How to overcome sharing violation???
hi all,
i have a database file that is displayed in the browser, when i close the connection and replace the database file with a new one, i get a sharing violation error, the file is still in use .
is it possible to overcome the sharing violation? Does it mean that the file is still being locked??
I have only one dbf file and a type 4 JDBC driver used to establish a connection to it,
The browser displays the content of the dbf file, when the browser is still active, i want to copy a new dbf file to overwrite the original file, and it says a sharing violation.
I dont understand why the JDBC-ODBC bridge doesnt have such problem, i can overwrite the dbf file when the browser is still active.
Does it mean that the table ( which is the dbf file here) is still locked?
When can be the lock released?
i use the code con.close to close the connection and set it to null con=null
Thanks
Similar Messages
-
How to remedy sharing violations when saving an AS3 file.
Since installing Flash CS4 (I previously had CS3) I've had a rather annoying problem that is really cutting into my productivity.
If I 'Test Movie' or 'Debug Movie' and then switch back to my actionscripting window and make changes and then try to save without closing the movie, I receive a sharing violation notification. I then have to close the movie and wait for at least 3 seconds after doing so before a save will succeed without giving a sharing violation.
I know that doesn't sound like much, but when you do it hundreds of times in a day it really eats up time and interrupts workflow.
Anybody know how to remedy this? I've tried creating fresh AS3 files in fresh locations but to no avail. I can find no similar references to it using google.
Thanks in advance. Here's the dialog:As there's not been a single response, is there any way to pass my question on to support proper, and get the answer added to the knowlege base? This is rather important I think.
-
Sharing Violation in DreamWeaver CS6
Hi there,
I am experiencing a 'sharing violation' message in Dreamweaver CS6 when using a web development tool - Mixture. http://www.mixture.io
Basically, when i try to save files in dreamweaver, whilst mixture is running, I get a message saying:
I can eventually save the file, but only because the original file that i was trying to save gets deleted somehow.
Having looked around google, and these communities, it seems this is a common problem with Dreamweaver.
Anyone have any ideas how to stop these type of sharing violations ? - I am using wamp as a local server for development with apache 2, and php.
Thank youHi there Harshit,
Thanks your your help,
I've tried the suggestions in the posts by yourself, and your colleague - unfortunately none have worked:
removing any temp files
searching for hidden files
turning off synchronisation
recreating cache,
turning off cache
turning off indexing on folders
turning off library options in windows explorer.
I still get sharing violation errors - it seems to be a common thread with Dreamweaver. Perhaps it's something that needs to be changed for the windows version.
Thank you -
Sharing Violation in Dreamweaver CS4
hi to Every one i have a problem in Dremweaver CS4
when i am saving my html pages the error message is displaying "Sharing Violation Occured".After that every time this error occur page can be rename and save.can any one tell me how to Slove this Problem.
[Personal contact information deleted by moderator]Hi,
This is a known issue in CS4 and it's a huge pain in the rear. One way to reduce this is to not use the preview (F12 ) function but brows directly to the page in your browser to preview it. This doesn't totally get rid of this but it reduces it. Also, when trying to FTP your files up, and Dreamweaver gives you the "file transfer incomplete" message, have a standard FTP app handy - it will upload the files with our issue, even though DW can't seem to get it done.
This is a major problem with CS4 - I don't know if it tied in to Vista's insane user security system or what, but I hope that they solve this issue either in an update or at least in the next release.
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF -
"A sharing violation occured..."
While modifying a DW template, I suddenly began receiving
sharing violation error messages which disallow saving the file and
thus, updating the html pages based on the template. As I am the
only one to use the program, I consider this some sort of
glitch--any idea how to get around it (in preferences or
elsewhere?)?> reason .dwt files have difficulty in opening in IE7; you
get an Open or
> Save
> dialogue panel instead.
That's because IE doesn't know what to do with a *.dwt file,
since that
extension only means something to DW. Enable preview with
temp files in
your PREFERENCES, and then you'll be able to preview OK.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Paevo Kelley" <[email protected]> wrote in
message
news:gbanvv$7fg$[email protected]..
> Hi Murray; just the local drive. The fundamental problem
is that for some
> reason .dwt files have difficulty in opening in IE7; you
get an Open or
> Save
> dialogue panel instead. Each time, another panel... So
the next time I
> previewed in Firefox, I got the message... Any idea why
IE does this?
> -
Dreamweaver sharing violation on save after previewing file
Hi all,
First, have I mentioned that I LOATH Windows Vista with every
fiber of my
being!
On to the problem at hand.
I'm in Dreamweaver and I edit, then preview a file. Next I
edit it some more
and then try to save it - but cant. I get an alert stating
that there is a
sharing violation because the file is being used by another
program, and it
just stays this way, even if I shut the browser down. even if
I restart
Dreamweaver it's still locked. The only way I can get it to
let go is to
totally reboot!
Has anyone else run into this? Found a solution?
Thanks for your help.
Lawrence Cramer
Cartweaver.comThis is a multi-part message in MIME format.
------=_NextPart_000_006F_01C8550D.5C555090
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I haven't Larry, but let me just double-down on your Vista
loathing. I =
find it ridiculously slow and awesomely awkward. How many
times do I =
have to wait out a "not responding" message when I just
switch to a =
program? How often do I have to change my open file dialogs
back from =
their stupid photo default headers (like Date Taken)? Why do
I have to =
always hard boot my external firewire drive everytime I come
back from =
sleep mode?
If I wasn't doomed to always have the latest OS for screen
shot reasons, =
I would have jumped back to XP months ago.
Thanks for letting me vent - and good luck finding a solution
to that =
issue.
Best - Joe
Joseph Lowery
VP of Marketing, WebAssist
Author, Dreamweaver CS3 Bible
"Lawrence Cramer" <[email protected]> wrote in
message =
news:[email protected]...
Hi all,
First, have I mentioned that I LOATH Windows Vista with
every fiber of =
my=20
being!
On to the problem at hand.
I'm in Dreamweaver and I edit, then preview a file. Next I
edit it =
some more=20
and then try to save it - but cant. I get an alert stating
that there =
is a=20
sharing violation because the file is being used by another
program, =
and it=20
just stays this way, even if I shut the browser down. even
if I =
restart=20
Dreamweaver it's still locked. The only way I can get it to
let go is =
to=20
totally reboot!
Has anyone else run into this? Found a solution?
Thanks for your help.
Lawrence Cramer
Cartweaver.com
------=_NextPart_000_006F_01C8550D.5C555090
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16587"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I haven't Larry,
but let me just =
double-down on=20
your Vista loathing. I find it ridiculously slow and
awesomely awkward. =
How many=20
times do I have to wait out a "not responding" message when I
just =
switch to a=20
program? How often do I have to change my open file dialogs
back from =
their=20
stupid photo default headers (like Date Taken)? Why do I have
to always =
hard=20
boot my external firewire drive everytime I come back from
sleep=20
mode?</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If I wasn't
doomed to always have the =
latest OS for=20
screen shot reasons, I would have jumped back to XP months =
ago.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for
letting me vent - and good =
luck finding=20
a solution to that issue.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>
<P>Best - Joe</P>
<P>Joseph Lowery<BR>VP of Marketing, <A=20
href=3D"
http://www.webassist.com/">WebAssist</A><BR>Author,
<A=20
href=3D"
http://www.idest.com/dreamweaver/">Dreamweaver
CS3=20
Bible</A></P></FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:
5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Lawrence Cramer" <<A=20
=
href=3D"mailto:[email protected]">[email protected]</A>>
=
wrote in=20
message <A=20
=
href=3D"news:[email protected]">news:fm8rel$s87$1@forums=
.macromedia.com</A>...</DIV>Hi=20
all,<BR><BR>First, have I mentioned that I LOATH
Windows Vista with =
every=20
fiber of my <BR>being!<BR><BR>On to the
problem at hand.<BR><BR>I'm in =
Dreamweaver and I edit, then preview a file. Next I edit it
some more =
<BR>and=20
then try to save it - but cant. I get an alert stating that
there is a =
<BR>sharing violation because the file is being used
by another =
program, and=20
it <BR>just stays this way, even if I shut the browser
down. even if I =
restart=20
<BR>Dreamweaver it's still locked. The only way I can
get it to let go =
is to=20
<BR>totally reboot!<BR><BR>Has anyone else
run into this? Found =
a=20
solution?<BR><BR>Thanks for your
help.<BR><BR>Lawrence=20
Cramer<BR>Cartweaver.com<BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_006F_01C8550D.5C555090-- -
When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??
I don't use OpenOffice (I have it on my internal just to play around with, but seldom even open it). I do use MS Word and have few problems sharing files - it's usually a font issue so I tend to use MS fonts for documents that I know will need to be shared.
Unless you need to make collaborative changed to the document, you could always save it as a pdf file. With Acrobat Pro you can even save a pdf file to a Word document with very little change in formatting.
If I were you - and you have a need for .doc or .docx files to travel and play nicely - I'd just invest in MS Office. If you don't have to send a Word file, try pdf.
Clinton -
Identify file sharing violation
For example, i want to write a certain file which is open by other application for writing.... how do i know the IOException being thrown is file sharing violation?
duplicate thread
-
I've been working on a template (my first). All was going
well until I made a change to the format size of my title (I went
from header 2 to header 3). I'm not sure that has anything to do
with it, but when I tried to save the template, I got the message:
"A sharing violation occurred while accessing C:\\Documents and
Setting\WEB140\Templates\pages.dwt. I don't know what I did or how
to make it go away. Help, please.Hi,
It's not possible to add custom templates to the Create New Form tab, but you can export your form design and share that with your colleague.
1. Open your form in the Design view
2. Click the File > Export Design File... menu item
3. Save the .fcdt file
Regards,
Brian -
20896 Cluster Sharing violation
I only have one node in a cluster built so far, and when I reboot it, all the
cluster resources come up, but 2 volumes don't actually mount. They are both in
the same Pool, the pool gets activated, and the cluster resource says running,
but the volumes aren't active or mounted.
upon investigation, the device is not shareable for clustering (which I thought
I did when I created the partitions/pools/volumes, but I guess not). When I try
to enable the device for cluster sharing, I get a 20896 Cluster sharing
violation.
Any ideas on how I can make this sharable for clustering (for when I get the
other node up) or at least make sure they activate when the resource loads?
here's the load script:
#!/bin/bash
.. /opt/novell/ncs/lib/ncsfuncs
exit_on_error nss /poolact=USERS
exit_on_error ncpcon mount STAFF=252
exit_on_error ncpcon mount STUDENTS=251
exit_on_error add_secondary_ipaddress 10.66.15.95
exit_on_error ncpcon bind --ncpservername=CLUSTER_USERS_SERVER
--ipaddress=10.66.15.95
exit 0Agabriel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
OS is Windows7. I'm using the latest version of Mozilla Firefox
I am unable to load some web pages, I get an error message saying unable to load page due to invalid or unsupported form of compression, this happens on the BBC news page for example. Any ideas how to overcome???Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
how to limit sharing apps to only two devices? because i have an iPod touch and an iPad. i just want to limit the sharing of apps to those two. because my brother is using my apple id too on his ipod. i want to limit it to mine only. tnx!
You can go into settings and turn sharing off in the programs on the device you don't want to share too.
-
How to clear shared links in safari?
how to clear shared links in safari?
Hi Dominic23, appreciate your answer but I am referring to LinkedIn Shared Links, does that mean I have to log out of LinkedIn account, is there another way instead to logging out?
Thanks. -
Sharing Violation error when inserting a table
Hi Everyone.
I know this question has been asked before but no one seems to have a working solution.
We have Macromedia MX (6.1) installed on a room with windows 7 on all the computers, on a server 2008 network, connectiing to a server 2003 user area server. It seems to work fine until you try to insert a table which is different to the default options. It then throws up a sharing violation error to do with the table.htm file under the Application Data\Macromedia\Dreamweaver MX\Configuration\Objects\Common\ folder. The program then closes. The things I have tried to get this working so far are -
uninstall and reinstall
deletion of the Application Data\Macromedia\Dreamweaver MX\Configuration\ folder
changing location of Application Data\Macromedia\Dreamweaver MX\Configuration\ folder from network drive to local drive
making sure the user has complete ownership of the folder and the file in question. They do
checking the same problem exists with an adminstrator account and a normal user account. It does.
having the user log on to a windows XP machine connecting to the same server with the same log on account. This works fine! So almost certainly a problem with Windows 7.
runnning the dreamweaver program as administrator
changing where the site is saved to.
Im really all out of ideas. Yes i know that its an old version and the newer versions work a lot better, but this is all we have at the moment.
I really appreciate any help!Hi Chrissy,
According to the description, you were not able to save the workbook after you typo some VBA code. Which version of Office are you using? Are you save it manully?
Based on my understanding, this issue is not realtive to the code and it maybe a know issue about Office 2007. You can fix it via link below:
Description of the 2007 Office system hotfix package (Msoshext-x-none.msp): April 27, 2010
If you still have the issue save it manually, I would suggest that you reopen a new question in
Microsoft Community- Excel forum to get more effective response.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The latest update to itunes has resulted in a whole series of runtime errors (R6034). Microsoft Visual C++ Runtime Library states it is being accessed incorrectly. I am also told that Apple Mobile Device Failed to Start. Additional messages suggest the error is in itunes.exe and ituneshelper.exe. I also get Error 7 (Windows error 1114). Anyone got any ideas how to overcome this (these) problems?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99527)
Maybe you are looking for
-
My ipod no longer recognized by computer
I updated the iTunes program a few days ago, and when I connected my ipod to the computer, the ipod's light doesn't blink and the computer doesn't indicate that a removable disk (ipod) is installed. My son's 5th gen ipod is working fine, no problems.
-
How to upgrade from windows 8.1 --32 bit media to 64 bit media
Dear Sir, Plz provide a link to upgrade OS fro windows 8.1--32 bit media to 64bit media....in my laptop --64 bit Reason: since my touchpad is not working at all Thanks & Regards M.Hanumantha rao 7774034953
-
Adobe CS3 Extended - problem w Bridge - picture displayed wrong in Horrizontal Filmstrip mode
Recently started have problems with Adobe Bridge (CS3 Extended) after it did an automatic update from Adobe for my CS3. The problem is that the panel where the picture appears in "Horrizontal Filmstrip" is now positioned to the far right - partially
-
Opening Balance to be displayed along with line items
Dear Experts, Is there any way to display Opening Balance for a particular GL along with LIne Items. FS10N only provides Period wise opening balance and line items. If I have to select the line items for a GL in the middle of the period and see the o
-
Online filing of CIS Monthly Returns (CIS300)
A problem with the Generic Withholding Tax Report transaction S_P00_07000134, program RFIDYYWT. The 2007 online filing of CIS monthly returns (CIS300) has been set up and is working, but when running the report an additional parameters pop up window