How to pan audio – precisely?

I have a subsequence, where I want an audio track to pan from left to right, say from -70 to +70. I can do this by selecting track key frames, show pan key frames. Using the audio mixer I can set the panning to -70. I then set a key frame at the start of the clip and move CTI to the end of the clip. Now I cannot use the audio mixer to set the end value to +70. I can change the value, but it is ignored without change (it reverts as soon as I move CTI), allegedly because the key frames indicate that automation has been added to the track. It seems that the only way is to move the key frame with the mouse and try to get as close to +70 as possible.
What have I overlooked? Clearly, there must be a way to do this? For volume, the Effects control can be used, but it has no panning control. I know, I could use a balance effect, but it seems as an overkill for a simple panning.

VidMuze,
This is a "slippery slope," and things can get pretty gray.
As an example, the MOD on the Adobe Premiere Elements Forum is part of a multi-tier Web site, Muvipix. It's multi-tier, in that it is open to post and read (their Community Forums) to anyone. If one takes advantage of the free "sign-up," then there are many articles, etc., that become available, and more material that is available for a price to download. Then, there is a full subscription, where everything is available for no additional charge. When he, or I, link to Muvipix, we try to explain the multi-tier aspect, and define what is available for free, just so that there are no surprises. As Muvipix is in partnership with Adobe, some potential issues are probably skirted, but still, no one wants to give the impression that EVERYTHING there is for free. Sometimes a tough call.
Also, that MOD is an author of books on several Adobe programs (plus a few non-Adobe programs), so linking to his books is a bit of a touchy subject. Still, individually, he's an Adobe Partner, so some of the legal stuff is covered in contracts' fine-print.
Good luck,
Hunt

Similar Messages

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • How to stream audio in Windows Phone 8.1?

    I have a Windows Phone Silverlight 8.0 app I want to update to 8.1 using WinRT. It streams audio in the background.  In Silverlight, I used
    BackgroundAudioPlayer to set the Track to a Uri.  It's not clear how to do this with
    MediaPlayer in WinRT.  I don't think I can just use a Uri.  Instead, I wonder if I have to use
    MediaPlayer.SetStreamSource(IRandomAccessStream
    stream).  If so, I don't know how to get an IRandomAccessStream from a
    Uri.  I want to stream from a Uri on the internet over HTTP, not from a local file. Any help?

    Refer following links to stream audio in background in Windows Phone 8.1 Runtime app.
    https://code.msdn.microsoft.com/windowsapps/Background-Audio-in-WinRT-344bcf4d
    http://blogs.msdn.com/b/johnkenn/archive/2013/12/31/supporting-background-audio-in-your-windows-8-1-app.aspx
    Thank you for thinking about my problem. I may be mistaken, but I think the above links refer to Windows 8 apps, not Windows
    Phone 8.1 apps. I'm under the impression that background audio is done differently in Windows Phone 8.1 from Windows 8. The
    Background Audio Overview for Windows Phone Store apps explains more. 
    It's a good overview, but does not explain how to play audio from a stream rather than a file.  That's what I'm stuck on.

  • How to restore audio in iOS 8 (beta 5) after requesting mic access?

    I posted this question over on StackOverflow before realizing that the AIR team might be working on a fix: http://stackoverflow.com/questions/25168882/air4-how-to-restore-audio-in-ios-8-beta-5-afte r-requesting-mic-access
    In a nutshell, requesting microphone input in iOS 8 will terminate all audio if it's done AFTER a sound has already been played, but not if it occurs before (sample code is in SO post).
    Apps were tested using an iPad 3 the Flex 4.6.0 SDK with AIR 4.0, and with AIR 14.0 - the same behaviour was exhibited.
    This poses serious problems for our apps, which are already released and being updated for iOS 8, so please let me know if this is a known issue, and if not, whether you're able to confirm from your side.
    Thanks!

    Yes, exactly the same flow on our side - interesting to know that it's FLV as well.
    My problem remains, though: in iOS 8, if I play a sound (via MP3, SWF, etc) and then check the mic, all further sound in the application stops indefinitely until I close/reopen the app. Since we need to record audio at various times in the app, this will cause a major problem for our users!
    I've added a bug in the hopes that someone can verify the problem: Bug#3801262 - Requesting microphone access in iOS 8 (beta 5) terminates all further audio
    Thanks!

  • How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

    How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
    Mac os x 10.9.2. ; Garageband 10.0.2

    There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

  • How to send audio files as attachments?There is no attachment option in mail and no share option in MUSIC

    How to send audio files as attachments?There is no attachment option in mail and no share option in MUSIC

    i have some voice samples in Music file .how to share those files? or plz tel me where to store the voice samples

  • How to normalize audio (streaming .mov output)

    We are trying to figure out how to normalize audio. We're using v. 3.0.5. Tried Peak Limiter, and tried the highest setting, and the highest amplitude samples of the waveform did indeed reach 100%, however the noise floor was raised significantly more in proportion. We are looking for a function that will take the guesswork out of the audio settings -- i.e., the typical normalization function you find in most audio editors. Set the percentage of digital full scale that you wish the loudest peak to reach (e.g., 97%), then the entire waveform is increased an equal amount. Even better yet if there is RMS normalization, but I doubt that is in the app. Thank you.
    Chris

    In FCP you can select your audio, choose Modify -> Apply Normalization Gain and set the threshold. In some cases it will raise the noise floor, but so will any automatic plugin.

  • How to get audio to an overhead projector from iPad

    Hello All. Has anyone figured out how to get audio from ipad to an overhead projector? I know I could mirror if I had HD, but I do not have HD at work.

    U could try using the headphone jack sound can be output through this using the appropiate cord to connect to your projector.

  • How to Pan/Crop a Video?

    Alright, I'm a complete newbie when it comes to AE and I can't figure out how to pan/crop videos like in Sony Vegas. I need both my video and text to  be in a different position, but amazingly I couldn't find any results online. I am running CS6 , thanks for any help I can get.

    Getting started with After Effects
    Really, read it. If you can't even do a basic crop, then you'll forever run into trouble with the simplest things.
    Mylenium

  • How to use Audio and Subtitles in iTunes?

    Hello Everybody,
    Anybody can help me how to use Audio and Subtitles in iTunes under Control/Audio and Subtitles?
    Its not active, So, how to watch a movie with subtitles in iTunes?
    Regards,
    Boudy,

    Hello Abdelaal. I have the solution for you!
    In App Store, there is an App called "iSubtitle" it can merge .mp4 and .m4v files with .srt files! Hereby you can use subtitles in iTunes!
    Hope it helps you
    Yours Sincerely
    Thomasen.

  • How to get audio into Adobe Premiere Elements 12?

    How to get audio into Adobe Premiere Elements 12?
    I have filmed an air show with a very good camera JVC pro
    And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
    I think I tried everything for 4 days now.
    Sound in my computer works perfectly
    I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
    I have checked the sound card.
    Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
    It's not normal if you will keep on producing audio for over 4 days at Adobe
    The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
    My name is Thore Hult
    live in Karlshamn in Sweden

    Thore Hult
    On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
    For your immediate problem.
    What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
    Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
    for your Audio Name and Status.
    http://www.headbands.com/gspot/
    The other properties of the file there would also be of interest.
    When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
    If so, do you wait for it to complete before you move forward in the project?
    Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
    Can we assume that your troubleshooting has included checking
    a. Volume control within the project
    b. Edit Menu/Preferences/Audio Hardware ASIO
    Let us start here and then we can decide what next if necessary.
    Thanks.
    ATR

  • How to use audio and mic with multipoint server with out it crashing on you

    how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
    them to work at the same time and if posible can i use a non USB device 

    Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
    Claude

  • How to replace audio track in mpg file (3,4 Gb) by mp3 fies?

    How to replace audio track in mpg file (3,4 Gb) by mp3 fies? Without loosing video quality?

    I've never used muxers under Linux, but you can try mpegdemux.
    Take a look at Elecard Xmuxer Pro, for example – but that costs $$$. Look here and you may find a good, free Windows-based tool.

  • HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

    The article is
    "How to extract audio from a movie file"
    But it only tells you how to extract when you first drag the movie file into the project.  This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
    Here was my workflow:
    Dragged the movie file into my project
    I checked "Extract the audio track"
    I shifted the "Movie Start Time"
    Extracted audio track did not shift with the movie
    I deleted the extracted audio and played the audio directly from the movie
    Now, I need the audio extracted again at the current movie position
    I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
    Is this option still available, or has it been removed?

    Solved:
    I found the menu option for extracting or re-extracting the movie audio.  BTW, the original article:
    Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
    should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
    Here's the menu command:
    File>Movie>Import Audio from Movie
    Cheers

  • How to Make Audio Video Broadcasting Programe using JMF

    hi i m newto java programing i wan to know can any one help me out how to transimit audio and video over netwrok from one pc to other computer voer the network . i m using my webcam to transmit video can any one of u email me the code if any one has made such application like this .. my email is [email protected]

    Well you've found the root of your problem. It's not necessary the JMF. It's when you make a jar file, you need to include the dependencies. I don't think it' legal to include the JMF in a program you sell or distribute, so be careful there.
    However, to include dependencies in jar files is not a hard task. The simplest method is to unjar the dependency and place it at the top or your classpath; then make a jar that includes both your program, and the dependency.
    A more long term solution is to use a build system such as ant or maven to create the package using available scripts or plugins. The "Uberjar" plugin for maven comes to mind.
    -vito

Maybe you are looking for

  • Related to Thread.

    Hello everbody, This a a part of my application code. There is a return statement, what I want is to view the value of the 'dWord' before returning, I know this is not possible with the code and I know I have to use Thread.sleep() for the purpose so

  • Function Module to get TR released to PC4

    Hi all, I need a Function module to read the TR that are released to Quality systems and Production systems. I will pass a table of TR as input parameter to the function module. And the function module should return a table of values containing those

  • FI GL Comparsion to Billing Invoices

    What is the best report to run that shows all billing docs which got posted into Finance for a time period. I am trying to compare my G/L accounts to MC+E report and am out of balance. I am thinking if there is another report or tables that I can do

  • Lost Lens Profiles in LR5 on MBP running Yosemite

    LR5 on my Mac Book Pro (after upgrading OS X to Yosemite) does not list all the lens profiles for Nikon or third party lenses and offers only 5-6 choices, non of which match my lenses.

  • Run Time Error :OBJECTS_OBJREF_NOT_ASSIGNED

    Hi All, In ECC 6.0, for several employees minor changes in masterdata like changing the address, telephone no. etc. is resulting in a run time error <b>OBJECTS_OBJREF_NOT_ASSIGNED</b> <b>Short text</b>    Access via 'NULL' object reference not possib