :
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
    but then it worked like a charm!
    Cheers
    Léonie
    And btw: I turned on the "-v" option for the lsregister to see, what was going on, and saw plenty of error messages (error -10811); so I repeated the command with "sudo". After that I still saw five iPhotos. Repeating as regular user finally got rid of the redundant iPhoto entries. It looks like registering as super user may be causing this trouble.

  • When opening aperture I get Warning that says There was an error opening the database for the library "~/Desktop/Feb 12, 2011.aplibrary".  I'm concerned that my pictures may be lost.  Does anyone know how to deal with this Warning?

    When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.”  That's it. The program does not open at all.  I'm concerned that my pictures may be lost.  Does anyone know how to deal with this Warning? 

    Might just need to rebuild the library...see this link:
    Aperture 3: Troubleshooting Basics

  • When I open the word for mac, I could not see the Turkish characters. How can I fix it?

    When I open the word for mac, I could not see the Turkish characters. How can I fix it?

    Ask in the MS Office forums - http://answers.microsoft.com/en-us/mac.
    Good luck,
    Clinton

  • HT1529 how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

    how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

    The reason it will not be in the sent folder is, it failed to send.
    If it failed to send, then you will see the Outbox icon. 'Pending' would be a more descriptive name.
    When it eventually sends, the Outbox will not show in the Mail app interface.
    Until it is sent it will stay stuck in the Outbox.
    If it refuses to send, you can manually delete it in Finder, at the location ~/Library/Mail/Mailboxes/Outbox.mbox
    Close Mail first, before you search for that email using the Finder.
    Mail version 4.6. Mac OS version 10.6.8

  • "There was an error opening the database for the library "~/Pictures/Apert"

    Hey everyone,
    There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
    So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
    There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
    One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
    Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
    ⌥-click Aperture (not the library)
    You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
    Close Aperture
    ⌃-click both the old and new libraries and "Show Package Contents."
    Open the folder "Database" in both libraries.
    Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
    Close both folders.
    ⌘⌥-click the old library.
    NOW, I got the Aperture Library First Aid dialog.
    Rebuild the library (3rd option)
    Wait a while.
    Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
    This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
    As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
    Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

    Hey All,
    To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
    "There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
    I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
    Does anyone know away to get it to work again and have the edits still there?
    I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
    Does apple have a support number I can call? Any help would be greatly appreciated!!

  • How to open the Data Perspective function of Smart View in EAS?

    How to open the Data Perspective function of Smart View in EAS?
    I use my Smart View to connect one ASO cube, and I found the button of Data Perspective is grey. It's not available.
    In Smart View Users' Guide, it says:
    Note: Data perspective may not be enabled in your Smart View system. Your options for data perspective are enabled and configured by the administrator in Oracle Essbase Administration Services.
    But I could not find how to configure the this option in EAS.
    Does anyone know about this?

    I have already turned on the varying attributes function, but the data perspective button is still grey, not available.

  • How to open the second VM in Oracle 11gR2 2-nodes RAC system ?

    Folks,
    Hello. I have been installing Oracle Database 11gR2 RAC system using 2 nodes that are 2 Virtual Machines (rac1 and rac2) on the top of VMPLayer 3.
    I follow the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html to do.
    The original Virtual Machine rac1 has run correctly. I configure rac1 network (eth0 and eth1) by opening VM rac1 and using command "[root@rac1\] #neat" as root user to invoke the network configuration.
    For the second Virtual Machine rac2, I simply copy all files in "C:\VM\rac1" into "C:\VM\rac2". Then I have done the following:
    1) In the directory "C:\VM\rac2", rename "rac1.vmx" to "rac2.vmx".
    2) Change display name from "rac1" to "rac2" in the file "rac2.vmx".
    The next thing to do for rac2 is to open the Virtual Machine rac2 and configure its network (eth0 and eth1) by using the command "[root@rac2\]#neat" as root user.
    But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1).
    Can any folk tell me how to open the VM rac2 to configure its network by this step ?

    Hi,
    But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1)."rac2" is a new virtual machine after you copied and changed the display name and you need to add this in the vmware enventory (I am talking about vmware server and vmware player should have the same way as it is supposed to run multiple vritual machines on your PC). Then it will be visible it to you. Now start this new machine and edit the network configuration.
    Salman

  • How to open the body of nokia N72

    It seems that some moisture has entered my Nokia N72 since last 10 hours the screen appears grey and there is a display problem. Can any one help me by showing me how to open the body of Nokia N72 by step by step description or diagrammatically?

    Sorry but it is against the rules of this forum to discuss warranty voiding procedures like disassembly, regardless of your personal warranty status.
    Try one of the many unofficial forums, that you can find by searching google, for help. 

  • How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R$ 999.00

    How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R $ 999.00

    If the device has not been opened by anyone (other than Apple) then it can be replaced via the Out of Warranty replacement program, $269US for the 5, 5C, and 5S?
    If it has been opened by anyone other than Apple, purchase a new device.

  • How to find the patches for perticular concurrent program

    HI
    How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
    Thank's

    Query the concurrent program in Sysadmin responsibility.
    Note the concurrent executable.
    Query the concurrent executable in Sysadmin.
    Note the file name.
    If it is a package, open the package in TOAD and note down the file name.
    If it is a report/form, open it in form developer and note down the file name.
    Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
    Hope this answers your question
    Sandeep Gandhi
    Independent Consultant
    513-325-9026

Maybe you are looking for

  • Remote not working at all

    I just hooked up my apple TV (that we got 2 years ago) for the first time today.  I get the main language screen and then the random photos on my TV.  the apple tv has a white light but will not do anything when I try to use the remote.  could the ba

  • RFC Import from own SAP XI results in java.lang.NullPointerException

    Hi All, I'm trying to do an import of a local RFC (developed in SAP XI) but this results in a java.lang.NullPointerException RFC import from other SAP system is no problem. Anyone an idea? Cheers, Frank

  • Problem while uploading data with GUI UPLOAD Function

    Hi,   I am facing problem while uploading data with FM GUI UPLOAD    in out text file there are 7 row  but after the FM GUI UPLOAD  there are 14 entries are coming in Internal table   and each alternate row is coming as blank  with  0000 in some colu

  • Install error message

    I'm a Dreamweaver 8 user. I recently tried to install the trial version of Dreamweaver CS3 . Every time my computer finishes the installation I receive a error reading in the dialogue box that reads, "component install error" next to a red X. I've un

  • The computer that had my itunes crashed, how do i move it to know one

    I need help, The computer that i had my Itunes on crashed, so how do i get it onto my new one?