How to pass a table of values as input to a BAPI

I have a BAPI that is expecting a table as an input. How do I do that in Visual Composer 7.1.
I am getting an error when I try to pass the multiple selected rows from a table.
com.sap.mw.jco.JCO$Exception: (127) JCO_ERROR_FIELD_NOT_FOUND: Field null not a member of
Please advise
Thanks

Hi,
It sounds like a mapping problem. Just to make sure, check that all the table fields are mapped correctly (check them in the dynamic expression editor).
Also, make sure that all the fields from the table are selected and mapped at the BAPI input. If there are fields you don't want to pass, you can pass =null to them.
Best regards,
Tal.

Similar Messages

How to pass internal table values to parameter

hi,
         how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.

hi,
tables : mara.
data : begin of itab_mara occurs 0,
          matnr like mara-matnr,
          ernam like mara-ernam,
          end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
                                                                where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
           itab_mara-ernam.
endloop.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Is it possible to pass table type values as input parameter for con prg?

Hi All,
Could you please confirm that is it possible to pass table type value as input to concurrent program?
If possible how to achive this?
If not possible whether we have any ora doc which is confirming this.
Any hel will be great.
Thanks,

Hi student;
Please check (http://apps2fusion.com/at/45-as/241-enablingdisabling-concurrent-program-parameters)
Hope it helps
Regard
Helios

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

How to pass internal table to method of class

Hi all,
I am new to abap objects, i want to pass one internal table to class.
i am trying in this way.
class c1 definition.
method get_material importing t_stpo type any table
                               exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
        for all entries in t_stpo
        where stlnr = t_stpo-stlnr.
endmethod.
endclass.
ERROR:
"stlnr" is not available
if i use this way. its not giing error.
class c1 definition.
method get_material exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
        for all entries in it_stpo
        where stlnr = it_stpo-stlnr.
endmethod.
endclass.
how to pass internal table with some specific reference may be using like or type <it_xxxx>
thanks

Try this.
TYPES : BEGIN OF ty_stpo,
         stlnr TYPE stpo-stlnr,
         idnrk TYPE stpo-idnrk,
         menge TYPE stpo-menge,
        END OF ty_stpo,
        BEGIN OF ty_mast,
         matnr TYPE mast-matnr,
         werks TYPE mast-werks,
         stlnr TYPE mast-stlnr,
        END OF ty_mast,
        tt_stpo TYPE TABLE OF ty_stpo,
        tt_mast TYPE TABLE OF ty_mast.
DATA : it_stpo TYPE tt_stpo,
       it_mast TYPE tt_mast.
*       CLASS c1 DEFINITION
CLASS c1 DEFINITION.
PUBLIC SECTION.
    METHODS : get_bom_numbers EXPORTING ex_stpo type tt_stpo,
              get_parent_material IMPORTING im_stpo TYPE tt_stpo
                                  EXPORTING ex_mast TYPE tt_mast.
    endclass.
*       CLASS c1 IMPLEMENTATION
CLASS c1 IMPLEMENTATION.
METHOD get_bom_numbers.
ENDMETHOD.                    "get_bom_numbers
METHOD get_parent_material.
ENDMETHOD.                    "get_parent_material
START-OF-SELECTION.
DATA : obj TYPE REF TO c1.
CREATE OBJECT obj.
CALL METHOD obj->get_bom_numbers
    IMPORTING
      t_stpo = it_stpo.
CALL METHOD obj->get_parent_material
    EXPORTING
      im_stpo = it_stpo
    IMPORTING
      ex_mast = it_mast.
Regards,
Rich Heilman

How to pass dynamically table name in my cursor declaration

Hi:
I am new. could you please let me know how to pass a table name dynamically in my cursor declaration? for instance I am declaring the following cursor in my pl/sql procedure:
CURSOR crs_validate IS
select * FROM <ACT_JUN_2006_LOB>;
this ACT_JUN_2006_LOB table name, I should able to pass it when I open the cursor ... any help appreciated. thanks.
srini

Thanks all for the response. REFCURSOR does work: here is an example ... which I found on-line
procedure emp_test(
month varchar2,
year varchar2)
is
type cur_typ is ref cursor;
c cur_typ;
query_str varchar2(200);
emp_number number := 7900;
salary number;
name varchar2(30);
Begin
query_str := 'Select empno, ename, sal from emp_' || month ||'_'||year
|| ' where empno = :id';
open c for query_str using emp_number;
loop
fetch c into emp_number, name, salary;
exit when c%notfound;
dbms_output.put_line(emp_number);
end loop;
close c;
end;

How to pass the FORM Fields value by Form Personalization

Hi ALL,
I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
can any one suggest what to do???
i tried with these syntax
TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
Regards
Ravi

Hi,
Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
Regards,,
Anil.

State machine custom task workflow how to pass one task field value to the next task field

i am using ItemMetadata.xml to pass value from list to custom task first value its passing the but second value is showing as null
plus how to pass one custom task value to the next custom task
i.e one supervisor approver comments submitted field i want to see on department manager approval custom task which is the next approver from supervisor
ows_firstfield=""
ows_SecondField=""
the above ows fields are from list
in this i am unable to retrive the second value in the task form this is my first query?
second query is that how can we pass one task field value to next approver task field value?
any idea
MCTS,ITIL

What type of workflow is this? IS this Visual Studio or SharePOint designer or third party (K2, Nintex, etc...)? YOu should be able to get ahold of the task that was edited via the correlation token, and then grab any value you want from that
task (wether it be a custom field or a standard worfklow task field).
It would help to know what you are using to build the workflow.
Thanks!

Table Parameter Values Are Input To RFC?

Hi,
My Requirement is Table Parameter Values are Input RFC.
We have Table Parameter With Project ID Column and Multiple Rows.
User Need To Enter Project id's in Table And Submit.The Result can be displayed.
In My Scenario User Need to enter the values in table.
I Developed Webdynpro Application and Deployed.
When i am trying to enter values into a table,table is not taking values.
Because in My Requirment is the user enter morethan one project id in table.
Thanks
SubbaRao Chinta

Hi,
Can you please explain more clearly that what is the meaning of "Table not taking values"?
Did you take the ColumnCellEditor(inputfield) for table column as input field.
For example, You need to create a value node as below
ProjectIdsNode (Value node with cardinality 0..n & selection 0...n)
---> ProjectId (Attribute)
And bind this ProjectIds node to table UI element. And bind ProjectId attribute to ColumnCellEditors(inputfield) value property.
Now in submit action loop though this node and get all the values entered in ProjectId attribute.
And set all these values into input of your RFC while executing to store in backend.
Regards,
Charan

WebDynpro - How to pass a single field value to BAPI table?

Hello,
I have just come from WebDynpro ABAP training and being a novice hit my first issue right away.
I need to use BAPI - BAPI_CONTRACT_CREATEFROMDATA to create SD contract (I have used this BAPI to create a service call inside Webdynpro). I have two required fields: contract start and end dates. These fields passed in a table called CONTRACT_DATA_IN.
When I use the fields from the structures or individual fields, all I need to do is just put them on the view, and when I hit my submit button they will be passed to the BAPI. They are a part of COMPONENTCONTROLLER context (I have also mapped them in View context), but tables are obviously different.
Is there any way to pass data to tables as seamlessly without any code as for structures? Or do I need to write code to get the values from the input fields and then populate the table manually?
Thanks,
Alex

Hi,
Single customer contract creation use the struture-
If you want to pass only one record then using the input fields for those 2 fields we can pass them to BAPI and then create the Customer Contract. This will work for only one record of customer contract.
then we can directly read these input fields and pass to BAPI.
Creating many customer contracts -
For example, If you want to provide the group of records at a time and then you want to create the cusotmer contracts for so many records then you fill these fields and pass them to table then pass this table to the tables parameters of that BAPI.
Here we need not create the Table UI element separate input fields would serve the purpose.
Now we can create the batch of contracts for N customers.
these input fields of a customer will be passed to table, then next set of input fields etc.
For this create the Table UI element and fill all the records and then pass it to the Tables of the BAPI.
Regards
Lekha

How to pass internal table between views

Hello Experts,
How to pass an internal table between views? I have followed some steps but its showing an error.
i have created a table type of ZTTYPE_VBAP and line type VBAP.
I have declared in component controllers attribute LT_VBAP of associated type ZTTYPE_VBAP .
But when i am using this in my method in component controller its not taking.

Venkata123# wrote:
Hello Experts,
>
> How to pass an internal table between views? I have followed some steps but its showing an error.
>
> i have created a table type of ZTTYPE_VBAP and line type VBAP.
> I have declared in component controllers attribute LT_VBAP of associated type ZTTYPE_VBAP .
> But when i am using this in my method in component controller its not taking.
you will have to declare a node with the attributes in the context tab of component controller. by doing this you will make this node a global one in your entire application . now copy the value you have in the internal table of yours in this node.
after doing so you can read this node anywhere in the program and you can retrieve the values.
regards,
sahai.s

How to pass tag name and value dynamically in the output of PCo notification?

Hi,
I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
Thanks in advance.
Regards,
Suman

Hi Suman/Jeedesh,
As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
For above issue, My suggestion
1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
4. And in the mean time, send those Tag details vie mail trigger or as per requirement
Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
Hope it might solve your problem
Regards,
Praveen Reddy

How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

How to pass internal table to form routine..?

Gurus,
I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
DATA: Begin of tb_set_values occurs 0.
        include structure rgsb4.
DATA: End of tb_set_values.
PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
                           CHANGING rtb_set_values LIKE tb_set_values[].
DATA: v_setid TYPE setid.
*DATA: Begin of rtb_set_values occurs 0.
     include structure rgsb4.
*DATA: End of rtb_set_values.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
    EXPORTING
      SHORTNAME = rwa_setheader-setname
    IMPORTING
      NEW_SETID = v_setid.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
    EXPORTING
      SETNR      = v_setid
    TABLES
      SET_VALUES = rtb_set_values.
ENDFORM.
What can be the error..please help

Well actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
REPORT rich_0001.
DATA: setheader TYPE string.
DATA: wa_setheader TYPE string.
DATA: BEGIN OF tb_set_values OCCURS 0.
        INCLUDE STRUCTURE t000. "<<-- Test with T000 instead    "rgsb4.
DATA: END OF tb_set_values.
SELECT * INTO TABLE tb_set_values FROM t000.
PERFORM read_sets_with_values USING wa_setheader
                              CHANGING tb_set_values[].
*&      Form read_sets_with_values
*       text
*      -->VALUE(RWA_SETHEADER) text
*      -->RTB_SET_VALUES        text
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
                           CHANGING rtb_set_values LIKE tb_set_values[].
DATA: ls_set_values LIKE LINE OF rtb_set_values.
LOOP AT rtb_set_values INTO ls_set_values.
    WRITE:/ ls_set_values.
ENDLOOP.
ENDFORM.                    "read_sets_with_values
Regards,
RIch Heilman

How to pass a table of data to transaction.

Hi,
I need to pass several rows of data to an internal table of a bapi from a page .
I know how to create a table in xMII transaction within itself.
But I couldn't figure how to pass several rows from a HTML page to an input parameter of a Xacute query.
Here is the scenario.
My HTML page is having a table of 3 rows and 12 columns.
I need to pass this data to an input parameter of a Xacute query.
Can some one help me in this regard.
Thanks,
Srinivas.

Rick,
Thank you very much Rick. Your work around is working fine.
I am trying to enhace it a little bit this concept as below.
I created a transaction which takes string input through transaction parameters and impliments your logic of saving to a local text file and loads as XML data through XML loader and finally assigning to OUTPUT parameter of xml type.
Through this I can call this transaction where ever I need to convert string to XML.
But the problen I am facing here is whenI test this transaction through Xacute Query with some well formed XML data as input I am getting nothing in the test page.
Here are the steps I followed in the transaction:
1. Save the input text to a local file.
2. Load the same file using XML Loader.
3. Assign the xmlLoader.xmlContent -> Transaction.OUTPUT ( Assign XML) through assignment block.
4. Delete the temporary file.
Can you help in this regard.
Thanks,
Srinivas.
Thanks,

How to pass a table of values as input to a BAPI

Similar Messages

Maybe you are looking for