How to order IPS Svc for ASA5515-K8 and L-ASA5515-IPS-SSP=?

Hello!
I have got ASA5515-K8 and IPS license L-ASA5515-IPS-SSP= ordered separately.
What smartnet should I order to enable IPS singnature updates?
I tried to order SU1 smartnet for ASA5515-K8, but Product ID ASA5515-K8 is not mapped to SU1 service.
Thank you!

Hello Andy,
Here is the information you are looking for:
Cisco Services for IPS
Cisco Services for IPS is an integral part of the Cisco ASA 5500-X Series IPS Solution and enables operators to
receive time-critical signature file updates and alerts. Part of the Cisco Technical Support Services portfolio, Cisco
Services for IPS allows your Cisco ASA 5500-X Series IPS Solution to stay current on the latest threats so that
malicious or damaging traffic is accurately identified, classified, and stopped. Cisco Services for IPS features
include:
● Signature file updates and alerts
● Registered access to Cisco.com for online tools and technical assistance
● Access to the Cisco Technical Assistance Center
● Cisco IPS software updates
● Advance replacement of failed hardware
For more information about Cisco Services for IPS, visit
http://www.cisco.com/en/US/products/ps6076/serv_group_home.html.

Similar Messages

PCI-6281 How to use80 mHZ timebase for A/d and D/A sample clocks

Does anyone know how to use the 80 mHZ internal clock as the timebase for my A/D and D/A sample clocks rather than the default 20 mHZ timebase?
I am using straight NI-DAQmx version 8.3 with C code. No Lab View, no Measurement Studio.
I have an application which uses the D/A to generate a sequence that is collected by the A/D. The D/A is clocked out at an integral multiple of the A/D clock. In order to maintain this integral relationship I can only use a limited set of Sample Clock Timebase Divisor pairs (as returned by DAQmxGetSampClkTimebaseDiv). This means that am further from my desired base frequency than normal. For example, using the degault 20 mHZ timebase, if I want a 2000 hz center fequency, the closest I can get is 2003.205 hz.
I cannot find anyway to use the 80 mHZ internal clock as the timebase for my A/D and D/A sample clocks. If I could, it would be possible to get closer to my desired center frequency.

Post is responded to in the multifunction DAQ forumn.
PCI-6281 How to use80 mHZ timebase for A/d and D/A sample clocks
Have a good one.
Michael D
Applications Engineering
National Instruments

HT1933 I make a purhase on March 6 at 11:33 Order number MHOXX3TK9J for $1.99 and my credit card was charged $20.00 can you please help me find out why this happened

I made a purchase on itunes on March 6 at 11:33 order umber MHOXX3TK9J for 1.99 and my credit card was charged $20.00 please help me find out why this happened.

Contact iTunes support at the link below.
https://ssl.apple.com/emea/support/itunes/contact.html

Hello! My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB: for my wife and myself. But I have a question to you. Will it work in Russia? How much will it cost for me? And how much will delivery cost to Russia? Thank you very much.

Dear Sir or Madame,
My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB online, from your official website Apple: for my wife and myself. But I've a question to you. Will it (iPhone 5, 64 GB) work in Russia? How much will they cost for me? And how much will the delivery from America to Russia cost?
Yours sincerely,
Vadim Fedotov.

iPhone 5 is not available unlocked in US and
Apple Store online does not ship outside the Country it operates
You are best served waiting for the iPhone 5 to be announced in Russia
through your Apple Approved carriers

How do I disable transparency for the menubar and addressbar in firefox?

How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
It is difficult to read.
Edit:
Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
I know what Aero is and how to turn it off.
The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.

If you are up to tweaking some CSS code in a style see
"Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars.

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

HT201304 How do I prevent paying for an app and what is an in app restriction

How do I prevent paying for an app and what is an in app restriction

You can't prevent paying for an app if you buy one. You can, however, turn off the ability to install apps in the Restrictions settings (Settings/General) which blocks the App Store app on the iPhone. You can also block making purchases of extra features or capabilities from within an app, which is referred to as an "in-app purchase", in the same Restrictions.
Regard.

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

If your forgot the administrative PW for the computer reset the PW
OS X: Changing or resetting an account password
OS X Lion>: How to Easily Reset the Administrator Password

How to Upload the Materials for one Plant and then copy the same to all oth

Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>

Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K

Can I order spare parts for my iPhone and have them replaced in an Apple store near me?

Can I order spare parts for my iPhone and have them replaced in an Apple store near me?

pretty sure apple don't sell spare parts at all
but try google there are some who does sell parts if they are official and if it matters if they are not I have no idea

How to create customer exit for characteristic variables and for text vars.

hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sree

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

How to import missing content for my music and video files from Itune online

how to import missing content for my music and video files from I tune online.

Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1727 How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

How to find the Open sale orders till date for given plant and material ?

Hi experts,
                 I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
Ashwin

Hi Ashwin,
    You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
   VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
   If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to order IPS Svc for ASA5515-K8 and L-ASA5515-IPS-SSP=?

Similar Messages

Maybe you are looking for