How to open up the notebook and replace the Memory (Ram)

i want to add 4 GB 1600 MHZ to my laptop but i dunno how to open the laptop can somebody can give me a Guide or something?

I hope you are outside of the warranty period (standard warranty is one year) if you are opening it up.  
Follow the instructions at this Insidemylaptop tutorial..
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • I have new memory modules, 2x2 2GB DDR2 --800 SO DIMM0 to install in I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.

    I have new memory modules, 2x2 2GB DDR2 --800 SODIMM MAC to install  into I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.

    https://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2111+RAM+Replacement/5196

  • Satellite U845W-S400 - how to open-up the laptop to put in a SSD

    Hello everyone,
    I would like to know how to open-up the laptop to put in a SSD.
    It has 6 screws on the bottom and I assume some under the keyboard.
    I do need a guide however to know for sure where they are before I start prying things open and might even damage it.
    Any help would be really appriciated since i could not find any on the web.
    Kind regards,
    Robin

    First of all thank you both for your reply's.
    My friend bought the laptop in the USA and the salesman also sold him an SSD. So far so good, i can understand the point of view and advantages to the original HDD that it holds at the moment.
    As far as warranty concerned it is of no problem and i am aware of the possible consequences. This is not the first notebook i have opened up and the minilaptops and such sort are indeed a bit tricky. Usually there are screws concealed underneath the keyboard.
    Just unscrewing the ones on the bottom does not release the bottom cover. Prying the keyboard loose is possible but i have got patience and i would like to know if someone has the exact answer :) Dont want to risk damaging it.

  • How to Open & Close the periods in Asset Accounting for Depreciation.

    Dear All,
    How to to How to Open & Close the periods in Asset Accounting for Depreciation ? Please let me know
    If there is any T.Code or procedure for it.
    Your help is highly appreciated.
    Thanks & Regards,
    Pankaj.

    Dear Alex ,
    1) I am facing one problem that one of my asset 123 I Capitalized on 13.09.2006 have deactivated on
    14.05.2008. with value of Rs.1.00.000/- all the activities are closed down related it on deactivation date.
    In 2009 a new asset 456 purchased with different value. But in T.code OARP in column cumulative acquisition
    value it is showing value of Asset 123 instead of it's own capitalization value.
    2 ) And about my Asset 123 it is also showing a Cumulative Acquisition value in year 2009 which it
    should not display because I have already deactivated that asset. ( The same checked in AR03 )
    Please help.
    Your help is highly appreciated.
    Regards,
    Pankaj.
    P.S :- Keep the discussion on for further assistance.

  • How to open a pdf file and then attach it with images

    I am new to Indesign Server.
    I'm currently working on a pdf.
    I have a white blank pdf template.
    that I want to attach/glue it with images.
    How to open a pdf file and then attach it with images.
    Please, help me.
    Thanks.

    First step would be to make yourself familiar with InDesign desktop version.
    Whatever you intend to achieve, do it there manually. (see regular app docs or forums)
    Then try to automate your steps with scripting (see scripting docs or forum)
    If you can do it with a script in the desktop version, that script will likely also run in ID Server. (see server forum).
    If you can specify missing features not achievable thru scripting or manual use, reconsider to write a plugin (this forum).
    A seasoned C++ programmer will need a few months to learn the basics, wade thru tons of documentation etc. Alternatively consider to hire a consultant to do the development work for you.
    Dirk

  • How to open all the pages of a file PDF in Photoshop?

    Hi,
    How to open all the pages of a file PDF in Photoshop?
    Or
    I need to know the amount of Pages in PDF.
    Example:
    >Set MyPhotoshop = CreateObject("Photoshop.PDFOpenOptions")
    Set MyOpenPref = CreateObject("Photoshop.PDFOpenOptions")
    sFileName = "C:\Temp\Myfile.pdf"
    >With MyOpenPref
    .AntiAlias = True
    .Mode = psOpenCMYK
    .Resolution = 72
    .BitsPerChannel = psDocument8Bits
    .CropPage = psBoundingBox
    .Page = 4
    .SuppressWarnings = True
    End With
    >MyPhotoshop.Open sFileName, MyOpenPref
    I need help.
    Thanks

    http://www.ps-scripts.com/bb/viewtopic.php?t=1882
    Have a look at this thread, the last entry has the full code and has everything you need there.
    The answer to knowing how many pages is, you don't need to know!
    You use SL code and no error and no page is opened. Thats the crux of the code.

  • I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?

    I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?  I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

    Hey there TowneJ,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
    If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
    So long,
    -Jason

  • How can I disable the memory sharing with the video?

    how can I disable the memory sharing with the graphic card? it makes me impossible to run a software, grandMA2, on windows 7 installed and run via bootcamp. where should I look for changing the preferences of memory and video, on lion or on windows7? thank you

    so what do you think. I run a software on windows 7 running via bootcamp on my mbp, but I can't open it. the software is compatible with windows 7 on mac. I tried opening it as administrator or changing the compatibility options, like running it as windows xp, and changing the resolution of the video. it can't build the window and then it crashes. on internet I found a compatibility list of the software where it says please do not use any shared memory for the graphic card. what does it mean? I have just to remove the check in automatic graphics switching? what should I try to do? thank you. 

  • How do i format the memory card on n78

    how do i format the memory card on my n78? do we another application to do it? can i do it with my nokia? the music player keeps on searching for files non stop and i wanna know if formatting the memory card solves the problem
    Solved!
    Go to Solution.

    29-Oct-2008 02:05 PM
    grschinon wrote:
    29-Oct-2008 01:48 PM
    grayburn wrote:
    BTW i didn't say anything about looking in the file manager.
    You should have because that's how to do it on FP2 phones such as the N78 and N96.
    Menu > Tools > File manager
    Go into the "Memory card" section, then:
    Options > Memory card options > Format
    Learn something new everyday.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • How do I solve the memory problem ( 5 beeps ) upon startup?

    hp compaq d530SFF,  how do I solve the memory problem (5 beeps ) upon start up?

    Hi:
    You already know the answer to that! 
    http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/when-I-try-to-boot-up-lighs-flash-red-and...
    Paul

  • How can we free the memory of array

    how can we refresh the memory of an array every time......if we want new values or fresh values each time.........becuase array index out of exception error is coming up and i want to deallocate the memory at the end of iteration or in the starting

    how can we refresh the memory of an array every
    time......if we want new values or fresh values each
    time.........becuase array index out of exception
    error is coming up and i want to deallocate the
    memory at the end of iteration or in the startingThis post consist of 95% gibberish. The only part that is not gibberish is "array index out of bounds exception" and that has nothing to do with memory at all.
    Please attempt to learn some basic Java before injuring yourself permanently.
    Sun's basic Java tutorial
    Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
    http://javaalmanac.com . A couple dozen code examples that supplement The Java Developers Almanac.
    jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
    JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
    Bruce Eckel's Thinking in Java (Available online.)
    Joshua Bloch's Effective Java
    Bert Bates and Kathy Sierra's Head First Java.
    James Gosling's The Java Programming Language. Gosling is
    the creator of Java. It doesn't get much more authoritative than this.

  • How can i save some image- profiles in the memory (RAM) of a system?

    How can i save some  image- profiles in the memory (RAM) of a system?
    (and then I want to read out the memory and save the profiles in a HDD, but first it has to write in a memory, because the write-speed is better by the memory )

    There must be an underlying premise for this question that I'm missing... When you run code everything is in memory... Programming 101. Create a variable, set a value to it, and it's in memory. Create a front panel control set a value to it and it's in memory. Data carried by the wires you use to connect your code is in memory. Or are you asking about controlling how that memory is managed - physical vs swap file?

  • How best to configure the memory allocation

    Hi,
    Anyone could advise how best to configure the memory allocation by setting up
    the value for
    -Xms
    -Xmx
    -XX=NewSize
    -XX=MaxNewSize
    -XX:SurvivorRate
    -XX:MaxPermSize
    for weblogic Express 8.1 and the server has about 4G RAM ?
    Thanks.

    Hi Chandra,
    "Chandra" <[email protected]> wrote in message news:[email protected]..
    Anyone could advise how best to configure the memory allocation by setting up
    the value for
    -Xms
    -XmxSet -Xms == Xmx == 512m
    -XX=NewSize
    -XX=MaxNewSize
    -XX:SurvivorRate
    -XX:MaxPermSizeSet -XX:MaxPermSize == 64m
    and see how it goes.
    for weblogic Express 8.1 and the server has about 4G RAM ?This is way too much for a single weblogic instance. Normally 512-1024Mb
    is enough. I'd consider partitioning it to multiple instances with that much
    of memory. Lesser memory means faster GC.
    HTH
    Regards,
    Slava Imeshev

  • How do I select the correct ram for upgrade to iMac 8,1?

    How do I select the correct ram for upgrade on my iMac 8,1? When I look up information online, I believe that I have SO-DIMM ram. Do I need to purchase SO DiMM? I want to upgrade to Maverick and I think I was told that I need DDR2 or SDRAM. My model # is A1224, if that helps.

    Welcome to Apple Support Communities
    OS X Mavericks requires 2 GB of RAM at least, but I recommend at least 4 GB of RAM.
    You have got an Early 2008 iMac. You can buy more RAM at OWC or Crucial. Your Mac supports 6 GB of RAM

  • エラー Could not complete the Open command because there is not enough memory(RAM).

    Windows 版 Adobe Photoshop CS6 13.0.1（32 ビット）を使用して JPEG 2000 ファイルを開くと、エラー　“Could not complete the Open command because there is not enough memory(RAM)”を発生しました。
    詳しい情報：
    http://helpx.adobe.com/jp/photoshop/kb/cq04220115.html
    上記の文書を参考にしてください。

    リンク先に下記のように書かれています。
    追加情報 （Additional Information）
    Photoshop CS6 に付属の JPEG 2000 プラグインに問題があることが確認されています。開発チームは現在、問題の修正に取り組んでいます。
    修正の取り組みはいつまでかかるのでしょうか？
    Photoshop CS5 に付属の JPEG 2000 プラグイン を入れれば直るなら、
    Photoshop CS5 に付属の JPEG 2000 プラグイン配布するのは無理なんでしょうか？

Maybe you are looking for