How to order Option 3 with Fibre?

Sorry if this is slightly off topic but I've endured a very slow internet connection for years with Plusnet so I've been planning to change to BT for some time. I've carried out a line check on the BT website and also the BT Wholesale website and it states that I can take advantage of the fibre optic network and expect a speed of 9.1 MB. This might not sound that fast but I would be over the moon with 9.1 as my current connection is almost as slow as dial up!
My question though is that when the BT site advises me to choose a package there is no option for Option 3 with fibre just the Total Broadband and Faster Total Broadband. Do I have to call a certain number to order the fibre service? Any help would be appreciated as to who is best to call or email. Also, how long is it likely to take between ordering Opt 3 fibre and getting it installed?

Call 150, they should be able to order it. You might also find that you get higher than the estimated speed
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Hi how to order iPhone 5 with delivery to Russia

hi how to order iPhone 5 with delivery to Russia???

The apple online stores don't ship outside of their own countries, so you will either need to use one of the premium resellers that is within Russia or find another online store that will ship overseas.

How to use optional prompts with stored procedure universe?

Hi Experts,
Iu2019m working on stored procedure universe in BO XI 3.0 SP2 FP2.5 with oracle at back end. My requirement is that I have to pass 5 optional prompts in the report and we have to pass these prompts through open document link. Please tell if this can be worked out on stored procedure universe?
Thanks in advance.

Hi,
Try with OpenDoc syntax as follows.
http://<servername>:<port>/OpenDocument/opendoc/<plat
formSpecific>?iDocID=****&sIDType=CUID&sType=wid/rpt&lsM/lsS/lsRPROMPTNAME=[V1],[V2]&sDocName=reportname&sRefresh=Y/N
where
server name: cms server name
port: portno
<platformspecific>=: for java -> openDocument.jsp
for .net -> opendocument.aspx
idocid,sDocName & cuid -> we can get report properties ( goto info view -> select report -> right click -> properties i.e. doc id, cuid and report name)
sType -> type of report i.e webi or deski ...
lsS -> to pass single prompt value
lsM -> to pass multiplle values to prompt
lsR -> range of values ....
Note: Here prompt name should be same as the one which we used in the report. Use + if there is blank space.
Cheers,
Suresh Aluri.

How does order by work with rownum

Oracle Ver: 11g
Hello All,
I have 2 cases here, one with outer order by and one without outer order by.
I do not see any difference in the outputs for now.
Case 1:
/* Formatted on 4/30/2013 2:12:28 PM (QP5 v5.240.12305.39446) */
SELECT *
FROM ( SELECT ROWNUM rn, id
            FROM (SELECT 9 AS id FROM DUAL
                  UNION ALL
                  SELECT 1 FROM DUAL
                  UNION ALL
                  SELECT 14 FROM DUAL
                  UNION ALL
                  SELECT 7 FROM DUAL
                  UNION ALL
                  SELECT 5 FROM DUAL
                  UNION ALL
                  SELECT 6 FROM DUAL
                  UNION ALL
                  SELECT 13 FROM DUAL
                  UNION ALL
                  SELECT 8 FROM DUAL
                  UNION ALL
                  SELECT 2 FROM DUAL
                  UNION ALL
                  SELECT 4 FROM DUAL
                  UNION ALL
                  SELECT 19 FROM DUAL
                  UNION ALL
                  SELECT 3 FROM DUAL)
        ORDER BY id)
WHERE rn BETWEEN 1 AND 6;
Case 2:
I have added order by for outer clause in this case
But I would like to make sure if I really need to have the order by for outer query here.
/* Formatted on 4/30/2013 2:12:28 PM (QP5 v5.240.12305.39446) */
SELECT *
FROM ( SELECT ROWNUM rn, id
            FROM (SELECT 9 AS id FROM DUAL
                  UNION ALL
                  SELECT 1 FROM DUAL
                  UNION ALL
                  SELECT 14 FROM DUAL
                  UNION ALL
                  SELECT 7 FROM DUAL
                  UNION ALL
                  SELECT 5 FROM DUAL
                  UNION ALL
                  SELECT 6 FROM DUAL
                  UNION ALL
                  SELECT 13 FROM DUAL
                  UNION ALL
                  SELECT 8 FROM DUAL
                  UNION ALL
                  SELECT 2 FROM DUAL
                  UNION ALL
                  SELECT 4 FROM DUAL
                  UNION ALL
                  SELECT 19 FROM DUAL
                  UNION ALL
                  SELECT 3 FROM DUAL)
        ORDER BY id)
WHERE rn BETWEEN 1 AND 6;
ORDER BY id;Thanks
Shank.

Hi, Shank,
SamFisher wrote:
... I do not see any difference in the outputs for now. You may not, but you can't be sure that you will never see a difference. There may be a difference if you change versions, or if you add more data, or for no apparant reason.
If there's an ORDER BY clause in the main query (as in query 2) then the output is guaranteed to be in that order.
If there is no ORDER BY clause in the main query (as in query 1), then there's no guarantee that the rows will be in any particular order. If Oracle finds it convenient to display the rows in order by one of the columns (for example, rn) then it will do so. You can not count on it always doing the same thing unless there's an ORDER BY clause.
You should check out the analytic ROW_NUMBER fucntion. It's much more useful, and easier to understand, than ROWNUM. (In this particular example, it might not be any simpler, though.)

Faster Broadband option 3 with fibre

I upgraded to faster broadband package at the end of August with a predicted speed of 8.9 meg download , but when it was activated my speed was still below 2 meg . After numerous phonecalls , complaints and two no show engineer visits , when the engineer did turn up he said that 1.8 meg down was all that i could achieve . I then rang Bt sales who told me that I should not have been offered this packaged and that was that .I checked a month later and now i was being offered faster broadband with a 13.9 meg download speed and I upgraded again but my speed is still less than 2 meg . Can anyone provide me with help pn this matter ? Richard
Solved!
Go to Solution.

Hi I suggest you contact the forum mods at this link http://bt.custhelp.com/app/contact_email/c/4951 they normally reply within 72 hours by email or phone personally
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

BT Opt 3 with Fibre / Upload from 2 to 10megs

Hi
I had this installed about 2 weeks ago now and was estimated 14.8 and 5.6 respectively... Eng came and installed and got the full 38717 profile but was locked to the 2000 upload profile.
Connection has been rock solid with no disconnections.
I had a request for the 10000 profile to be applied which they did over night... which was very fast I must admit.
Anyway the morning came and the DSL light was out on the OR modem, so I rebooted it. Tested the connection and got the full 37~ down and 8~ up on a speed test... The BT Speedometer confirmed the profiles as 38717 10000... But the problem was that the line constantly dropped like ever 30 seconds just enough for me to run a test it seemed.
Anyway it remained off line for the rest of the day as it gives up trying to sync after maybe 10 times?
I made a phone call to support and they did a line check after I explained my issue. About 20 mins after getting off the phone from them, they line stabilised and didn't disconnect at all.
What I noticed is that when I do a speed check, is that the upload speed is at just below 2megs again... yet the profile states 10000k
My question is will this increase over time to the max stable possible? or am I stuck on 2000k even though the IP Profile states 10000... and also is there anything I can ask when I contact them?
I read that the line gets set to fast path from the first day if they have no line issues? is it possible that the line couldn't handle fast path with the higher upload speed?
Thanks
Nick

NEagle wrote:
Hi
I had this installed about 2 weeks ago now and was estimated 14.8 and 5.6 respectively... Eng came and installed and got the full 38717 profile but was locked to the 2000 upload profile.
Connection has been rock solid with no disconnections.
I had a request for the 10000 profile to be applied which they did over night... which was very fast I must admit.
Anyway the morning came and the DSL light was out on the OR modem, so I rebooted it. Tested the connection and got the full 37~ down and 8~ up on a speed test... The BT Speedometer confirmed the profiles as 38717 10000... But the problem was that the line constantly dropped like ever 30 seconds just enough for me to run a test it seemed.
Anyway it remained off line for the rest of the day as it gives up trying to sync after maybe 10 times?
I made a phone call to support and they did a line check after I explained my issue. About 20 mins after getting off the phone from them, they line stabilised and didn't disconnect at all.
What I noticed is that when I do a speed check, is that the upload speed is at just below 2megs again... yet the profile states 10000k
My question is will this increase over time to the max stable possible? or am I stuck on 2000k even though the IP Profile states 10000... and also is there anything I can ask when I contact them?
I read that the line gets set to fast path from the first day if they have no line issues? is it possible that the line couldn't handle fast path with the higher upload speed?
Thanks
Nick
I was in same position, after my profile was rose to 10 it took a few days for changes to occur. It's been about a week now and i'm still rising, 5.5 atm. Its a slow process
Option 3 with Fibre. (Quoted 10mbps/2mbps)
28th May 2011 -- 32.5mbps / 8.5mbps
Website checker is just so accurate!

Option click with mouse?

This is my last question for now. I'm playing an online puzzle challenge at Gold Rush. And for the puzzle for Mac users, you need to option click to alternate the puzzle pieces. How do you option click with the Mighty Mouse?

Hi, Kirsten.
Same as with any other mouse: hold the Option key, then click with mouse button one, i.e. the same button you would use to perform a single click, usually the left mouse button if you've set up your mouse as right-handed.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to remove the option GR with reference to PO from MIGO?

Hi All,
We are doing the Goods receipt with reference to Inbound Delivery (in T code MIGO).
And never use the option Goods receipt with reference to Purchase Order.
So, we want to remove this option Goods receipt with reference to Purchase Order.
Is it possible and how?

Dear,
Goto - SPRO - MATERIAL MANAGEMENT - INVENTORY MANAGEMENT AND PHYSICAL INVENTORY - SETTINGS FOR ENJOY TRANSACTIONS - SETTINGS FOR GOODS MOVEMENTS - SETTINGS FOR TRANSACTIONS AND REFERENCE DOCUMENTS.
Once select this option, from the next window open - select the appropriate action usually - MIGO-GR.
Then select Transaction / Event.
Then select again GOODS RECEIPT and double click on REFERENCE DOCUMENTS.
DE-ACTIVATE purchase order check box and save.
No need to delete purchase order option, just de-activate it.
Try this.
Regards,
Syed Hussain.
Edited by: Syed Hussain on Aug 29, 2009 10:37 AM

How do I access specified order options programmatically?

Using the RAS SDK (or any other .NET API), is it possible to access the specified order options of a group? I am talking about the named groups with specified conditions.
I have found nothing when searching through the documentation, but maybe I am overlooking something. I know this used to be possible with the crpe32.dll - is it no longer possible?
Thanks in advance!

Hello, John;
You can access the GroupOptions throught .NET RAS. Here is a link to the Developer Library section on groups:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/RAS_SDK/rassdk_net_doc/doc/rassdk_net_doc/html/raslrfCrystalDecisionsReportAppServerDataDefModelGroupClass_MembersTopic.htm
There is a sample of Group and Group sort code in the "VB .NET How To Samples" at:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/RAS_SDK/sampleList.htm
Elaine

How to activate "Issue Purchase Orders" option ?

Hello everybody,
How can I activate the "Issue Purchase Orders" option ? At this moment, every time a purchaser creates a PO in Sourcing Cockpit, the PO is created and sent it immediately to the vendor.
Obviously, I want to change that.. =)
Somebody knows how can I change this behavior and activate the "issue purchase order" option?
Thank you very much for your help !
Diego

Hello Diego,
this is exactly what I already told you in my first reply.
With this customizing option, a PO "trigger" (term used in Post Processing Framework --> term used in output logic !!) is created but not processed immediatly.
You can find this "waiting" output in transaction "Issue purchase order" and execute it, or let a scheduled report do it.
When you save the PO in ECS, FM BBP_PROCDOC_SAVE will call this output creation, then level one update tasks are called (physical update of DB) by the COMMIT. Then level 2 update tasks are called. The PO transfer to the backend is one of those last calls.
So there is no link between PO output and BE transfer.
Except in case of DUMP, I don't see any reason to block the PO transfer because of PO edition.
If your PO is not transfered in BE, this is not because of the PO output.
There is another reason.
Check PO status : is it "In transfer to exec" or "transfer to exec failed" ?
Rgds
Christophe

How can I add "Edit with Photoshop CS5" to the Edit With options?

How can I add "Edit with Photoshop CS5" to the Edit With options?

I think it has something to do with the order in which the PSE and PS are installed on your machine.
For me, I can see option for editing in photoshop both in edit menu and from the action bar. I probably had Photoshop installed on my system before PSE

How to connect my Macbook with an ipad mini in order to have an access to the internet on my iPad?

Dear fellows, I am having a trouble in how to connect my mac with an iPad mini in order to have an access to the internet.

If you are attempting to share your iPad mini's cellular data connection with the MacBook, please check out the following Apple Support article for additional details on how to do so.

How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)

How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)
So I'm adding new songs to a very old playlist? Is there anyway that when I add them, they automatically go to top of playlist? How about getting one song to the top of a playlist. That drag to arrange function is very annoying because it is slow and the playlist does not scroll up very well on a PC.

Make a new playlist by pressing the little plus button at the very lower left corner of iTunes. An new playlist will appear in the Source pane called "untitled playlist". While the name is highlighted, you can change it to whatever you want. Drag all of the tracks from all the albums that comprise a single book to that playlist. Sync that playlist to your iPod.

I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card. How can I buy Pages with my iTunes card to my iPad? thank you

I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card. How can I buy Pages with my iTunes card to my iPad? thank you

Have you redeemed your iTunes card to an account associated with an Apple ID?
Once you have your iPad associated with an Apple ID AND you have an account with a credit card associated with the same Apple ID AND you have some 'store credit' (from redeeming your iTunes card) then purchases use the store credit before they charge the credit card, so you should be ok!
Personally, I use 'store credit' as a way to monitor whether or not there have been any 'unauthorised' purchases because as soon as the store credit is zero, the security code from the credit card is needed for further purchases! It does mean that I have sometimes to top up store credit before making a purchase, but 'better safe than sorry'!

Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to order Option 3 with Fibre?

Similar Messages

Maybe you are looking for