How to output the digital clock and synchronization signal from the NI USB-6211
Hello,
I need to connect the NI USB-6211 to control a digital to analog convertor chip (AD5541). However, this chip requires three input signals :1) Clock input, 2) Logic input or a synchronization signal and 3) Signal Serial Data input (CS, SCLK, DIN).
how to output the digital clock and the synchronization signal from the NI USB-6211?
Hi SaberSaber,
You should be able to use the counters to generate a pulse train that could be used for clock and synch purposes.
Hope this helps. Let us know if you have more questions.
Dave C.
Applications Engineer
National Instruments
Similar Messages
-
How do I transfer my photos and other items from the cloude to my Dell desktop
How do I transfer my photos and other items from the cloud to my Dell
desktopHello johnfromwildomar,
Thank you for using Apple Support Communities.
You can use the following articles to help you set up to share photos from iCloud to your computer.
iCloud: Set up My Photo Stream
iCloud" My Photo Stream FAQ
Regards,
Jeff D. -
The options tweet and facebook disappeared from the notification bar! What do I do?
The options tweet and facebook disappeared from the notification bar! What do I do?
Any restrictions set up in Settings/General/Restrictions?
-
How to add a privacy page and exclude it from the main menu, but include in links at the base
adding a privacy statement page and excluding it from the main menu, but including in links at the base of site
Right click on the page in Plan view and choose to exclude from menus. This will take it off your main nav.
For your bottom nav, change the menu to manual and add the privacy page manually. -
Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSCThank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc -
on my iphone 4 the songs skip in the middle and also stop playing mid song and restart from the beginning and it happens over and over and the song never completely finishes. I dont know what to do
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
Where's the Digital Clock and how do you turn off 4G to go to 3G?
Ok, just did the update and so far so good... exccept for two things.
1) I had a digital clock on my home page prior to the update. After the update, it's gone and I can't find a widget for it. There's one for the anaolg clock but seriously, who wants an analog clock? Is there a way to get the old one back or do I need to find an app for a digital clock. I tried running some digital clock apps when I first got the RAZR but none of them worked.
2) My phone, prior to the update, was left in 3G mode 90% of the time to conserve battery life. Now that the update is done, it's been in 4G mode all day and I can't find a way to revert it back. I have now had to recharge my RAZR after basic usage that I would do in 3g mode that would've left the battery with plenty of charge. Please tell me there's someway to get it back into 3G mode.
Thanks in advance!You can use this Free app to help ya do the switch between 3G and 4G.
https://play.google.com/store/apps/details?id=net.andirc.lteonfoff
Thanks to b33! -
How do I get my movies and /or photos from the iPad to my Mac?
I've taken a lot of photos and movies with my iPad but now I'd like to get them on my Mac so I can edit them. Other than e-mailing them to myself, how do I get them off the iPad and on to the computer?
This is covered in the manual.
You import them as you would from any digital camera:
iPad 2 User Guide (For iOS 4.3 Software)
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer -
How to remove the standard Exit and Help buttons from the iviews
Hi All,
We migrated the ESS application from standalone ITS based on 4.6c to ECC 6 based Integrated one. After converting that into ICF service and when we created the iview for it in the portal(EP 7) It is showing two hyperlink items EXIT and HELP by default at the top of every iview. So, Can anybody tell me how to remove them from visibility.
And also, the iviews are not showing the table grids etc in the integrated environment. Is there any change that need to be done, for getting the table grids and all to look as it is in the previous envoronment.
Thanks & Regards,
RaviHello Ravi,
You should be aware that many of the ESS transaction are not supported on the Integrated ITS, see note 870126 for more details.
To remove the "Exit" and "Help" you can use the ~webgui_simple_toolbar parameter, please see note 1010519.
Some tables have an option to show the gridlines or not. Please see if there is a table options icon in the upper right of the table to change the configuration. I'm not sure if what kind of table you're referring to so it may or may not be available.
Edgar -
How to clean all airport connections and start setting from the begining
I made some mistakes setting airport and now i cant get rid of thosе setting to manage my connections "from the clean sheet". How to delete my network settings?
If you are referring to the wireless network settings on your Mac computer, it's a two step process.
Step One
Open System Preferences (gear icon on the dock)
Open Network
Click on AirPort on the left
Click Advanced at the lower right
Click to highlight a connection in the list
Click the - (minus) button at the bottom of the list to delete the connection
Repeat as needed for other connections
Step Two
Open Macintosh HD > Applications > Utiities
Open KeyChain Access
Locate a listing with name of the wireless network and click to highlight it
Click delete
Repeat as needed to delete all networks that you don't want
If you have an Apple wireless router and are referring to the wireless network settings on that device....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click on the Wireless tab just below the row of icons for the settings page
Click Update after you have made the changes that you want -
How to output a file showing visible time code from the source tape
Can someone tell me which settings to use to output a file that has a visible time code readout from the source tape. I shot an interview and now I want to make a video file for a transcriber so they can include the time code reference numbers from the source video on the written transcript. Also, does the file need to be output from the timeline, or can this be done directly from a clip in the project.
Thanks.
Specs:
PC with Windows Vista
Premier Pro CS4Hi,
You could try maybe selecting all your clips on the timeline and drag the "timecode" video effect onto it ( type the word timecode at the top of effect panel on left to find it fast )...
Then you can change it from smpte if you want -----to source or media ...something like that...or to 'generate'...use what you like best..
you can also change the codes position in the clip...
Rod -
How to best support CT2, CT3 and CT4 clients from the same machine?
I have clients that are still insisting on CT2 and CT3 for
their
editing. I am able to use CT3 with work arounds for my CT2
customes;
but would like to get on with CT4.
Can anyone point me to the Tips and Techniques that will
point out the
"gotcha's" when trying to support multiple versions of CT
from the same
machine?
Thanks,
HowardTo remove file from iPhoto and the HD simply put the files in the iPhoto trash and then go iPhoto Menu -> Empty trash.
This works if you're using iPhoto in the default setting, where the files are copied to the Library on import. If, however, you have a referenced library, you'll need to trash the files in your own folder structure yourself.
Regards
TD -
How to procession session in foreground and errore mode from the program.
hi ALL
i have a requirement in wich i had to create a session and procession the sesion in foreground or back ground from the program it self (with out going to SM35)
argent can any body answer to my question, please
reward gauranty.
thanks in advance
sindu.refer to this link....
Running a session from the zprogram
regds,
kiran -
not very happy, the dark knight was in the 'recently released in HD' section of the HD movies section in the itunes store, does apple owe me a refund for false advertising ? or is there any way to actualy get a hold of the HD copy through itunes ?
I've seen that when I've tried to the length of the audio (or video) clip by dragging the end and had 'snap to' enabled...and it snapped it all the way to the beginning accidently.
-
I followed all the instructions and I have no idea what to do. :(
Basics from the manual are restrt, reset, restore.
Have you tried each of these?
Maybe you are looking for
-
How do I use cookies to control which part of the timeline to play from?
Hi there, I have created an animation with Adobe Edge. My site uses Concrete5 and I am pulling in the Edge content into an IFRAME on my home page (there my be a better way to do this and I'm open to suggestions). I want the animation to play from the
-
hello, my first post here.... so i'm planning to get an ipod shuffle and a nano just to have a shuffle and a nano, LOL, i already own a ipod video. i've read the second method (http://docs.info.apple.com/article.html?artnum=300432) about creating sep
-
How do I create a magnifying glass zoom effect?
I'm building an image 'showcase of work' website site. Each html page features a selection of thumbnails on one side linked to a main image on the other. I am trying to find out how to create something like a zoom effect 'magnifying glass' so that t
-
Hi All, I am using ALV OOPS for handling events.I have a scenario like in my ALV, i will change/insert/delete the records, i need to update the DB table when i press the save button. I need to throw an error if the user enters an invalid data l
-
Hi Masters, I was attended one technical interview two days back. The interviewer asked me the below pl/sql output and explain the process. I said it won't give any error and answer also. He is not happy with execution process. Please find below pl/s