How to pass Default value of a cell in to input control

Hello Guys,
We have a WEBI which has a floating cell and populated as Today's Date everyday when user runs it. Now user wants little modification and wants Input control for Date. He also wants to pass on the values selected in input control to that floating cell. How can I do that?
Any suggestions?
Regards
Aj

Hi nitya,
I think u didnot get my requirement.
my requirement is i have an complete editable ALV with all fields as input fields.
now when i enter a value under material and press enter i need to capyure the
material value and based on the material value i need to get the details and populate all those values in the respective fields.
All i need to do is get the material number that is entered.
in the pdf of using ALV events it is such that editable cell editors trigger ON_DATA_CHANGED event and non-editable cell editors trigger ON_CLICK event.
But i couldnot find the ON_DATA_CHANGED event in the ALV events.
Help me out in finding the event.
Cheers,
Madhu

Similar Messages

How to pass default value of argument to stored function?

Hi,
in procedure I don't have to pass all arguments, because I set it with name, but in stored function I have to set arguments with index som I must set all arguments. Some arguments have default value. So how to pass default value?
thx for any comments

It really helps me if someone tell me that it isn't possiblle.
thx.

How to set default value and after that , use it as control

Hello,
Currently i am making motor driver from labview, and i am facing one problem.
When i connect to my board via labview, it will relay last position to global variable. After that, i have to go to loop, where i can send back modified position to my motor control board
In short, i have to control number, but that number default value should be writtem by another function when i start vi.
any ideas how to do it ?
Solved!
Go to Solution.

Let me know if any clarification is needed
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
VI.vi ‏13 KB

In Drop Down by Index how can i pass default value Dynamically

Hi Friends,
In Drop Down by Index how can i pass default value Dynamically.Please help me.
Thanks in advance.
Regards,
Kumar.

hi,
if you want the value to be defaulted only the first time you execute the program then write the code which suman has mentioned in the views method
wddoinit.
Regards
Sajid

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass a value to a bind variable in a query report in oracle apex

Hi Guys,
I have requirement to send weekly reports via email to some users. The users should receive their own records in the report. The user details is stored in a table. What I am planning to do is to create a report query in oracle apex to generate the report and then run a function/procedure via a scheduler to email the report to respective users. Now my query is ............. is it possible to pass a value (user name) to the report query to pull records of only that user? I know we can have bind variables in the report query but I have no idea how to pass a value for bind variables from a function/procedure.
Can anyone help me on this issue or suggest a better approach?
Thanks,
San

You need to use dynamic sql
But please keep in mind that since you're using Oracle you may be better off posting this in some Oracle forums
This forum is specifically for SQL Server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to populate default values for BP (FPP1 is tcode in ECC 6.0)

Hello ,
I am creating BP in ECC 6.0 using Fpp1 tcode. How to populate default values when i hit create BP person.   any badi triggers when we are creating BP in ECC.
guide me.

Hi Premanand,
To default fields, you need to do the following steps :
1. Create a Z module e.g. : Z_DEFAULT_FIELDS_DIALOG.
2. Enter suppose you want to default fiels Name, title, country, write code as follows :
DATA : ls_busdefault LIKE busdefault.
ls_busdefault-title = '0002'.
ls_busdefault-mc_name1 = 'TEST'.
ls_busdefault-mc_name2 = 'Default'.
ls_busdefault-country = 'IN'.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
      i_busdefault = ls_busdefalut.
3. Now got to transaction BUS7, select event ISDAT, click on Event--> function modules.
4. Register your Z module Z_DEFAULT_FIELDS_DIALOG in this list, Save.
This should solve your problem. Please note : You can only default those fields contained in structure BUSDEFAULT.
Cheers,
Rishu.

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to change default value in a table using ALTER TABLE

Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regards

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How to Pass Click Value to DB using Java

How to Pass Click Value to DB using Java and display tat
clicked value row data in flex
i have created connection with Sql Server using java and drew
pie chart from values fetched from XML file created by Java
wat i need is when i click pie chart region (widget) i should
display a alert by giving value of particular widget name and Value
from Database and display in Flex Alert

Use AddResource to add Javascript in your BackingBean Code and pass the value to your javascript code.
JSCookMenu and other dynamic adding of javascript to a JSF-JSP page is done using AddResource....

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How to pass Default value of a cell in to input control

Similar Messages

Maybe you are looking for