How to pass data from smartform to user exits in appl form print workbench

Dear All,
I am using print workbench + smartforms to develop a form.
But facing problem with passing data from the smartform back to
the user exits includes in the application form of the print workbench.
For eg:- Supppose the case , passing the total number of pages 'sfsy-formapages' to the application form .
I tried with the export interface of the smartform, still it doesn't works!
Any suggestions/solutions
Thanks
santhv

Hi Prashanti,
Thank you very much...
Using EXPORT/IMPORT , I am able to pass the data.
But I would like to know whether it is the final solution.
As there is export interface is available for smartform....
why it is not possible to get back the data in Application form.
Please confirm, so that I can close the post.
Anyway thank you once again....
Regards,
santhv

Similar Messages

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

How to pass data from list to internal table

Sir,
Please tell me how to pass data from list display to internal table. Some fields in the list display are input fields .These are added at run time and these added values should be stored in the internal table

Follow this code sample:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_CALLBACK_PROGRAM                = W_REPID
    I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
                        P_SELFLD TYPE SLIS_SELFIELD.
case p_ucomm.
when '<Some user Action>'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data
* Your internal table will have the data
endcase.
ENDFORM.
Regards,
Ravi

How to pass Data from one form to the other

Hi all
Can any one suggest me how to pass data from one form to the other form, which i zoomed from the original one?
I tried to do this by passing parameter in Event Procedure but i am getting error msg when i am opening the zoomed form.
If any one of u have any idea, give me a reply
Thank you
Suhasini

If you choose the second alternative you should erase these global variables after the second form is opened
You can erase the global variable using:
erase('global_var')
Greetings,
Sim

How to pass data from offline form to webdynpro java

Hi,
Please suggest me how to pass data from offline from to webdynpro java node?
i am using the below code to pass data from offline form(after entering values in the form) to node . i am using form upload ui element to upload offline form and after that i am providng a button to update data.But still i am not able to see data in the node.Any suggestions on this.below code is wriiten on action of the button.
wdContext.currentContextElement().setPDFSource(null);
       try
            if(null!=wdContext.currentContextElement().getAttributePointer("Resource"))
       IWDResource fileResource = wdContext.currentContextElement().getResource();
     if("PDF".equalsIgnoreCase(fileResource.getResourceType().getFileExtension()))
       byte[] b = new byte[wdContext.currentContextElement().getResource().read(false).available()];
       wdContext.currentContextElement().getResource().read(false).read(b)                     wdContext.currentContextElement().setPDFSource(b);
       WDInteractiveFormHelper.transferPDFDataIntoContext                 (wdContext.currentContextElement().getPDFSource(), wdContext.nodeVn_TestData());
                 else
                      wdComponentAPI.getMessageManager().reportException("Please enter correct file");
            else
                 wdComponentAPI.getMessageManager().reportException("Error while uploading file");
       catch (Exception e) {
            wdComponentAPI.getMessageManager().reportException
            ("Error in uploading the Adobe Form :"+e.getLocalizedMessage(),false);
Regards,
Pavani

If you choose the second alternative you should erase these global variables after the second form is opened
You can erase the global variable using:
erase('global_var')
Greetings,
Sim

How to pass data from a C++ program to LV to plot the data real time?

Hello,
I am writing a C++ program in which I need to plot the data in real
time. I would like to pass data from my C++ program to LabView in order
to perfrom the plotting. I was wondering if this is possible. If so,
how can it be done? .
Thank You

There are several C++ examples and application notes here.

How to pass data from one component to other component.

Hi,
I have created a table view in Item Details Page Under Price Agreement Assignment Block. Price Agreement Assignment Block has one table as standard. I have created one more view Under the Assignment block of Price agreement(CRMCMP_CND). In that view I have an option to enter data when the user click on edit. In that custom view, If user cnages to edit mode and enter data. it has to save when user click's on save button in Quotation page(BT116QH_SRVQ). From Quotation page user clicks on item to get the Item details. In the Item details there is an Price Agreement Assignment Block. In that Custom view was created and assigned to it. Data entred in that view needs to be stored when user clciks on Save button on Quotation page when he comes back. How to get the custom view data from CRMCMP_CND to BT116QH_SRVQ). Please advice. Thanks In Advance.

Hi Satish,
Global custom controllers are not available everywhere. So before using them please make sure that they are available for your case.
http://sapdiary.com/index.php?option=com_content&view=article&id=2402:sap-network-blog-interaction-center-global-custom-controllers&catid=81:data-services&Itemid=81
if you find problems in navigating data using component controllers then you can also navigate it through navigation links.
If you see your outbound plug method op_xxxxx, then there is a method call to navigate method. This method has an option to pass your data collection. Pass your data collection and also inbound plug so that in target component you can read and temporarily store data as soon as you hit target component.
Hope that helps,
BJ

How to pass data from one UIBB to anothere UIBB in OIF/GAF - FPM

Dear all,
as of now i am using FPM only for displaying data from different components.
now i would like to pass the data from one UIBB to another by calling second UIBB on action of a button. (instead of using standard path in GAF scenario)
how could i achieve this. is there any difference mechanism's for UIBB's of single component and UIBB's from different different components.
it would be great if some one can explain or help me reg this issue on both OIF and GAF FPM's.
Thanks in Advance.
Best Regards,
Kranthi kumar Palle.

I've actually combined these two approaches to data sharing - I've passed a class reference in the shared data component. This is nice (in my opinion) because it is very obvious where the data is coming from and who it is shared with. It also means that there is not a huge overhead in passing data through the shared context, because you are just replicating a reference to a class instance.
And - you don't have to deal with singleton classes :-). So if you want/need to extend your implementation at a later date (for example embedding multiple instances of the same "app" in the one window - or suspending and resuming to another instance of the same app you can then do this. (NB - suspend resume to launch another FPM app does not work because of this (amongst other things)).
NB a shared data component need not be faceless! I certainly have "shared data" UIBBs that also have UI components - possibly not best practice - but it certainly can be done.
Cheers,
Chris

How to pass data from one session to another?

What does SAP memory use to pass data between sessions?
What is the syntax of "Export to ..."? Where is it used?

hi suman vijay,
EXPORT obj1 ... objn TO MEMORY.
Exports the objects obj1 ... objn (fields, structures or tables) as a data
cluster to ABAP/4 memory .
EXPORT obj1 ... objn TO DATABASE dbtab(ar) ID key. Exports the objects obj1 ... objn (fields, structures or tables) as a data cluster to the database table dbtab.
IMPORT f itab FROM MEMORY.
Imports data objects (fields or tables) from the ABAP/4 memory . Reads in all data without an ID that was exported to memory with "EXPORT ... TO MEMORY."
IMPORT f itab FROM DATABASE dbtab(ar) ID key. imports data objects (fields, field strings or internal tables) with the ID key from the area ar of the database dbtab .
EXPORT obj1 ... objn TO MEMORY.
If you call a transaction, report or dialog module (with CALL TRANSACTION , SUBMIT or CALL DIALOG ), the contents of ABAP/4 memory are retained, even across several levels. The called transaction can then retrieve the data from there using IMPORT ... FROM MEMORY .
Each new EXPORT ... TO MEMORY statement overwrites any old data, so no data is appended.
EXPORT obj1 ... objn TO DATABASE dbtab(ar) ID key
The database table dbtab must have a standardized structure .
The database table dbtab is divided into different logically related areas ( ar , 2-character name).
You can export collections of data objects (known as data clusters ) under a freely definable key (field key ) to an area of this database.
IMPORT allows you to import individual data objects from this cluster.
thanks
Sachin

How to pass data from one component to another

Hi all,
We have added a button on "ICCMP_BTSHEAD" component, which will open a new popup component (Zcomponent), which will have some fields related to the order. Can anyone please tell us how to pass the ticket/ entity value to the new component so that it can be used there. Any pointers will be highly appreciated. Thanks.
Rgda,
@run

Hi Arun,
I have the same issue. I added the Follow-up(hyperlink) button in the Sales order. How can i get the view from the Interaction record follow-up by clicking on hyperlink in Sales order. Please help me.
Regards,
Swaraj

How to pass data from main vi/exe (sender) to many vi/exe (receivers) with one receiver code/vi?

Hello all
I am tring to dev some data distribution system, where one vi gets data from hw to shared variable. Vi compiled to app "sender.exe" The others units (receivers) should receive that data from shared var and write it to different serial ports (configured by user in runtime via control). Number of actually working ports may vary.
Should (and can?) this "receivers" vi's be the one vi, compiled to app "receiver.exe" and executed many times with different settings (diff serial port number)? // I tried this, second+ execution of receiver.exe just makes existing window active instead of creating new process as it works with other languages.
Or should i build many different vi (receiver1, receiver2, ... with actually the same content) into different .exe to run them at the same time?
Or may be the best way to build multi-port receiver with ability to communicate with any number of serial ports? // i dont like this, no code reusage here ))
The question is complicated with possibility to work via network (one of the reasons to make different exe for receivers) and may be the shared vi namespace may not allow many receiver-side vi's to have the same name?
In short, it should work as SENDER.exe >> RECEIVER1.exe, 2, 3... i.e. "one to many".
Asking for a best solution advice.
Please help)

ns_create wrote:
Should (and can?) this "receivers" vi's be the one vi, compiled to app "receiver.exe" and executed many times with different settings (diff serial port number)? // I tried this, second+ execution of receiver.exe just makes existing window active instead of creating new process as it works with other languages.
To allow multiple instances of the same exe, read this.
(I don't fully understand your setup, so I won't comment further at this time.)
LabVIEW Champion . Do more with less code and in less time .

How to pass data from external Actionscript file to MXML file

HI...
I do not know about the Application.application.whateverFieldIWantToReference and it does work on my computer, but only when the external .as file is in the same folder as the main .mxml application... But in my case, the .as file is in another folder (ie. package)...
Also i want to know When I use the standard Application.application way, it does not spit out any error, but it just doesn't work either.
Alternatively, I guess I could pass the field (in this case, a TextArea) as an argument, but how do I do that? How to pass a TextArea(or any other element, for that matter) as an argument? What type is it?
Does anybody know how to circumvent this? Any help is appreciated,
Thanks.

HI...
I do not know about the Application.application.whateverFieldIWantToReference and it does work on my computer, but only when the external .as file is in the same folder as the main .mxml application... But in my case, the .as file is in another folder (ie. package)...
Also i want to know When I use the standard Application.application way, it does not spit out any error, but it just doesn't work either.
Alternatively, I guess I could pass the field (in this case, a TextArea) as an argument, but how do I do that? How to pass a TextArea(or any other element, for that matter) as an argument? What type is it?
Does anybody know how to circumvent this? Any help is appreciated,
Thanks.

How to pass in GR qty in user exit (EXIT_SAPLEINR_003)

Hi,
How to pass in GR qty MIGO transaction (ERFMG field) into user exit EXIT_SAPLEINR_003?
thanks..
Lina

Hi Mayank,
Thanks for your response, but I don't think it corresponds to my problem.
I my case, I use a user exit variable to filter some data. It seems BPS offers the possibility to the user to select several values amongts the pre-selected values presented by the user exit variable, but it doesn't work. We can use a popup in which we enters the required values, but in final, only the first value is taken into account.
I don't know if it is due to a BPS bug or if it is not a good solution in regard to BPS philosophy. In this case, the concerned caracteristic isn't in the header but in lead columns.
I must present a solution to my client next monday, so I have not enough time to open an OSS message.
An alternate solution should be interesting too.
My need is to present to a user a selection of values amongst all values from an infoobject (the user exit variable seemed to be a good solution) and the user must have the possibility to select some values amongst these as filter.
Regards

How to Send Values from READ_TEXT   to   User exit

Hi Friends.,
                   I need to Read Values from READ_TEXT FM and send those values to User exit ( Exit_SAPLRSAP_001 for   ZSALES_2LIS_11_VAITM ) Datasource,
I'm Getting one Indicator value ( values are like   Y N 0 ) from READ_TEXT FM
and i have to make use of this in Extraction Part
can anyone help me out in ABAP coding to get these values from READ_TEXT FM to User exit
Regards
Sridhar.

Hi,
if you open the FM in se37,you will find the 'Function module documentation' button. click on it and try to see what this function module is about.
i am attaching a sample code to read the text of a penalty inforamion field.
DATA: T_LINE_T LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA: S_THEAD LIKE THEAD.
DATA: T_LINE_H LIKE T_LINE_T OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
          EXPORTING
            CLIENT                        = SY-MANDT
            ID                            = 'K01'     "Valid values for the text ID are defined in table TTXID.
            LANGUAGE                      = SY-LANGU
            NAME                          = LV_SO     "here i am passing Sales order no
            OBJECT                        = 'EKPO'    "The text object is part of the text key and assigns the text module to a specific application object. Valid text objects are defined in table TTXOB.
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
         IMPORTING
           HEADER                         = S_THEAD
          TABLES
            LINES                         = T_LINE_T
         EXCEPTIONS
           ID                            = 1
           LANGUAGE                      = 2
           NAME                          = 3
           NOT_FOUND                     = 4
           OBJECT                        = 5
           REFERENCE_CHECK               = 6
           WRONG_ACCESS_TO_ARCHIVE       = 7
           OTHERS                        = 8
        IF SY-SUBRC = 0.
          READ TABLE T_LINE_T INTO T_LINE_H INDEX 1.
Storing the value in the structure.
          E_T_DATA-PENALTY = T_Line_H-TDLINE.
        ENDIF.
Thanks.

How to pass data from smartform to user exits in appl form print workbench

Similar Messages

Maybe you are looking for