How to Parameter WRT54GS to connect to Internet through Livebox-2 ?

I intend to connect a network built around the WRT54GS to Internet by passing through a second network who is already connected to Internet through the Orange Livebox-2 (French).
I have a traditional home network with basic shares on the French Orange Livebox-2 and its WiFi.
The computers runs XP - Pro .
My ADSL access is normally through the Livebox-2
(Range of addresses 192.168.1.xxx) and I run DHCP
Working Group "WORKGROUP".
It works without problem (Internet and VoIP telephony) except the Wifi of the Livebox which is known as poor (range and stability).
I also manages a small "pedagogical workshop" for the school who visit my mill.
This network is available to my young visitors based on a (tower) server containing the libraries and teaching materials and its printer. It’s XP - Pro machine. and to allow a maximum of two laptops be WiFi connected.
The second network is built around the Linksys router (wich integrates no modem, simply a router).
The WRT54GS router (rev 6) whose firmware is original Linksys up to date.
I am setting the two Wi-Fi (Livebox 6 Cnl) and Cnl 4 on WRT54GS and different keys (this is manageable without difficulty).
It has its server DHCP and Wi-Fi to connect their machine.
What about the name of this second network group ? Currently “WORKGROUP” as well.
I am setting a range different on the router WRT54GS (192.168.2.xxx) and enabled the DHCP.
This "educational" network works perfectly when alone and separated from the "home" network and doesn’t get connected to Internet…
I want to connect this router Linksys WRT54GS rev6 cascading through the Livebox-2.
Share Internet via the Livebox-2 access.
What about functionality?
What is the connection to setup ?
Should it be simple physical connection with a cable between the yellow ethernet port "2" of the Liveboxbox and the "Internet" connector of the Linksys router?
Is this a good track to explore? I have searched extensively on the Internet but found proposals who are very old and refer to old Livebox... I did test and is not satisfactory...
I have described as well as possible the needs and the config!
It is the experts to speak now !
I am available for further information.
HOW CAN I ACHIEVE THE INTER CONNECTIVITY?

From what I understand, you want to extend your internet connection - from the Orange Livebox-2  to your WRT54GS. You can actually do this by cascading the linksys router to your livebox. There are tow ways in cascading routers: LAN-LAN and LAN-WAN. For more information about cascading routers, you may refer to this link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=104&....

Similar Messages

  • How to connect to Internet through a LAN

    Hi everybody !!!
    Please show me how to connect to Internet through a LAN (through another computer).
    On Windows XP system, i use the following informations to do that:
    + My IP: 192.168 .1.45
    +subnet mask: 255.255.255.0
    +default getway: 192.168.1.12 (IP of another machine)
    +Preferred DNS server: 85.255.192.2
    +Alternate DNS server: 195.131.52.130
    and in IE i use the proxy server: 192.168.1.12:8080
    Thanks alot !!!

    Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
    I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
    All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

  • TS1253 I am connected to internet through  modem. How can I use Time Capsule as a wreless harddrive and connection to USB printer

    Can I use a Time Capsule as a part of my network> I am connected to internet through modem and want to use Time capsule as  a wireless harddrive and wireless connection to usb printer. How can I do that? Please help

    This type of setup is not officially supported by Apple.
    It might be possible to configure the Time Capsule this way, but please take a minute to consider a few things that you may not have thought about, as this is...frankly....the worst possible way that you could configure the Time Capsule.
    Wireless backups will take twice as long as normal wireless.  Why? The signal must make a "double hop".
    Hop "one" would be from your Mac to the wireless router, then the signal must make hop "two" to get back to the Time Capsule.
    In addition to doubling the time for backups to occur, this doubles the chances for an error to occur during a backup.
    The Ethernet ports are not enabled at all on the Time Capsule when it is configured this way, so backup over much faster Ethernet is not possible.
    The USB port is enabled, so assuming that the printer is compatible, it could be configured to connect that way. Keep in mind that only printing is supported. If you have an All-in-One device, advanced functions like scan, copy, maintenenance will not be supported.
    So, do you really want to try this?  There are no guarantees here that things will work at all.

  • RV 120W:How to block device from connected to interner through device name?

                       Hi guys,
    i am using the router,rv 120w
    can i block device from connected to internet through device name?
    for example,the Android Phone wil always has "android" in their device name.How can i block the device which has "android" in their device name from link to internet?
    Thanks.

    Good morning
    Thanks for using our forum
    Hi Louis, my name is Johnnatan and I am part of the Small business Support community. You can´t block any device by the name, however you can block devices using it mac-address. Go Firewall> Access Control>Mac Filtering in this section you can specify the mac address of  the devices and block them.
    I hope you find this answer useful,
    *Please mark the question as Answered or rate it so other users can benefit from it"
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

    I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

    Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

  • I am unable to connect to internet through my tata photon  ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

    I am unable to connect to internet through my TATA PHOTON + ZTE device.
    Please help.

    https://discussions.apple.com/thread/3680625?tstart=30
    Best.

  • After updated OS X 10.9.5 this afternoon, I couldn't connect to Internet through wifi. Please help me!!!

    After I updated osx 10.9.5 I can't connect to internet through wifi. So, what the problem please help me to solve this problem urgent!!!

    I've been having horrible wifi connectivity problems with my mid-2012 MacBook Air for the last several weeks.  I just realized today that the problems started around the time that I upgraded to 10.9.5 on September 17th.
    It's reached the point where I keep Airport Utility up in a corner of my screen so I can see whether I have internet or not before hitting Send or Post.
    After reading Linc Davis' post from September 27th, above, I ran the Wireless Diagnostics when I lost internet.  Internet access came back while the diagnostics were running.  I pressed Continue and lost connection while the second was running.  Based on Airport Utility, I do not have connectivity more than I do.
    Note that Airport Utility usually shows that it can see the router, but there is no Internet access.  Other times it shows that it can not see the router. 
    Wireless Diagnostics suggested that I restart the router (a new Airport Extreme that I installed in August.)  Restarted the router did not solve anything.
    All other devices, wired and wireless, are working fine.  The affected device is the only one running 10.9.5 wirelessly.
    Any help would be greatly appreciated.

  • Can't connect to internet through WRT54G

    I can connect to the internet through DSL modem but cannot when going through the WRT54G.  All lights on router lit correctly.  Actually set up this router 6 months ago or so and worked both wired and wirelessly for awhile.  Then could only access internet wirelessly with laptop.  Started messing with the router to get it to work wired with desktop but now won't work.  Can access the router set-up page but not sure what to change.  Saw somewhere to change the routers IP address to 192.168.2.1  didn't solve the prblem.  Have tried restoring factory defaults, recommended power on/off sequences (modem, router,pc) and holding reset button for 30 seconds.  Also tried Easy connect tool on the Linksys site.  Icon in lower right of pc screen indicates status as connected but still cannot connect to internet.  Any help is very much appreciated.
    Scott

    I had the very same problem with the same model router. It turned out to be the Security setting in Internet Options. The security setting was on Medium. After changing it to Medium-Low, I could connect to the internet through the router.
    If you are not familiar with changing the Security setting, let me know and I will reply with the steps to take.
    Dale
    Shelby, NC

  • Only able to connect to internet through Broadband DSL one computer at a time.

    Hi,
    I am using Verizon Broadband DSL, and have used it for a few years.
    Equipment:
    Westell Versalink Model 327W
    Linksys Wireless-G Broadband Router Model WRT54G
    I have a desktop (running Windows XP), and 2 laptops (1 XP, 1 Vista) that are connected wirelessly. Until recently all 3 computers have been working fine, connecting to the internet on the wireless network.
    The problem is this: When any one of the computers is connected to the internet through the DSL none of the others computers is able to connect – I see the message “Connecting through WAN miniport (PPOE)…”, i.e. I am only able to connect to the internet 1 computer at a time.
    As soon as I disconnect from the ‘connected’ computer (desktop or laptop) I am immediately able to successfully connect to the internet on either of the other 2 computers.
    I’ve tried resetting everything – no luck.
    I don’t recall having changed any of the settings and am baffled.
    Any thoughts as to the problem?
    Thanks in advance for any help.
    Charlie
    PS. I haven't called the Verizon DSL Tech Support team yet...but I will soon. I figured on asking here first.
    Solved!
    Go to Solution.

    CharlieJ wrote:
    The problem is this: When any one of the computers is connected to the internet through the DSL none of the others computers is able to connect – I see the message “Connecting through WAN miniport (PPOE)…”, i.e. I am only able to connect to the internet 1 computer at a time.
    As soon as I disconnect from the ‘connected’ computer (desktop or laptop) I am immediately able to successfully connect to the internet on either of the other 2 computers.
    I’ve tried resetting everything – no luck.
    I don’t recall having changed any of the settings and am baffled.
    Any thoughts as to the problem?
    Thanks in advance for any help.
    Charlie
    PS. I haven't called the Verizon DSL Tech Support team yet...but I will soon. I figured on asking here first.
    Ok.
    #1 You must get to the network control panel on your computer.
    One of the ways, for Windows XP is:
    a) Go to Start -> Control Panel -> Network Connections
    b) The screen will look like steps 5 and 6, on http://portforward.com/networking/static-xp.htm
    For Windows Vista:
    a) Go to the globe icon (start button) -> Control Panel -> Network and Sharing Center -> Manage Network Connections.
    b) The screen will look like steps 5, 6, and 7, on
    http://portforward.com/networking/static-vista.htm
    #2 Right click on the WAN miniport (PPPOE), and remove the check mark that says Set as Default Connection.
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Have PC connect to internet through Mac with firewire and file sharing

    Hi, I have a network of 2 computers, one Mac and the another PC. The Mac is connected to the internet and the PC is connect to the Mac through firewire. I have managed to set up a file sharing system, both Mac and PC read each other without any third party applications. This is working great, however, the two computers successfully connect only when the PC is turned on first, or else the Mac will say that there is no device connected to the Firewire port. If the Mac is on, and then the PC gets turned on, I have to restart the Mac in order for the connection to be established. Is this normal? Is there a fix for this?
    I'm also interested in having internet on the PC as well. How will I be able to do this through a firewire cable?
    Thanks

    Schmerz Meister wrote:
    Say my PC's ethernet plug is damaged and all my PCI slots are taken. I won't be able to hook it up to an ethernet connection. How can I use firewire for internet?
    Run System Preferences->Sharing->Inernet Sharing->Firewire
    It's that simple.

  • Lost connection to internet through airport

    My Mac at home is configured to a timecapsule and connected through airport wifi. The Time capsule is connected via cable to modem and out via cable to Internet. Up until today everything is fine. started up and i have lost connection to the internet.
    Network Preferences is showing that Airport has a self asssigned IP address and cannot connect to internet. The time capsule lights are showing green, as do the Modem, neither are reporting problems.
    I have tried all of the "first Aid configurations" i.e. switch off/on etc, also tried a couple of ideas from forums, nothing works. I can connect the Mac directly to the modem via cable and access the internet.
    As an aside, My iphone has also lost connectivity through home wifi.
    It would appear from other forums that this is a growing problem, however not much in the way of resolution. Any Ideas????

    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations: Automatic
    Highlight Airport
    Click the Assist Me button
    In the pop up window click the Diagnostic button.
    System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
    Mac OS: How to release and renew a DHCP lease
    *No internet connection (wireless)*
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."

  • Not connected to internet through airport xtreme (connection is ok) after upgrading iOS6

    after upgrading to iOS6 none of my mobile devices (running iOS6) can go online on internet through my airport extreme. My MAC is using the same without problem.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't connect to internet through netgear95 router

    Can't connect to the internet through a netgear95 router.  my PC connects to internet ok, none of my apple stuff (iphone/ ipad) will connect though.  Must be something in settings on router.
    Scott

    Hi Scott,
    Do you have any Wireless devices that connect to the router? I'm assuming that your PC may connect via Ethernet cable?
    Regards
    Steve

  • Can't connect to internet through airport extreme but have full signal

    I've seen a lot of posts but I still can't connect wirelessly via airport extreme.
    Using a Powerbook running 10.6.4, I have updated the airport extreme's firmware and have a full signal strength, but I can't connect to the internet.
    I get an error message that it can't find the server.
    I can get online if I connect the internet cable directly to my computer.
    so..
    Airport is working
    Internet is working
    Wireless is not working
    suggestions?

    Robin Berman wrote:
    I still can't connect wirelessly via airport extreme.
    Using a Powerbook running 10.6.4
    That's not possible. Do you mean "MacBook"?
    I ... have a full signal strength, but I can't connect to the internet.
    First try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
    If that doesn't help, connect to your wireless network, then open the Network panel of System Preferences. Select the AirPort connection item, click on the "Advanced" button, then on the "TCP/IP" tab. What do you see for the three values below "Configure IPv4"? Now click on the "DNS" tab. What do you see for "DNS Servers"?
    Finally, type this URL in the address bar of your browser:
    http://74.125.157.99/
    and press "return". Does that take you to Google? If so, there's something wrong with the way your computer or router is handling DNS lookups.

  • Can't connect to internet through Airport Express anymore

    Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
    Thing is, Airport/wireless is working. Can stream audio to my home stereo.
    And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
    Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
    What gives?
    Any ideas?

    Hello mnkyby. Welcome to the Apple Discussions!
    It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
    Try this ...
    o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
    o Go to the Internet tab.
    o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
    o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
    If the latter, try the following ...
    Modem/Router Power Recycling - Quick
    o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
    o Power-on the DSL/Cable modem; Wait at least 5 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the DSL/Cable modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)

Maybe you are looking for