How to parse 10 byte encoded data from Omegatte HH306 Thermometer/Datalogger?

I am trying to write a simple code for an OMEGAETTE HH306 Thermometer/Datalogger from omega.com.
Here is the problem. I communicate with the device via RS-232, using Labview 8.5.1 and windows xp. I query it for "all encoded data", which is basically the only option. It returns 10 bytes of encoded data, the manual describes the meaning of each byte, and I understand all of it. The problem is that I cannot seem to parse the information for use within labview, for example: I want to extract the temperature and simply display it.
upon query, I get: 10bytes (read as a string from the serial port read buffer): HEX display: 02 00 A8 B6 48 FF EF B6 49 03 This is perfect, and what I expect. Codes Display: \02\00\A8\B6H\FF\EF\B6I\03 The Normal Display is a series of special characters, which I don't understand, especially since I don't think they represent the ascii characters that should correspond to the hex numbers returned! For the life of me, I cannot figure out how to extract the information (which is the 6 48 in the hex display) from what is returned. All the string manipulation functions seem to only work on what is given in the Normal Display. (The 4th and 5th byte of the data are the BCD codes for the temperature: for example the temperature was 64.8 degrees farenheight when I took this reading).
Can anyone help me to parse the data returned by this device?
Solved!
Go to Solution.

Ok... I think I figured it out. I found this: http://digital.ni.com/public.nsf/websearch/77C8F61D36F5A23086256634005ACB38?OpenDocument.
I guess the garbled normal display is the ascii characters corresponding to each hex number. I am just not used to seeing ascii characters beyond the decimal number 127, or hex 7F.
So basically, to parse the 10 bytes of data:
1) break up the string read from the serial port into the 10 individual ascii characters (using String subset vi)
2) wire each output string into the left input of 10 distinct Type Cast vi's.
3) wire a U8 constant into each "type" terminal of the Type Cast vi's.
4) wire the string output of each Type Cast vi into the input of a number to hexadecimal string vi.
5) concatenate or use as you would like the hex numbers (now in string format) that result.
Cheers.

Similar Messages

How do u get the data from server? if server send by bytes?

how do u get the data from server? if server send by bytes?
i have tried using bufferedinputstream to get the data n getting the bytes but there is some data missing.i couldnt all data.so my image cant be display

If you don't get helpful replies, I suggest you try to improve your question style a bit. There are many non native English speakers around here and the ability to phrase slick sentences varies. But for a start you could try to adhere to minimal English language standards like starting a sentence with an uppercase letter, and ending a sentence with a dot and a blank to separate it from the next sentence. Don't use ellipses (...) all over the place suggesting that the reader knows what you want to say. Rather please say it.
Its is good style to only post the necessary code to understand the problem. However, the code you posted seems to be cut off too early to even get a grasp at what you are trying to achieve.
Harald.
BioMed Information Extraction: http://www.ebi.ac.uk/Rebholz-srv/whatizit

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

How to parse thus XML data?

Hi,experts:
In below thread:
Receiving .Net dataset with deployed proxies
i asked how to create a external definition in IR base on above XML data.
Now,i have created a XSD file base on the XML data.And importing it into IR successfully.
<?xml version="1.0" encoding="utf-8"?>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:Locale="zh-CN">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="Status">
<xs:complexType>
<xs:attribute name="Result" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
And now,the question is how to parse the XML data in diffgr:diffgram segment.It seems a MS-XML syntax.Can it be parsed by XI?
I tried,but the following error occurs:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:ZMT_SD_ORDER01_RESULT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start

Hi,
The above Exception seems to be because of mapping error.
Check your mapping for all the mandatory 1-1 mapping, also the 1-unbounded parent node mapping.
Once when you import the XSD and activate your External Definition if it does without any error then there is no problem with your External Definition.
If this error occurs only when you test your mapping then this is mapping error and not because of XSD.
Please check the parent node mapping like 1-unbounded.
Reward Points if useful
Regards
Ashmi.

Get the Encoder Data from NI Robotics Starter Kit 1.0

I want to make a perfect 90 degree turn using the encoder Data from Robotics Starter Kit 1.0. Now I am doing it giving the angular velocity and controlling the time. But, the problem is, it's not perfect all the time. It is not repeatable. So, I want to use the encoder Data to turn it 90 degrees perfectly. So, How could I get the Quadrate Encoder Data from the motors (What VI should be used?).

Hey Mashfique,
Sorry for the delayed response. I believe that with the Robotics Starter Kit 1.0 you aren't actually suppose to worry about which of the FPGA I/O correspond to which sensor because the Robotics VIs abstract that for you by design. Here's a link that you might find interesting that describes how to communicate with the FPGA to steer a robot using either the Servo's angular position or velocity:
http://zone.ni.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_skit_programming/#skit_steering
In the above link for example, they mention using the Write Sensor Servo Angle VI to set the angle that you want to rotate the Servo to.
Regards,
Ryan

After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.

Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

I have hierarchy data in R/3 side how will i load that data from R/3 to BW

Hi all,
i have my hierarchy data in the R/3 side how will i load that data from R/3 to BW side
Regard
Kiran Kumar

Hi Kiran,
Here is the procedure:
1.      In the Data Warehousing Workbench under Modeling, select the InfoSource tree.
2.      Select the InfoSource (with direct update) for the InfoObject, to which you want to load the hierarchy.
3.      Choose Additional Functions® Create Transfer Rules from the context menu of the hierarchy table object for the InfoObject. The Assign Source System dialog box appears.
4.      Select the source system from which the hierarchy is to be loaded. The InfoSource maintenance screen appears.
○       If the DataSource only supports the transfer method IDoc, then only the transfer structure is displayed (tab page DataSource/Transfer Structure).
○       If the DataSource also supports transfer method PSA, you can maintain the transfer rules (tab page Transfer Rules).
If it is possible and useful, we recommend that you use the transfer method PSA and set the indicator Expand Leaf Values and Node InfoObjects. You can then also load hierarchies with characteristics whose node name has a length >32.
5.      Save your entries and go back. The InfoSource tree for the Data Warehousing Workbench is displayed.
6.      Choose Create InfoPackage from the context menu (see Maintaining InfoPackages). The Create InfoPackage dialog box appears.
7.      Enter the description for the InfoPackage. Select the DataSource (data element Hierarchies) that you require and confirm your entries.
8.      On the Tab Page: Hierarchy Selection, select the hierarchy that you want to load into your BI system.
Specify if the hierarchy should be automatically activated after loading or be marked for activation.
Select an update method (Full Update, Insert Subtree, Update Subtree).
If you want to load a hierarchy from an external system with BAPI functionality, make BAPI-specific restrictions, if necessary.
9.      If you want to load a hierarchy from a flat file, maintain the tab page: external data.
10.      Maintain the tab page: processing.
11.      Maintain the tab page: updating.
12.      To schedule the InfoPackage, you have the following options:
○       (Manually) in the scheduler, see Scheduling InfoPackages
○       (Automatically) using a process chain (see Loading Hierarchies Using a Process Chain)
When you upload hierarchies, the system carries out a consistency check, making sure that the hierarchy structure is correct. Error messages are logged in the Monitor. You can get technical details about the error and how to correct it in the long text for the respective message.
For more info visit this help pages on SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
Cheers,
Habeeb

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

How can I remove safari data from shared iCloud account?

Before iOS 8 and family sharing I was using a single iCloud account shared among several Apple devices in my household. Now that we are all using our own separate Apple Accounts I want to delete shared data from other devices that were using my iCloud account. For example, my wife and I both have data synched with iCloud (the same account) for Safari. Now that her phone has been switched over to her own AppleID, I want to purge the data stored in my icloud account from her device. When I open Safari on my phone, I can see a list at the bottom of tabs that my wife had open on her phone at one time in the past. That list will never get updated now that she is using her own account. So how do I purge old data from other devices off my iCloud account?

If she's on a different account now, Safari data from the previous account should no longer be on her device. iCloud tabs, on the other hand, will persist from a device that is no longer sharing the account for 14 days, after which they are automatically cleared. (This is coming from iCloud, not from her device.) You might try waiting a couple of weeks and see if they aren't automatically removed.
If you're still concerned, you could always ask her to go to Settings>Safari and tap Clear History and Website Data. This won't clear her iCloud tabs from your device though; you'll have to wait for that.

How can i get the data from database & add them as a link

Hi,
how can i get a data from a database(DB2) and that data will be having a file so i should make them as a link.i tried it in jsp .
<%
Class.forName("COM.ibm.db2.jdbc.app.DB2Driver");
Class.forName("COM.ibm.db2.jdbc.net.DB2Driver");
response.setContentType("text/html");
Connection conn = null;
conn = DriverManager.getConnection("jdbc:db2:spintran");
Statement stmt = conn.createStatement();
stmt.executeQuery("set current schema tut");
ResultSet rs = stmt.executeQuery("select * from tutorial");
%>
Type Of the Category : &nbsp&nbsp&nbsp
<%
     while (rs.next())
     String desc = rs.getString(1);
     out.println(desc);
%>
     <A HREF = "<%=desc%>"><%=desc%> </A>
     <%
     %>
but it is not working.how can i link.
thank you.

what is desc? is it the file name ? whats the data type of desc in db? INFILE?
if desc is just the name of the file, then make sure that such a file exists in the proper folder.only then the link works..
that is, if desc is 'a.jpg' then a.jpg should be existing in the same folder as your html is.

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How to recover the autocomplete data from a Time Machine backup?

How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
To solve other issues (Safari crashing sometimes when saving web pages), I selected:
Safari - Empty Cache
Safari - Reset Safari - Selected ALL - Reset
I could later on recover some Safari autofill data restoring
HD/Users/~/Library/Cookies/Cookies.plist
HD/Users/~/Library/Safari/Form Values
HD/Users/~/Library/Safari/History.plist
but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
How to restore all such data from the Time Machine Backup?
Thanks!

I also recovered:
HD//Users/~/Library/Keychains/login.keychain
What else should I recover?

How to parse 10 byte encoded data from Omegatte HH306 Thermometer/Datalogger?

Similar Messages

Maybe you are looking for