How to optimize your PC for the 0404 USB and 0202 USB

This is a guide on optimizing your system for the 0404 USB and 0202 USB.
Make sure the 0404 USB is using a USB HOST that is on an IRQ alone. This means no other device in the PC can be sharing its IRQ.
If you are running a hyper-threaded CPU, by turning hyperthreading off from the bios. You can set the latency at 20ms or lower and you will usually not have any latency issues.
Change Processor Scheduling to 'Background Services' - Navigate to the Advanced page of the System applet. Click on the Performance Settings button, select its Advanced tab and click on 'Background Services' for Processor Scheduling.
Switch Off Power Schemes - In the Power Options applet, choose the 'Always On' power scheme. Change the settings for monitor and hard disk turn off and System standby to 'Never', so that your PC doesn't unexpectedly conk out during song playback
Disable System Sounds - Select the 'No Sounds' scheme on the Sounds tab of the Sounds and Audio Devices applet.
Make sure legacy USB support is disabled in your BIOS.

Hi everybody.
This message to share my experience of the 0404 USB under Windows 7.
I previously operated this sound adapter under Windows XP and it was working fine with my pipe organ simulator (Hauptwerk).
When I switched to W7 on a Dell Vostro (professionnal series), sound was muting after exactly one minute . The same with a video on Yutube.....
I did all the adjustments suggested here and there on the web (sampling rate, drivers) , I tried to operate at moonlight, I shot a chicken, etc ...
After many manipulations, I noticed that, if I was doing "something", for instance moving the sound level up and down, the sound was going on ....
The solution was in part at the beginning of the topic "how to optimize your PC for th 0404, etc ....".
The keyword is "interrruption".
As a matter of fact, the Dell laptop is strongly closed. The BIOS allows no adjustment of nothing.... No way to control interruptions allocation.
BUT!!! I noticed that the two USB 2.0 ports are located very far away from each other. I supposed there would be TWO controlling chips. And I tried the second one. AND IT WORKED!
So the E-MU guy is right, the device must get a free interruption line to operate ....!

Similar Messages

  • If my ipad was stolen, how to register my ipad for the stolen goods, and lock the hardware requirements?

    If my ipad was stolen, how to register my ipad for the stolen goods, and lock the hardware requirements?

    It's really disappointing as a newly converted Apple customer who has already had his iPad stolen, that Apple just sits back and let's this happen. 
    I've viewed a number of posts regarding stolen iPads.  Yes, I did have the "find my iPad" enabled.  That's how I knew when the iPad was gone for good.  It's a useless function in the case of theft because the thieves know how to hack into your iPad.  It disappeared from my list of devices in the "find my iPad" utility that very same day. 
    Apple loves the fact that their devices get stolen all the time!  That way they sell more of them.  Theft could easily be significantly reduced if Apple chose to give users a means to report stolen devices on the Apple site.  They choose not to do this.  If the black market for Apple devices was limited to hackers who know they have a stolen device, the items wouldn't be such a hot commodity!  Apple knows this... I guess they want to get their devices into as many households as they can.... Legally or not. 
    So for all you hard working folks out there, find a way to make sure your Apple products are secure because if they get stolen, you're out of luck.  Apple refuses to help when they could easily do so. 

  • How to take a report for the assigned transaction and activity in a role

    Hi Colleagues,
    I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
    Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
    Please suggest how to take this information.
    BR,
    Jai

    Hi Jaikumar from the post :
    I think you have reached the state of finding the USER to ROLE relationship
    Take the output to an excel,
    COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
    insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
    It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
    This is one of the ways to do , there are many other ways to do it.

  • How do you sign up for the MORE program and get the 50MG for free?

    I was told that if you signed up for the MORE - Cloud program you will get 50mg for Free?  I didn't receive that.  Anyone know how that works?

        Hello skyles!
    I have great news! If you have the More Everything plan, you get 25GBs of cloud storage. That's a bunch more room than 50MBs! Here's a link to check it out: http://vz.to/1eTSQHd
    Thanks,
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • I forgot the answers for the security questions and when I try to change them (My Apple ID - Manage your account - Password and Security) I'm asked to answer the exact questions I'm Trying to change because I don't remember the answers. How can I do it?

    I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?

    Can't you try the email option instead?

  • Anyone still up? I just purchased from the itunes store for the first time, and don't know how to get them downloaded to my ipod.

    Sigh.....really late and I want to go to sleep, but I just purchased some Itunes online for the first time, and I don't know how to download them to my ipod. I've never done it before, and it shouldn't be rocket science, but I can't find anything that tells me where to go to download my songs. It said something about check purchases, but I can't even find that screen.  I connected my ipod to the computer, and now it says CONNECTED...EJECT BEFORE DISCONNECTING. My BF set up the acct when he bought my ipod as a gift, and as I bought these songs for a special weekend I have planned I can't ask him how to do it.  HELP!  For some reason the password I always use is not recognized for my account... and since I can't get anyone from itunes without a proper log-in I'm at the mercy of all of you more versed in tech and itunes than I.  Is anyone still up that can help me out?

    It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
    You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

  • How to get Open Balance for the year and Total Ending Balance?

    For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
    Is there any function module available? or should I read from some tables? Please advice.

    Hello Paul,
    You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
    BAPI_GL_GETGLACCBALANCE      
    BAPI_GL_GETGLACCCURRENTBALANCE
    BAPI_GL_ACC_GETBALANCE      
    BAPI_GL_ACC_GETCURRENTBALANCE
    BAPI_GL_ACC_GETPERIODBALANCES
    BAPI_COND_VAL_DECRE_BALANCES
    You might have to put in some of your own logic after the BAPI call to get what you want.
    Hope this helps,
    Cheers,
    Sougata.
    p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
    Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

  • I have forgotten my password for the orange webmail and I do not how to reset

    i have forgotten my password for the orange webmail  and I  do not how to reset

    Try forgotten your password? on login form http://email.orange.co.uk/ .

  • How can i use AME for the new OAF page.

    Dear all,
    I have developed a new OAF page and registered under Employee Self Service.
    How can i use AME for the approval process.
    Appreciate your ideas?
    zamora

    I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
    Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
    Let's look at the workflow and putting an OAF Page as notification.
    As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
    In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
    If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
    Hope this gives some idea.

  • How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

    How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • How to deal with BRS for the below scenario?

    Hi,
    I would like to know the solution for the below scenario for BRS:
    I have a customer who was maintaining their accounts with Tally software for their previous Financial Year. This year they have shifted to SAP B1 2005B. They have issued few cheques for their vendors in the month of march 2008 which has been realised in the month of April 2008. As per Tally, the closing balance of their bank is 8 Lakh but as per the bank statement, their closing balance is 23 Lakhs. In SAP, the opening Balance for the bank is considered as 23 Lakhs. Now there are 15 Lakh worth cheques which were not realised for the month of March 2008.
    Example:
    abc a/c - 3Lakh
    def a/c - 5lakh
    xyz a/c - 7 lakh
    How do i reconcile for this scenario and what procedures do i follow in SAP?
    Thanks and Regards,
    Kaushal

    Hi Kamlesh,
    Thanks for your response.
    Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
    31/03/08 - 2300000.00
    30/04/08 - 3100000.00
    Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
    When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
    Last Balance: INR -7,000,000.00000 (Grayed out by the system)
    Ending Balance: INR -3,100,000.00000 (Entered by me)
    End Date: 30/04/08 (Entered by me)
    "Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
    Cleared Book Balance: INR -7,000,000.00000
    Statement Ending Balance: INR -3,100,000.00000
    Difference: INR 3,800,000.00000
    As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
    Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
    That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
    Thanks in Advance....
    Regards,
    Kaushal

  • I recently changed my apple id and both my iphone 3Gs and Ipad 2 when synced went straight back to my old id name for my app store how do I change it to the new one and keep it that way?

    I recently changed my apple id and both my iphone 3Gs and Ipad 2 when synced went straight back to my old id name for my app store how do I change it to the new one and keep it that way?

    Try going into your account details on iTunes, change your info there, then sync your devices.

  • HT201210 I accidentally restored my iPhone 5 for the first time and now I have lost all my photos and contacts. How do i get them back?

    So I plugged in my iPhone 5 to my computer for the first time and I accedentally pressed restore. My wife has a iPhone 4s and has plugged in her phone to the computer many times to sync. So when i restored i got all her photos and lost mine which were very very importent. So how do I get my photos back?

    Unless your photos were backed up somewhere, they're gone.  They were wiped off your phone when you restored it from your wife's data.

  • How to create a validation for the project coding mask

    Hi,
    Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
    project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
    mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
    The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
    How can we go about this?

    Hi Jacquiline Bersamin,
    You can use validation with the combination of the level and the coding mask.
    In the validation:
    Pre requisite: WBS level = 1
    Validation: Prps-posid = prps-posid :1-12:
    Message : Error
    If required you can give the parameters for your detail error message.
    Please let me know if this does not work.
    Thanks
    Regards
    Srinivasan Desingh

Maybe you are looking for