How to pass dynamic messages in a program

Hello Experts,
Would any one say..In a module pool program..I supose to pass dynamic messages..How can i do..
Thanks in advance..
Prashanthi

Is this what you are looking for ? Re: Call MESSAGE dynamically

Similar Messages

How to pass dynamic filename to Receiver JMS channel

Hi experts,
I want to pass the dynamic filename to receiver JMS message Properties.
for example
I am passing directory name via adapter module AF_Modules/DynamicConfigurationBean with key and value combination like below. How to pass dynamic filename value to a dynamic property ( say DCJMSMessageProperty1)
eg.
key.0 - >insert http://sap.com/xi/XI/System/JMS DCJMSMessageProperty0
value.0 - > testdirectory ( which is static value)
Note: Im have not created any ESR object . i just have to bypass the file to a jms queue. I have used AAE integrated configuration scenario ( file to jms )
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Jan 27, 2011 4:45 PM
Edited by: Balaji Pichaimuthu on Jan 27, 2011 4:46 PM

Already given link for the dynamic configuration code snippet in the earlier reply... Below is the code snippet
Note: Use Adapter Specific Message Attributes for the target Communication Channel(CC).Check the indicator for filename in the advanced tab of CC
//UDF code
String filename="";
String NameSpace = "http:/"+"/sap.com/xi/XI/System/JMS";
try{
      DynamicConfiguration conf = (DynamicConfiguration) param.get(
        StreamTransformationConstants.DYNAMIC_CONFIGURATION);
      DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File",   "FileName");
       // read filename value
       filename = conf.get(key);
      // So far we extracted filename value .. now do your logic something like this...
      DynamicConfigurationKey key2 = DynamicConfigurationKey.create(NameSpace,"yourjmsvalue goes here");
       conf.put(key2,filename);
     } catch(Exception e){

FTP how to pass dynamic filename/directory location - reading a file in 11g

Hi All,
We r using FTP adapter(SOA 11g) for getting files in remote server, May i know how to pass dynamic filename and directory where the file exists for reading in server.
Thanks,
Rak

Hey according to my understanding, the Dynamic partner links are set only for the Outbound invocations only. Is my understanding right? if so, how do we create the dynamic partnerlinks for the ftp get kind of stuff...??
Thanks in advance

How to pass dynamic selection to logical databse using ldb_process function

dear friends,
can anybode tell me how to pass dynamic selection to the logical database when i m using LDB_PROCESS function module. however, in EXPRESSIONS paramter of the function module i m passing the selecti-option, it is passing their also but when i used more than two select-option or paramter it throw an exception FREE_SELECTIONS_ERROR.
SO PLEASE GUIDE ME HOW TO PASS MORE THAN TWO SELECT-OPTION IN LOGICAL DATANSE DYNAMICALLY USING LDB_PROCESS.

would be nice if you post the answer to all

How to pass Dynamic Table(s) to FM

Hello All i hv an requirement in which i need to process a block of code recursively. right now i am trying to do the same with Subroutine but its hard i know. I have an option to use FM instead but i am not sure if we can pass dynamic tables to FM, so is there anybody who had solution for the same. otherwise i can use it using TOP include to declare dynamic table in comon arae as im calling it from another FM(RFC) but i dont want to use that as it will consume more memory.
So i have 2 question
1. should i use FM instead of subroutine for recursive operation if yes how can know if i reached the maximum alloted size of memory for a program. is there any FM which can tell me about the memory used or somethign like that so that i can avoid any ABAP dump.
2.how can i pass dynamic tables as input to parameters.
Note : i allready seen https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f50dcd4e-0501-0010-3596-b686a7b51492

Hello Mani
Perhaps the sample report ZUS_SDN_TABLE_READ_VIA_RFC_XML in thread
How to return back a structure of dynamic tables in a Function Module
might be a useful approach for you.
Regards
Uwe

How to pass dynamic parameter to a database function in OBIEE

Hi,
I have a requirement like this. I have to create one report in OBIEE which was in Discoverer. Now in discoverer report there are some calculated item in the worksheet based on database pkg.functions. The parameter which user gives at run time that parameters are then passed to the discoverer calculated items dynamically. But I am not able to do this in OBIEE answers.
Can anyone tell me step by step how I can able to pass the user selected parameter values in OBIEE answer level.
The example:
GET_COMM_VALUE_PTD("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id)
GET_COMM_VALUE_PTD --- Function database
("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id --- Parameters... :"Period Name(AFE)" is the dynamic parameter selected run time by user.
Please help.
Thanks
Titas

Hi,
I already did that. But the existing discoverer re value report is showing correct value but the OBIEE report with EVALUATE function shows incorrect value.
The requirement is to create a OBIEE Dashboard from a Discoverer existing report. Now in discoverer report theere are several calculated items in worksheet level where database custom function is used and user selected parameter value is passed run time in that function. But when that is created in OBIEE with EVALUATE function in RPD, the report shows incorrect data. Could not understand how to pass the parameter value runtime.
Below is the discoverer 'Show SQL' query and EVALUATE function syntax which has been used.
SELECT APPS.XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(XXBG_PL_PROJ_AFE_V.AFE_ID,
:"Period Name(AFE)",
XXBG_PL_PROJ_AFE_V.DATA_SEL,
XXBG_PL_PROJ_AFE_V.ORG_ID),
XXBG_PL_PROJ_AFE_V.AFE_DESC,
XXBG_PL_PROJ_AFE_V.AFE_NUMBER,
XXBG_PL_PROJ_AFE_V.APPROVED_AFE_AMOUNT
FROM APPS.PA_PERIODS_ALL PA_PERIODS_ALL,
APPS.XXBG_PL_PROJ_AFE_V XXBG_PL_PROJ_AFE_V
WHERE ((XXBG_PL_PROJ_AFE_V.ORG_ID = PA_PERIODS_ALL.ORG_ID))
AND (XXBG_PL_PROJ_AFE_V.DATA_SEL = :"Data Selection(AFE)")
AND (PA_PERIODS_ALL.PERIOD_NAME = :"Period Name(AFE)")
AND (XXBG_PL_PROJ_AFE_V.AFE_NUMBER = :"AFE Number(AFE)")
AND (XXBG_PL_PROJ_AFE_V.OPERATING_UNIT = :"Operating Unit(AFE)")
The EVALUATE function syntax is as below:
EVALUATE('XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(%1,%2,%3,%4)' AS FLOAT , "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Afe Id", "BG PL Project Analysis Report_1"."Periods 1"."Periods 1.Period Name", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Data Sel", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Org Id")
The PERIOD needs to be passed at run time which user will select.
Please help to solve the issue.

How to pass dynamic values in standard text......

Hello,
I have no idea that how to create the standard text with transaction SO10,and how to pass the dynamic values to that standard text.Will you guide me with step-by-step procedure.
Thanking you in advance,
Regards,
Asmitha.

Hi,
    Goto SO10 Tcode
Give :- Text Name:- any Name
           Text Id :- ST
            Language:- required language
Now the Text which you want to print along with the Dynamic variable,
Ex:- Sales order number is &VBAK-VBELN&
Save and Activate
above is i have given it VBAK-VBELN, you can give field name which hold dynamic value.
Now call the above created Standard text in your Form and check it.
Regards
Bala Krishna

How to Pass Dynamic values to XML in flex

Hi,
i just want to pass dynamic values. it must be stored in XML
List or XML .for Ex: In my App i want to pass
Edu_Institute,From_date,To_Date,Qualification fileds to
Education table. I have used Webservices to connect with the
Backend.
At that time of processing, i want to pass 2 or more sets of
Dynamic Values of Edu_Instiute,From_Date,To_Date....... to my
webservice .
i fetch the Edu_Institute value from text1.text From_Date
from Datefield1.text etc... when i click the Add Button it must be
stored in XMLnode[0],XMLnode[1]......& i will pass this nodes
to my table
How to do that??
Can anyone please find out the solution for me??
Thanks
Regards,
Thenmalar v

Are you asking how to build XML in Actionscript?
If so, the "literal" syntax is easy:
var xmlData:XML = <root><text
myAttr={test1.text}</root>
You can also work directly with the XML class methods.
Tracy

How to pass dynamically table name in my cursor declaration

Hi:
I am new. could you please let me know how to pass a table name dynamically in my cursor declaration? for instance I am declaring the following cursor in my pl/sql procedure:
CURSOR crs_validate IS
select * FROM <ACT_JUN_2006_LOB>;
this ACT_JUN_2006_LOB table name, I should able to pass it when I open the cursor ... any help appreciated. thanks.
srini

Thanks all for the response. REFCURSOR does work: here is an example ... which I found on-line
procedure emp_test(
month varchar2,
year varchar2)
is
type cur_typ is ref cursor;
c cur_typ;
query_str varchar2(200);
emp_number number := 7900;
salary number;
name varchar2(30);
Begin
query_str := 'Select empno, ename, sal from emp_' || month ||'_'||year
|| ' where empno = :id';
open c for query_str using emp_number;
loop
fetch c into emp_number, name, salary;
exit when c%notfound;
dbms_output.put_line(emp_number);
end loop;
close c;
end;

How to pass data from a C++ program to LV to plot the data real time?

Hello,
I am writing a C++ program in which I need to plot the data in real
time. I would like to pass data from my C++ program to LabView in order
to perfrom the plotting. I was wondering if this is possible. If so,
how can it be done? .
Thank You

There are several C++ examples and application notes here.

How to Pass internal table from a program to Samrt form

Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
Praveen

Hai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b.

How to pass error message for an additional tab strip in MIGO

Hi,
I have created one additional tab strip in MIGO transaction,In that tab i have 5 text fields,In that 4 text fields i want to make as mandatory fields,In the existing screen MIGO is using " Application log" for passing any error message It is calling as include program in SAPLMIGO report program,In that "lmigolo2 " is the include program name.Now i am struggling how to make use that in my newly created screen.
Regards
Ambili B

Hi rahul,
Can u try these
:Object failed to run due to an error while processing on the Job Server.
2 )Object failed to run due to an error
3 )Object failed to run due to an error while proc... | SCN

How to pass error message when restoring iPhone on iTunes?

I am trying to restore my iPhone on iTunes. But since I have update my MbP to OSX 10.8.2 I can not get passed an error message on iTunes after it is done extracting the software and is contacting iTunes. I have wifi and everything works fine. I heard it could be a host issue, but I have no idea how to fix it? Any help would be appreciated.

Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
                 USING g_t_bdcdata
                 MODE g_l_mode
                 UPDATE 'S'
                 MESSAGES INTO g_t_msg          .
errors will be stpored in the table g_t_msg ..
Thanks .

How to pass dynamic values to JDBC Database adapter in PureSQL operation?

I want to fetch the records from the table via JDBC database adapter with the criteria but I should not hardcode the values inside my query. I am using Execute by PureSQL operation. Values might change in future and it is the reason I should not hardcode the values and instead I should pass it dynamically.
This is my query:
SELECT FROM Table0 t0, Table1 t1 WHERE t0.Field1= 'ABC' AND t0.Field2= 'DEF' AND t0.Field3 = 'CBA' AND t1.FLAG IS NULL AND t1.Field1 = t0.Field4*
The values 'ABC', 'DEF', 'CBA', 'NULL' are not fixed and it can be changed. Hence, I need to pass the values for these fields dynamically. What must be passed in the query and where to pass the User Defined Values during the run time.
Please can anyone suggest how to resolve this. I am using SOA 11g.
Thanks in advance.

Hi,
Ensure that you use the Adapter Configuration Wizard to do the query modification suggested by Arik. This will allow the schema for the DB Adapter getting created automatically. Also revisit this schema to assure that the data types of the bind parameters (parameters with #) have been correctly populated in the schema.
You can get some help from this too although this doesn't fully match your use-case.
Regards,
Neeraj Sehgal

How to display Dynamic Message in Message Pool.

HI All,
I want to display the Error Message in Message Pool Dynamically.
By creating only one Message in Message Pool of Type Error.
I.E If user leaves the First Name and Last Name Field Blank then
Error Message Should appear as:
Please Enter First Name.
Please Enter Last Name.
How could i achieve this.....
Regards,
Dhruv Shah

Hi Dhruv,
In the Message Pool create a new Message of Type error and the Text Please enter the .
And on the action of Your Submit button write the following code :-
String strFirstName = wdContext.currentContextElement().getFirstName();
IWDMessageManager msgMgr = WdComponentAPI().getMessageManager();
IWDAttributeInfo <ObjectName> = this.wdContext.getNodeInfo.getAttribute("FirstNameField");
if( strFirstName == null || strFirstName.length() == 0)
msgMgr.reportContextAttributeMessage(wdContext.currentContextElement,<ObjectName>,IMessage<componentName>.<MessageKey>,new Object[] {"First Name"},true);

How to pass dynamic messages in a program

Similar Messages

Maybe you are looking for