HOW TO PACK THE MATERIAL

my problem is,
i had created one packing material handling unit and i have maintain warehouse management.
i had created sales order VA01, outbount delivery VLO1N and transfer orderLT03.
After TOD(Transfer Order)  i had been going to VL02N in outbound delivery i had been doing in PGI SOME ERROR SHOWN i.e
1. DELIVERY HAS NOT YET BEEN COMPLETELY PROCESSED BY WH
When i am doing vl02n CLICK ON PACK ICON i had shown in one screen i.e handling units packing materials after  I HAD DONE AUTOMATIC PACKING ICON IN TOP RED BUTTON shown one message
there is no packe material. When i was back in showing one message ITEMS IN HU-MANAGED STORAGE LOCATION MUST BE PACKED.
MY PROBLEM IS I WANT TO PACK THE MATERIAL TO HANDLING UNITS PLS  GIVE ME SUGGESTION.
Edited by: munnasd on Jun 10, 2009 9:50 AM
Edited by: munnasd on Jun 10, 2009 12:56 PM

Hi, As described by Ramesh the process will follow. However, for packing the materials you need to check in customizing what packaging materials are allowed for the packaging material group for the material in the delivery. The packaging material group for the said material can be found in Material master view Basic data1 under the tab packaging material data. Then go to SPRO-IMG-logistics execution-shipping-packing-define allowed packing material-execute and check which all packaging materials are allowed for the packaging material group. go to your delivery and packing symbol then tab pack material. in the column packing material enter the allowed material in which you want to pack. then use the pack symbol to pack the material and save the delivery. after that the next process will continue.
Pl share whether it worked....
Regards,
vijay

Similar Messages

  • How to pack the More than one sales order delivery qty in one packing

    Hi Folks,
    How to pack the more than one sales order quantity combinely during packing?
    Thansk in advance and points wil be rewarded for the reply.
    Best Regards
    Srinivas

    Packing is done during Delivery.
    In Sales order also Packing function is available but as a Packing proposal.
    So actual packing is done in Delivery.
    When you process several sales orders together, the sales order items having same Ship-to-party, Shipping point, Route, Delivery due date & Incoterm are combined into one Delivery in the standard system.
    In the delivery overview screen,do the picking by subsequent function rom the menu bar, you will get a button "PACK", click on this system will take you to the packing screen.
    In the packing screen, give the packaging mterial number, select the materials to be packed, select the packaging material also and the click on the "PACK" button.

  • CIN: How to check the material document posted without excise invoice

    Hi Guru,
    Please advise how to check the material document posted without excise invoice.
    I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
    But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
    At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
    Best regards,
    Pakorn

    Hi,
    Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
    Check these threads how to create Query.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
    http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
    Regards
    Binoy

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

  • How to Block the material

    Hi friends,
    How to block the material ,
    what are the implecations if we block a material?
    Regards
    Krishna

    Hi,
    The best way is to keep the materail status with deleted or blocked for puchase / sales and need to maintain in the materail master.
    You cannot delete the material from material master until archiving but you can block that material for any procurement
    Goto Basic data 1
    X-plant matl status -
    01 Blocked for procment/whse
                                           02 Blocked for task list/BOM
                                           10 Blocked for MRP
    Select any one.
    Valid from  -
    Here you enter valid date from which the material should be blocked.
    So from this your material will be blocked for any PR/PO/any transactions related to Procurement
    BR,
    Krishna

  • How to see the material document for Blocked stock

    Hello Experts
    I having some blocked stock in plant X , How to see the material document for this stock.
    Thanks in Advance
    Prashanth.v
    Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PM

    which material documents do you want to see?
    Material documents can be found and displayed in MB51 transaction.
    in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
    block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
    if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa.

  • How to create the material using outbound IDOC

    Hi all,
    how to create the material using outbound IDOC.

    Hi..
    follow the steps...
    1) create a partner profile for material
    2) create a material
    3) go to transaction BD10 , give material no  and then execute.
    4) go to transaction WE02 to chk the status.
    if you want to send Outbound idoc automatically once the material is cretaed then use change pointers concept.
    please get back  to me if you need any assisstance further.
    Regards,
    Lokeswari.

  • How to track the material in WIP stage

    Hi all,
    our product flows in differt stages from raw material to finished product. For example first it goes to Melting,than to foundry,than forging and lastly it goes to machine shop from where we get the finished product.
    my requirement is I want a way  to track the material in this WIP stage. where this material is datewise or if now i want to know at which stage (melting , foundry , forging, machine shop ) the material is, how can I find ?
    Is there any std report for this?
    Regards
    Kumar

    Hi,
    Unfortunately no such report was available in SAP.
    But SAP has introduced EHP4 to address the requirement.
    Follow the link given,
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ff2779-f9d3-2b10-9dab-e9d84c5953c5?quicklink=index&overridelayout=true
    You will have to activate the 'Work in Process Batches (WIP Batch)' functionality in EHP4.
    Or else go for some develop report for the WIP.
    Hope this helps you.
    SmanS

  • How to block the material qty to 1 while creating sales order (VA01)?

    Hi All,
    Scenario :  We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
    so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
    Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
    Kindly guide me how to proceed.
    Thanks,
    Renjith

    If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
    Regards
    Sridhar

  • How to convert the material automatically at the time of goods receipt?

    Dear Friend,
    A small example gives clarity to my question ie suppose if a steel plate of size 6000x2500x10MM is procured.  We received the material but we need to issue to subcontractors with different sizes say 1500x2500x10MM,1500x2500x10mm, and 3000x2500x10mm.  How to issue?
    Regards,
    TS.

    Hi there
    Just mantain variable units ie one unit for stock keeping in the stores and aloso if needed for procurement and the other which would be issuing unit.
    You can get the feild in basic data 1 of material master...
    But it would be at the client level..
    Just mantain varible unit if you need..
    Reward if useful
    Regards
    Sujoy

  • How to ignore the material with error in costing run ck40n

    Hi
    Pls, advice how to ignore parent material form costing run if the components of that material have errors. I need to run the costing run excluding erroneous parent item. Is any configuration on this..
    Pls help..
    K

    Hi Kesharika Goona... 
    If you want to exclude any material from Costing Run, there are two ways...
    1. Go to Material Master, Costing1 view, take the check box "Do Not Cost". If you opt for this check box, the system will not consider this material for costing.
    2. Where you run the standard cost estimate in CK40N, once you save you costing run with the parameters like Costing Variant etc, When you select the "Parameters" agains the Flow step of "Selection", you will be asked to give the inputs like Material Number, Plant etc.
    There, against the Material Number, on the extrem right side, you will see a arrow, press that arrow, and there you can see a tab "Exclude Single Values". There you have to give the material number which you want to exclude from the costing run press "Execute" icon on the botoom-left corner of that pop-up window..
    If you still face problem, pls revert back
    Srikanth Munnaluri

  • How to get the material list displayed in CU50 transaction into ABAP report

    How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
    I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
    But I want only the material list displayed in CU50.

    Hi,
    Could you please tell us how you found a solution to your problem?
    Thanks & regards
    Hassan

  • How to storage the material involved in an imovie project

    Hello,
    I want to start a new project, but as my last one is super heavy (340GB) i want to save all the material involved in that heavy project (the project+ the events,gop, etc) in my external hard drive so i can free space from the macbook and start fresh the new one.
    i want to save all the material, because i want to keep editing it, but in the future.
    i tried the option "free space" of the opened project but it started to delete the videos imported that were used in the project!!! so, i canceled that, restored the clips and came here to ask what exactly has to be saved and how. (note: i didnt try the option that delete the rejected clips -whatever that means!-)
    plus, one doubt: for that project ive imported almost 23 videos of 1 hour long aprox each (weddings, baptisms, birthdays, ect) but use of course some seconds of each one. is there a way to save only the seconds included in the project and NOT the whole videos? both questions are related i think..
    Thank you
    Vicky

    Yes, you can do this. You will need a free app called MPEG Streamclip. Complete instructions are here.
    https://discussions.apple.com/docs/DOC-3231

  • How to change the material group in existing PO

    Hi
    I want to change the material group in already exist PO. like one material have the material group 1002. i have changed the material group in material master i.e. 0022.
    In already existed PO for this material, material group is not changing. how do we do this.
    Thanks
    Pankaj Garg

    if ur po is processed then it is not possible
    if it is not processed for gr then just delete the existing material and give new entry of material in same po
    regards
    kunal
    award if helpful

  • How to view the Material Value Involved in the WIP Closing Balance Report

    We are able to see the Itemwise WIP Closing Value using KKAQ. 
    We have one requirement that to know the Material Value & Quantity Involved in the WIP Closing Balance Summary. 
    How to fetch the information for Material Value , Process Value With Quantity on Itemwise from WIP Closing Balance.?
    Thanks in Advance
    Regards
    K.Natarajan

    Dear Premkumar,
    Thankx for your reply.  But when we execute the T-Code KKBC_PKO for an Item, It is giving an error like "No product cost collector exist for material/plan/prod.process <Matl.COde>"
    How to see this report. 
    Regards
    K.Natarajan

Maybe you are looking for