How to optimize the number of battery cycle count?

Hello,
I'm using my MBP Retina display (Mid 2013 model) and I just found out my battery cycle count is 143. It's been a year since I bought it. Is that count normal? I don't use my laptop other than using it for browsing, Skype calls and word processing. I leave it charged all day and in the evening I use it up until a 60% charge is left. I can avoid this and leave it unplugged. Should I leave it unplugged and use the battery only when it is absolutely necessary to do so, to keep my battery cycle count low? Please suggest and thanks.

Hello,
i may be wrong but I think the number of the battery's cycle is implemented by 1 each time you recharge to 100%. Even if you were for example at 70%, when you plug the charger to reach 100% it is counted as a cycle.

Similar Messages

OATS: How to return the number of tabs (tab count) in ADFPannelTabbed

Question: I have a ADFPannelTabbed Object wherein I want to validate whether a particular tabname exists or not. At present we have something like this: adf.panelTabbed(tabObject).GetText(1) and adf.panelTabbed(tabObject).GetText(2) and so on. However I want the count of the tabs that are available under adf.panelTabbed(tabObject), so that I can loop through it and check the tab existence based on the i value. something like below
For i=0 to tabcount
StrTabName = adf.paneltabbed(tabObject).GetText(i);
If(StrTabName.equals(MyInput){
info("PASS");
How to get the tabCount in this case.
URL: http://sc4512fwks.us.oracle.com:7111/productLifecycleManagement/faces/index.jspx
Steps: 1. Click on Concepts link
2. login with product_manager/Welcome1
3. Click on Create Requirement Specification
4. Enter Data and click on Save and close (Choose CreateNew radio button before saving)
5. The requirement gets created in a new tab and now I need to validate if the ADFPanel with tabName = "the one that is created in this flow" Exists.
Regards,
Kumari
Edited by: 837525 on Jun 26, 2012 4:14 AM
Edited by: 837525 on Jun 26, 2012 4:15 AM

Hi Vicky Sai,
The standard report is S_PH9_46000223 - EEs Entered and Left
If you want to obtain the numbers in the same screen you should do the following1
1 - access the report
2 - further selection button - select Action type and move it to the Selection fields (you will get it on the screen)
3 - select action Hiring and action Leaving (so that the report will only count these elements)
4 - Period - current month
5 - run the report
6 - you will now have to see the number of employees (unfortunately you cannot do Sum here as you could do in a Querry that you would build as you would add the Count field so we need to do a little trick)
7 - Change layout icon - View tab- select Preferred view instead of SAP List viewer ->Microsoft Excel
8 - Select a template - press save
9 - You will see now the report in the Excel format. You can do sums if you want, add formulas, or you simply delete the first line and just look at the latest line filled in (total number of EE who left or were hired during the month)
If you do your own Querry - you can skip the Excel part and make a screen variant with the Sums.
At least now you have 2 options that you can choose from
Regards,
Adriana

How to extract the number of employees (Head count) in a particulr month

Hi Experts,
We are trying to have a customized report on Having the employee headcount for a particular month with number of employees joined on the month and number of employees left the organisation.What is the way to get it.
Please advice.
V Sai.

Hi Vicky Sai,
The standard report is S_PH9_46000223 - EEs Entered and Left
If you want to obtain the numbers in the same screen you should do the following1
1 - access the report
2 - further selection button - select Action type and move it to the Selection fields (you will get it on the screen)
3 - select action Hiring and action Leaving (so that the report will only count these elements)
4 - Period - current month
5 - run the report
6 - you will now have to see the number of employees (unfortunately you cannot do Sum here as you could do in a Querry that you would build as you would add the Count field so we need to do a little trick)
7 - Change layout icon - View tab- select Preferred view instead of SAP List viewer ->Microsoft Excel
8 - Select a template - press save
9 - You will see now the report in the Excel format. You can do sums if you want, add formulas, or you simply delete the first line and just look at the latest line filled in (total number of EE who left or were hired during the month)
If you do your own Querry - you can skip the Excel part and make a screen variant with the Sums.
At least now you have 2 options that you can choose from
Regards,
Adriana

[Win VC++ 6.0 ]How to get the number of files count in a folder using VC++ 6.0?

Hi all,
Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0?
Thanks in Advance.
Regards
myriaz

I'm a little confused by the question, but it sounds like you're asking how to count the number of files with a particular extension in a given directory? That's not really an AI SDK question, but it's a fairly easy one to find if you google it. If you're trying to use Illustrator to do it, AI doesn't have a general purpose file API. It has a few functions to do some things that Illustrator needs, but I don't think enumerating directories is one of them.

How can I see the quantity of battery cycles on Satellite U200-181?

I have Satellite U200-181, and I use it hard, every. I want to be ready replace my battery, when it will have 400 cycles.
How can I see the quantity of battery cycles on my laptop?

You must not see this. You will see that capacity of the battery drops down and will be empty after short time. Nobody say that you will be able to use battery 400 cycles only. Maybe you will be lucky and the battery will have longer life time.
My Tecra M1 is about 4 years old and still working with original battery.
Your question is pretty unusual and I am really interested about further comments.

How to limit the number of boxes to tick in LC

I would like to know the "javascript" in Lice Cycle to limit the number of boxes ticked
for example i have 20 boxes and i would like that the client can only tick 5 boxes
thank you

Thank you Steeve
But my problem is that i don't know which boxes the client will want to tick so all boxes have to be available at the beginning.
When the client will have ticked 5 boxes in this case and only in this case, all others boxes must become unavailable so it is very difficult to set up
if you have any idea
thanks anyway
Date: Fri, 15 May 2009 09:44:33 -0600
From: [email protected]
To: [email protected]
Subject: How to limit the number of boxes to tick in LC
This is a form validation issue. For example, you may have a text field and the value entered into that field determines which checkboxes must be completed to satisfy a validation or business rule. The attached sample requests the value "foobar" to be entered into a text field. If you enter "foobar" and exit the field, 2 of 3 checkboxes have the access property changed to "protected", meaning a user cannot no longer select those checkboxes.
// form1.page1.subform1.input::exit - (JavaScript, client)
if (this.rawValue == "foobar") {
form1.page1.subform1.cb2.access = "protected";
form1.page1.subform1.cb3.access = "protected";
Steve
>

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find the number of occurance of a string in text field of Infopath form?

Hi All,
In Infopath text field, How to find the number of occurrence of a particular string in that field?
Thanks in advance!

You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
Example:
String: "1"
Box A - "123451234512345"
Box B - "23451234512345"
Box C - "2345234512345"
Box D - "234523452345"
etc.
We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number simultaneous call at a given moment on UCCX ?

Hello,
I would to know how to find the number simultaneous call at a given moment on UCCX ?
it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
Aubert

Hi Gergely,
I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

How to optimize the number of battery cycle count?

Similar Messages

Maybe you are looking for