How To Order New AC Power Supply for Satellite A350-20Q?

Hi,
I bought my Satelite A350-20Q 2 1/2 yeras ago, and when I turned on my laptop the screen was dim, the power supply was already plugged in but it did not make any change. How can order a replacement?
Thanks

According notebook specification AC power supply for your notebook has part number PA3290E-3AC3. I dont know where do you live but Googling around and using this part number as search term you will, I hope, find enough online stores where you can order new AC adapter.
You can also contact nearest Toshiba service provider and ask them to order it for you.

Similar Messages

  • New Antec power supply for p7-1003w doesn't fit?!

    I got a new power supply for my p7-1003w tower only to discover it would not fit. It was getting caught somehow so I looked and noticed it was not the supply itself but the black plastic bezel piece around the AC connection hole.
    Has anyone else faced this? The original power supply doesn't have a bezel, but all the Antec supplys I see do. 
    If you've had this problem of the bezel beign too big what did you do bend your back plate? lol or is their a certian brand of supplys that don't have the big bezel around the connector hole.
    Thanks!
    Thomas

    Hi,
    Can you better describe the issue? See the below image:
    I saw a posting like yours here on the forum some time ago but I can't say if an Antec PSU was being used.  I typically recommend Corsair PSUs under 650 watts for the HP mid-tower chassis.
    Which model Antec did you buy?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • New internal power supply and iMac still not powering up

    I recently purchased a new internal power supply for my Intel iMac and after being installed by a local Mac repair shop it still will not power up.
    Are there any other issues that could cause an iMac not to start up? The logic board?

    I did try to reset the PRAM and SMC before the iMac went completely kaput. But now, even with a new power supply, it won't even turn on. Maybe my replacement power supply is damaged somehow. But the repair shop said my original power supply looked like it was in good condition. Maybe they can test the original one somehow?
    So my question is still: If the power supply is good, and if the hard drive is good, but the computer will still not turn on, what is left? Could the logic board be the only remaining culprit here? Are there other factors that could cause my iMac to not start up?

  • Where can I get a new power supply for my HP Pavillian 761C ?

    I can't believe how difficult it is to find HP parts.  The HP website is worthless for finding ant parts!   where do I go to find a new power supply for my HP Pavillian 761C ?

    Hi,
    Your PC has a 200 watt power suppy. Try this link.  The posted price is $9.94.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Power supply for 3400

    Hi, I lost the power supply for my I-Triggue 3400, so I need to know how is the shema of wiring to make a new one. Thanks a lot.

    For the DMP-4400G:
    Part# is DMP-4400-ACC-KIT= 
             (Accessory Kit)
    For the DMP-4305G:
    Part# is DMS-DMP-4300G-KIT
    NOTE: The ACCESSORY KIT does come with the Power supply
    for the DMP.  However, the power cable is a separate
    configuration item that needs to be ordered separately.
    I hope this helps!
    T.

  • Is light faulty on new 60w power adapter for my Macbook?

    Had to order a new 60w power adapter for my Macbook a couple of weeks ago -- bought it from the Apple Store (the new design adapter). When it's plugged in it turns green, then immediately turns red to recharge -- all normal. Once fully recharged the adapter light turns/stays green. But after awhile the adapter light goes out altogether. The icon shows it's charging, but the red (and green) light is off. If I remove the adapter and plug it back in the lights will come on again.
    Is this normal?
    Thanks.

    I think I'm experiencing the same problem. My computer charges but the light goes back and forth from being on or off, orange or green. I'm a little disappointed that the light could be burned out, but I guess a little light like that can't last forever. Oh well.
    Is it worth pursuing a replacement from Apple since I still have AppleCare? Just wondered.
    Anyway, this is really helpful information. Thanks for sharing.

  • Power Supply for Airport Extreme

    Hi
    Does anyone know where I can get a new power supply for my airport extreme in the UK? Mine has died, and I don't really want to buy a whole new base station just because of the external supply. (I know the actual unit is working through plugging in a power supply from my other base station)
    I tried Apple, who weren't really any help.
    Thanks in advance!
    Tom.

    Tom welcome to the discussions.
    I would probably call the Apple number.
    1-800-MY APPLE
    I am sure that they can point you in the right direction.
    I am a little shocked that one of the Apple Retail stores can't offer you a Power Supply.
    If all else fails, it sounds like you have tried an alternitve, if it works use it, until you can get a replacment.
    Don

  • Replacement power supply for Airport N base station?

    I'm in need of a replacement power supply for an Airport Extreme N base station.
    Is this something I can pick up at a friendly neighborhood Radio Shack, or do I need to order the OEM part from Apple?
    I don't need the automatic international voltage switching, just something that can power this puppy with US AC. Thanks.

    Tom welcome to the discussions.
    I would probably call the Apple number.
    1-800-MY APPLE
    I am sure that they can point you in the right direction.
    I am a little shocked that one of the Apple Retail stores can't offer you a Power Supply.
    If all else fails, it sounds like you have tried an alternitve, if it works use it, until you can get a replacment.
    Don

  • WANTED: Power supply for DTT2500

    Someone stole the power supply for my CSW DTT2500 speakers. They are in nearly new condition except for this. I've looked everywhere for a replacement with no luck and I don't think creative will be much help since this is an older product. If anyone has a spare or maybe your speakers died and you have the power supply lying around, message me at [email protected] and hopefully we can work something out!
    Best Regards!
    L

    Email sent.

  • Need step by step directions to install a replacement Power Supply for a HP Color LaserJet 1215

    I have a HP Color LaserJet 1215 printer that is only a couple of years old.  Had a power problem at home that burnt out the power supplies of two HP Towers, a DSL Modem, and (I think) the power supply of my printer.  I have located a replacement power supply but would sure appreciate any one that would know how to replace.  I need a step by step guide aas to how to perform such a task.
    It would also help to have a diagram of the printer showing precisely how to get to the power supply.
    Thanks in advance for any and all help.  I have spent days looking for this information and can't seem to find any.

    How do I start using the reciept scanner

  • Power supply for Nexus gear

    I need to migrate devices off of 110v and move them over to 208v. I was wondering if there would be any risk moving one side to 208v while the other is still connected to 110v on the Nexus 7 and 5K switches, or would it be best to take down the device all together then make the change?

    For the DMP-4400G:
    Part# is DMP-4400-ACC-KIT= 
             (Accessory Kit)
    For the DMP-4305G:
    Part# is DMS-DMP-4300G-KIT
    NOTE: The ACCESSORY KIT does come with the Power supply
    for the DMP.  However, the power cable is a separate
    configuration item that needs to be ordered separately.
    I hope this helps!
    T.

  • Power supply for MSI 645 Ultra mother board

    I need to replace the power supply for a MSI 645 Ultra mother board. I've available a switching power supply Allied model DR-B500E, that doesn't have the -5V output (infact its 20 pin ATX power supply connector has no wire in pin 18).
    Can I use this power supply with the MSI 645 Ultra?
    Thanks in advance for any help.

    Hi, here I am. Sorry for delay but I had some problems with the PC (as NTLDR missing).
    However now is ok and I can confirm that it runs ok also with power supply without -5V output.
    Thanks a lot for the support and best wishes for Christmas and new year.

  • Which power supply for k8n neo2 Platinum

    I need to buy a new power supply for my computer. With the ATX12V v2.2 standard and ATX12V 2.01 and the "no -5v on new psu's" issue I'm at a loss as to what to look for. I have looked and cannot find what "standard" (is that even the correct term?) the k8n neo2 supports.
    My main requirement is that the psu be 550-650 watts and have modular cables. I know someday I will have to upgrade my system to PCI-E and modern components, so I would like a PSU that would work now and in the future.
    Could someone point me in the right direction?
    Many thanks
    system spec's
    Motherboard- MSI K8N Neo2 Platinum
    CPU- AMD Athlon 64 X2 Dual core 4800 939 socket
    Memory-CORSAIR 2X1G Twinx2048
    Video- ATI HIS 4670 1GB AGP
    HD- Seagate 100 gb 7200 rpm
    Drives CD-DVD and CD-RW
    PSU- Ultra X Connect 500W ATX
    Sound- Creative SB Audigy2 Gamer
    OS- WinXP Home SP3 32 bit

     Why do you need 550-650W or is that just because of future needs? I would suggest one of the Corsair +12V single rail modular PSU's if you insist on the modular design. Check newegg for what they have for modular in the Corsair lineup. I'm sure you're aware that their price is considerably higher than the non-modular. K8 MB's that needed -5V are the early ones that had Creative Sound Blaster onboard audio.
     HX650
        *  Was: $139.99
        * $109.99
        * After $10.00 Rebate
        * $10.18 Shipping
     That's what it is now but if you don't need it in a big hurry you can probably wait a while and get for the same price but with free shipping.
     Edit: Gee, Ultra with blown caps, I just happen to have a xPRO 800W that blew some caps, repaired it and started going bad again and then got my TX650 to replace it. Got it for $70 after rebate (which I haven't received yet) by waiting for the right price, rebate and free shipping. VX550 would have been good enough but at the time I got the TX650 at a lower price.

  • Power Supply for G4 Dual 1.42 MDD

    I am needing a new power supply for my Dual 1.42 G4 MDD and need to know what models I can replace mine with.
    Thanks

    Hello! Try looking HERE. Tom

  • Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?

    Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?
    I don't see anywhere on Dell's website to purchase this.

    So far there is no replacement/upgrade PSU for Dell Optiplex 9020 MT from Dell.
    Will a dedicated power supply work for playing games? i bought this system as used (excellent condition) just for Gaming Purpose (GTA V), now i am stuck with the PSU issue. I can alter the case to fit the big size GPUs, but the issue is of PSU.
    Will ePower EP-450CD can help me in any way. 
    My main reason for changing PSU is to play my favorite game.
    Link to ePower ()
    or

Maybe you are looking for

  • How to maintain Authorized buyer for a customer in Sales Order.

    Dear all, We have a corporate customer, which has 10 authorized buyers. We have created a Customer number for this company. But at time of sales order creation, we need enter the authorized buyer name in sales order for the record purpose. we are not

  • Music in the disorder

    Hello, many albums have their music in the mess on my ipad since ios7 while they are in order on my other devices even after deactivate and reactivate itunes match the proplem is still present thank you

  • Importing Erwin models to SQL Developer Data Modeler (SDDM)

    Has anyone successfully done this? The real problem I am having is figuring out how to export the model from Erwin. SDDM expects an XML file from Erwin, but we have not figured out where in Erwin there is a XML export option. I am assuming someone in

  • Using Archiver to replicate tables

    Hi, I'm trying to replicate a singular table between two instances content server using archiver. CREATE TABLE TEST ID NVARCHAR2(20) NOT NULL, SCHCREATETIMESTAMP TIMESTAMP(6), SCHMODIFYTIMESTAMP TIMESTAMP(6), SCHSOURCEID NVARCHAR2(50) When I insert o

  • Problem with action script from Schewe and Frasier book.

    I am working on a Photoshop CS3 action script to open raw files, do a couple of modifications in Camera Raw, exit camera raw and save the file as a jpeg. I think this should work, because I am working on an example out of "Camera raw with Adobe Photo