How to pair my white apple remote with my macpro?

this is the kind of mac I have G87151S7UQ2 (I think?)
its a tower pro, and I'd like to pair my white apple remote with it
Thank you!

The Mac Pro does not have a built-in IR receiver. You can however buy a USB IR receiver and use that in conjunction with your Apple Remote.
See http://twistedmelon.com/mira/hardware.html

Similar Messages

  • Im havingtrouble pairing a new apple remote with apple.tv. Any suggestions? Have followed directions so far.

    Im havingtrouble pairing a new apple remote with apple.tv. Any suggestions? Have followed directions so far.

    A classic chicken/egg problem. I see this in the Apple TV manual:
    You can also hold down Menu and Right for 6 seconds to pair Apple TV and the Apple Remote.
    When you successfully pair your Apple Remote, Apple TV displays a chainlink symbol (          ) above a picture of a remote. Apple TV now works only with the paired remote.
    You might have to change your screen name (kidding).

  • How to use new aluminum apple remote with an imac

    How does it work?  Menu button doesn't seem to do anything.  I paired it io and got the linking chain icon.  The volume up down works, and sometimes the left right buttons move itunes to the next selection, but that's it.  I was not able to find an online articel

    You can load your RAW images to any iPad either using the Camera Connection kit that comes with two dongles. One for inserting an SD card from your camera to load the images. Or the USB dongle which you can connect the USB cord for your camera to the iPad to load the images. There are a few CF card readers that will work with the iPad if your camera uses those a Google search will feret them out for you. Additionally, you can also load images to iPad, iPhone or iPod touch (as well as laptops and desktop cumputers) using WiFi as you capture them using an EyeFi SD card.
    http://www.eye.fi/
    A good app for working with EyeFi on the iPad is Shuttersnitch (though, it does not coordinate with Lightroom)
    http://www.shuttersnitch.com/
    Unfortunately their isn't any RAW processing image editing software for the iPad that Lightroom can make use of the edits. Though there is an app called Photosmith that will allow you to rate, label, add keywords etc. then you can upload that info to Lightroom on your laptop or desktop cimputer and have that info synced to the images. You do have to transfer the image files themselves from the iPad to your workstation seperately.
    http://www.photosmithapp.com/

  • How do I use apple remote with iPhone 5 ?

    How do I use apple remote with iPhone 5 ?

    Iphones dont have ir at all which the remote use for comm
    Only option is to use a dock which have ir

  • How can I use apple remote with Mountain Lion? Any Front Row alternative?

    Hi All,
    I recently upgraded from Snow Leopard to Mountain Lion.
    All great except for my Apple Remote control.
    Before, I could effectively control my iMac media with Apple Remote by using Front Row (music, photos, videos, good integration with iTunes and iPhoto).
    Now, as I understand, Front Row is expired.
    So, my Apple remote still works but with very limited options (just music, forward, backward and volume), and it's a real pity.
    Any of you Guys know how to restore Front Row?
    Otherwise maybe suggest an alternative (sth similar, should allow iMac media control by Apple Remote)?
    So far I tried to restore all Front Row files by a Time Capsule Snow Leopard backup (as indicatred on some other Communities).
    To restore was easy, but then, no way to launch it.
    Any advice will help!
    Thanks in advance/all the best.
    Marco

    Thanks Klaus1 for your prompt answer, although I went again through a dated discussion.
    I also got the feeling that somehow they want to push Apple TV..
    But, respectfully speaking towards our Friends at Apple, is it fair to promise what you don't deliver?
    I have choosen apple because I percive it's different.
    At currently published link: http://store.apple.com/uk/product/MC377Z/A/apple-remote
    they do promote the following:
    Apple Remote with Mac
    The Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It works with Front Row - a menu-based, full-screen interface - to make accessing the digital content on your Mac as simple as navigating your iPod. When you press the Menu button, your desktop fades and the sleek, Front Row interface takes its place, to give you control over your music in iTunes, your photos in iPhoto, the videos in your Videos folder and your DVDs. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slide show, a home video that you made in iMovie, even a film trailer.
    Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver. Not compatible with MacBook Pro with Retina display.
    Cost for this is 15£ (19€).
    Now, I have iMac and Mac Book Pro (no retina display) both with Mountain Lion installed, and I understand both of them are not compatible with Front Row.
    Actually I adore apple tv and I got 2 at home nicely working on 2 different TVs.
    So I accomplished twice their wish of selling this product to me.
    Why shall they deceive me (and many others, as I read) by killing a still promised service?
    Should I read all forums before buying a trusted-brand-product like apple, to ensure that id does what declared?
    Don't get me wrong, I'm an enthusiast user of the whole apple family, since many years, and still I am.
    Just politely complaining for this decision, which creates to Many an easy avoidable disservice.
    Cheers
    Marco

  • White apple remote and 2010 MBP

    The white apple remote which came with my 2007 24" iMac randomly stops working on my 2010 15" 2.4 MBP during my slide show which is very annoying, I have to switch out of keynote presentation to system preference panal and click on the pair botton under Security settings to get it back to work again. (I teach so it's very distracting for both my students and me), it happened once yesterday during class I thought it was the battery so I went out and got a new one during class break. Guess what, it happened twice today too. I checked with Photo Booth by clicking the remote directly into the iSight camera to make sure that it has no problem emitting infrared beam.
    What's weird is it had no problem working on my wife's 13" 2010 MBP what so ever (I used to take her computer to class before I got my 15" last week).
    Anyone can offer me any help or has ever gotten in to situations like this? I'd hate to go back to the apple store for a exchange since the new 15" runs pretty well and the both apple stores in Beijing are always packed.
    Thanks in advance!
    oh and also, ever since 10.6.5 update I have to restart my computer before every class to get it to recognize a projector, any one knows how to fix this too?

    This might not be the best forum for solving your problem, you might do better on <http://discussions.apple.com/forum.jspa?forumID=1296&start=0>, for interfaces.

  • How do i use my apple remote on my macbook pro

    how do i use my apple remote on my macbook pro?

    Hi,
    System Preferences > Accounts > Your Account
    Select current  Pic and chose to Change it.
    You get an option to take a SnapShot.
    Quicktime will also be able to access it and record using Quicktime  X in Snow Leopard.
    Check the Menu items for New Recording.
    MSN for Mac can use it (It depend on version and in some cases whether you are connected to the correct type of Windows server)
    Yahoo (This is in Beta 3 and has been for years)
    Results can vary.
    A Web Browser with the Flash Plug-in active can access the camera on certain Web Sites that run video Chat rooms
    See Koowy
    (Type anything to Create a Room Name
    On the New Page allow access to the camera in the Flash Pop Up - You may need to use the tabs to Select Camera type.
    Send Buddy the URL of that page).
    Also see Here (Work by EZ Jim)
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:44 PM      Saturday; May 7, 2011
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do you get the apple remote to STOP always launching iTunes????

    After upgrading to Snow Leopard, I have discovered a few annoyances. The biggest one is that the Apple remote is always launching iTunes when I use it. Even when the Finder is not the target app.
    I have my entire Star Trek collection on a firewire drive, and I like using VLC to watch them because of the playlist feature. Every time I use the Apple remote to try to skip to the next episode, it launches iTunes and begins playing music. This NEVER happened before in Leopard or Tiger.
    I have gone through the iTunes preferences and also looked for some obscure system preference to deal with this issue, but so far, no luck.
    Again, the]is NEVER happened under previous operating systems, so I'm going to assume it's a glitch in Snow Leopard.
    Does anyone know what's happening here??
    Help me obi-wan.

    HI,
    Open System Preferences/Security and turn Disable remote control infrared receiver.
    You may have to click the gold padlock icon to do this. You will be prompted for your
    Admin password.
    Also, when you come across a "bug", report it to Apple.
    http://www.apple.com/feedback/macosx.html
    And it seems you are not alone...
    http://forum.videolan.org/viewtopic.php?f=12&t=64304
    You can try to re "Pair' the remote also.
    To pair an Apple Remote with your computer:
    Hold the remote close to the computer (3 to 4 inches away) and point the remote at the front of the computer.
    Press and hold both the Menu and Next buttons on the remote until the paired-remote icon appears on your screen (about 5 seconds).
    To unpair an Apple Remote:
    Choose Apple menu > System Preferences, click Security, and then click General.
    Open the General pane of Security preferences
    Click Unpair.
    Carolyn
    Message was edited by: Carolyn Samit

  • Using apple remote with ipod touch 4th gen

    i've seen on the apple website that you can use the apple remote with the ipod 4th generation. how does it work? because isn't the apple remote an ir device? or does it work off bluetooth? some advice on how to use the apple remote would be great. thanks.

    You also need Apple's Universal Dock. The description of the remote says:
    Note: The Apple Remote requires the iPod Universal Dock and any iPod with a dock connector or any iPhone.,Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver.
    Remote:
    http://store.apple.com/us/product/MC377LL/A?fnode=MTY1NDA3NA&mco=MTM3NDk5Mzk

  • Mac Mini Late 2009 support white Apple Remote?

    Just got a refurb 2.26GHz Intel Core 2 Duo with 2GB 1067 MHz DDR3 running 10.6.3 to replace my G4 Mini (using Mira remote)as a Media Centre. I've installed EyeTV and the EyeTV remote works fine, but the white Apple Remote I have does not. Remotes are not disabled in Preferences - remote just doesn't register at all. This remote though does work with my MacBook as well as the G4, so no problem with that.
    Do these new Minis support the old remotes? I've also just installed Boxee; any remote issues with this?

    The white apple remote should work fine with any Intel Mini -- although I can imagine a scenario in which third-party products/software might interfere.
    (BTW where are you finding a Preference setting for disabling an Apple remote?)

  • Can I use apple remote with if1 speakers?

    I have a fourth generation ipod and I am thinking about buying a sonic impact ifusion or if1 as it is also called. It does not come with a remote and I was wondering if I could use the apple remote with it? if some one owns one of these or knows anbody whi does and they can tell me if the apple remote works with? Thak you in advance .

    I must also add that i know the If2 come with a remote but i would rather get the older and slightly cheaper If1 because it is white and i have a white ipod.

  • On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any ti

    On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any tips on how to sort this out please.
    iMac, Mac OS X (10.7.3)

    It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
    There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long.

  • How do i use my apple id with ichat?

    how do i use my apple id with ichat?

    Hi,
    Only @Mac.com and MobileMe Apple IDs are valid AIM names as well  (And the Passwords need to be 16 characters of Less - AIM end Issue).
    If you have any other form of Apple ID then you will need to register for either an @mac.com name  or create an AIM one.
    NOTE The @Mac.com Registration requires you link an active Email to the @Mac.com name.
    THIS CANNOT BE an Email address you have used for an Apple ID already.
    The AIM Registration asks for Email address for Security and Password Recovery and is not Hard Linked in the same way (you could use the same email to set up multiple accounts/Screen Names)
    To state things another way:-
    A MobileMe ID is an Email address.
    It is an Apple ID and will work in those places it is supposed to, iTunes, Apple Support Communities (with Alias set up), Face Time (With Registration) Apple On-Line Store, Mac App Store.
    It is a Vlaid AIM NAme as well (If the password is kept to 16 characters or less).
    @mac.com names are Apple IDs with the same access as above.
    It is a Valid AIM Screen Name.
    If it was registered before MobileMe started it maybe linked to a Current MobileMe account as a valid Email.
    A Current Registration is purposely for iChat use and Requires a Non Apple current Email that is NOT linked to any other Apple ID
    Any other name or Email used to create an Apple ID is not an Email with/through Apple.
    It is NOT a valid AIM screen Name.
    It is only an Apple ID that allows access to the places listed above.
    If it is an email this cannot be used to Register with @mac.com
    I hope this is clear.
    8:18 PM      Saturday; July 2, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • How do i connect my apple ID with itunes?

    I keep on trying to sign into itunes with my apple id, but it never works . How do I connect my apple ID with itunes?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. 
    You may find that when you try to do this, the password for your old ID it isn't accepted.  If this happens, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Maybe you are looking for

  • VPN not working after upgrading to Mavericks

    After upgrading to OS X 10.9 Mavericks - VPN not working. I am able to connect to VPN server fron inside local network, but can't do the same from outside through the router (1. I have statis external IP 2. NAT port forwarding is OK 3. Other services

  • How to Hide a column in OBIEE 11g

    Hi, I am trying to hide a column of presantation layer table in OBIEE 11g. But it is not working. I am doing the follwoing. Open the permission tab of the column. Given no access to Everyone. Given No access the user/Application Role. When i go to we

  • List of sales inquiries

    Hi, How to find out list of sales inquiries? Prashant

  • Output determination is missing

    Hi Friends, Combination of Purchasing output determination : Vendor is missing in MN04 Can you tell me how to reset again?? Thanking you in advance... Best regards, Shrinivas SS

  • DMP Files

    I've noticed that a large number of *.DMP files are being produced in my %USERPROFILE%/Application Data/Macromedia/Dreamweaver 8 folder in Windows 2000? I'm guessing that these are dumps of some kind and are now taking up some 30MB. Is there some set