How to pass internal table data from model to BSP page.

Hi Experts,
I have requirement where I have got data from deep structure in Model.
The structure has two fields > 1. normal data tyoe + the other one is of table type.
Thanks and Regards,

if you have defined the attribute then you can ABAP coding to use it in BSP.
for eg, here i am looping the intenal table and passing the data to list item box.
    <%
  LOOP AT lt_dyn_uom INTO wa_dyn_uom.
    %>
            <htmlb:listBoxItem key   = "<%= wa_dyn_uom-name %>"
                               value = "<%= wa_dyn_uom-value %>" />
     <%
  ENDLOOP.
     %>
Thanks,
Chandra

Similar Messages

  • How to access internal table data from webdynpro to Flex application.

    Hi Connoisseur
    The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and  Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
    There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
    i tried to do pass internal table value  to flex-datagrid.but its not work.
    i would like to know
    1.how to access internal table data from webdynpro to Flex application.
    2.how to pass the internal table to flex-datagrid.
    2.how to pass dynamically in ADOBE flex.
    3. how to do Flex is receiving the wd context data?
    4. how can we update WD context with FLEX data.
    Ple give me sample example and step by step procedure.
    Regards
    laxmikanth

    Hi Laxmikanth,
    Please refer this...
    Flash island: update complex type from flex
    Cheers..
    kris.

  • How to pass internal table to method of class

    Hi all,
    I am new to abap objects, i want to pass one internal table to class.
    i am trying in this way.
    class c1 definition.
    method get_material importing t_stpo  type any table
                                   exporting t_mast type any table.
    endmethod.
    endclass.
    class c1 implementation.
    method get_material.
    select f1 f2 f3 from <tab> into table t_mast
            for all entries in t_stpo
            where stlnr = t_stpo-stlnr.
    endmethod.
    endclass.
    ERROR:
    "stlnr" is not available
    if i use this way. its not giing error.
    class c1 definition.
    method get_material exporting t_mast type any table.
    endmethod.
    endclass.
    class c1 implementation.
    method get_material.
    select f1 f2 f3 from <tab> into table t_mast
            for all entries in it_stpo
            where stlnr = it_stpo-stlnr.
    endmethod.
    endclass.
    how to pass internal table with some specific reference may be using like or type <it_xxxx>
    thanks

    Try this.
    TYPES : BEGIN OF ty_stpo,
             stlnr TYPE stpo-stlnr,
             idnrk TYPE stpo-idnrk,
             menge TYPE stpo-menge,
            END OF ty_stpo,
            BEGIN OF ty_mast,
             matnr TYPE mast-matnr,
             werks TYPE mast-werks,
             stlnr TYPE mast-stlnr,
            END OF ty_mast,
            tt_stpo TYPE TABLE OF ty_stpo,
            tt_mast TYPE TABLE OF ty_mast.
    DATA : it_stpo TYPE tt_stpo,
           it_mast TYPE tt_mast.
    *       CLASS c1 DEFINITION
    CLASS c1 DEFINITION.
      PUBLIC SECTION.
        METHODS : get_bom_numbers EXPORTING ex_stpo type tt_stpo,
                  get_parent_material IMPORTING im_stpo TYPE tt_stpo
                                      EXPORTING ex_mast TYPE tt_mast.
        endclass.
    *       CLASS c1 IMPLEMENTATION
    CLASS c1 IMPLEMENTATION.
      METHOD get_bom_numbers.
      ENDMETHOD.                    "get_bom_numbers
      METHOD get_parent_material.
      ENDMETHOD.                    "get_parent_material
    START-OF-SELECTION.
      DATA : obj TYPE REF TO c1.
      CREATE OBJECT obj.
      CALL METHOD obj->get_bom_numbers
        IMPORTING
          t_stpo = it_stpo.
      CALL METHOD obj->get_parent_material
        EXPORTING
          im_stpo = it_stpo
        IMPORTING
          ex_mast = it_mast.
    Regards,
    Rich Heilman

  • How to pass  internal table values to parameter

    hi,
             how to pass  internal table values to parameter in selection screen.if is it possible means please sent codeings.
    thanks.
      stalin.

    hi,
    tables : mara.
    data :  begin of itab_mara occurs 0,
              matnr like mara-matnr,
              ernam like mara-ernam,
              end of itab_mara.
    selection-screen : begin of block blk1 with frame title text-001.
    parameters : p_matnr like mara-matnr.
    selection-screen : end of block blk1.
    select matnr ernam from mara into corresponding fields of itab_mara
                                                                    where matnr = p_matnr.
    loop at itab_mara.
    write :/ itab_mara-matnr,
               itab_mara-ernam.
    endloop.
    <b><REMOVED BY MODERATOR></b>
    Message was edited by:
            Alvaro Tejada Galindo

  • How to Populate Internal table data to Table Control in a Report Program

    Dear All,
           How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
    Thanks in Advance,
    Joseph Reddy

    If you want to use a table control, you will need to create a screen.
    In your report....
    start-of-selection.
    perform get_data.  " Get all your data here
    call screen 100. " Now present to the user.
    Double click on the "100" in your call screen statement.  This will forward navigate you to the screen.  If you have not created it yet, it will ask you if you want to create it, say yes.  Go into screen painter or layout of the screen.  Use the table control wizard to help you along the process.  It will write the code for you.  Since it is an output only table control, it will be really easy with not a lot of code. 
    A better way to present the data to the user would be to give it in a ALV grid.  If you want to go that way, it is a lot easier.  Here is a sample of the ALV function module.  You don't even have to create a screen.
    report zrich_0004
           no standard page heading.
    type-pools slis.
    data: fieldcat type slis_t_fieldcat_alv.
    data: begin of imara occurs 0,
          matnr type mara-matnr,
          maktx type makt-maktx,
          end of imara.
    * Selection Screen
    selection-screen begin of block b1 with frame title text-001 .
    select-options: s_matnr for imara-matnr .
    selection-screen end of block b1.
    start-of-selection.
      perform get_data.
      perform write_report.
    *  Get_Data
    form get_data.
      select  mara~matnr makt~maktx
                into corresponding fields of table imara
                  from mara
                   inner join makt
                     on mara~matnr = makt~matnr
                        where mara~matnr in s_matnr
                          and makt~spras = sy-langu.
    endform.
    *  WRITE_REPORT
    form write_report.
      perform build_field_catalog.
    * CALL ABAP LIST VIEWER (ALV)
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                it_fieldcat = fieldcat
           tables
                t_outtab    = imara.
    endform.
    * BUILD_FIELD_CATALOG
    form build_field_catalog.
      data: fc_tmp type slis_t_fieldcat_alv with header line.
      clear: fieldcat. refresh: fieldcat.
      clear: fc_tmp.
      fc_tmp-reptext_ddic    = 'Material Number'.
      fc_tmp-fieldname  = 'MATNR'.
      fc_tmp-tabname   = 'IMARA'.
      fc_tmp-outputlen  = '18'.
      fc_tmp-col_pos    = 2.
      append fc_tmp to fieldcat.
      clear: fc_tmp.
      fc_tmp-reptext_ddic    = 'Material'.
      fc_tmp-fieldname  = 'MAKTX'.
      fc_tmp-tabname   = 'IMARA'.
      fc_tmp-outputlen  = '40'.
      fc_tmp-col_pos    = 3.
      append fc_tmp to fieldcat.
    endform.
    Regards,
    Rich Heilman

  • How to convert internal table data to PDF format

    HI,
         I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to convert internal table data to PDF format.
    Kishore

    In which format is your data in the internal table currently. Is it returned by a smartform/script or its just data fetched from some database table into an internal table. Since its obvious that the data should appear in the PDF with some Layout, you should be using smartform to format the data properly. See the Link
    Smartform to PDF to EMAIL
    This shows convertion of smartform to pdf and send it through email
    Regards,
    Abhishek

  • How to transfer internal table data to Applicatiion Server in XML fromat.

    how to transfer internal table data to Applicatiion Server in XML fromat.

    Hi if u want to transfer from to application server using xml in
    do like this,
    v_xml_table is u r internal table,
    and define li_xml_table as line of u r internal table
    OPEN DATASET g_file FOR OUTPUT IN BINARY  MODE .
        LOOP AT v_xml_table INTO  li_xml_table.
          TRANSFER li_xml_table TO g_file .
        ENDLOOP.
        CLOSE DATASET g_file.
      ENDIF.
    <removed_by_moderator>
    Regards,
    Prasad.
    Edited by: Julius Bussche on Jul 16, 2008 2:43 PM

  • How to Convert internal table data into text output and send mail in ABAP

    Hi All,
    Good Morning.
    Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
    But thought of doing it without excel.
    I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!.  Instead I  want to send this output to User's mails as Normal mail body with No attachments.
    Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
    as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
    Best Regards
    Dileep VT

    here's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
    notice we use gt_text as "mail body"
    TRY.
    *     -------- create persistent send request ------------------------
           gv_send_request = cl_bcs=>create_persistent( ).
    *     -------- create and set document -------------------------------
    *     create text to be sent
           wa_line = text-001.
           APPEND wa_line TO gt_text.
           CLEAR wa_line.
           APPEND wa_line TO gt_text.
           LOOP AT gt_fail ASSIGNING <fs_fail>.
             MOVE <fs_fail>-retry_count TO gv_count.
             CONCATENATE text-002
                         <fs_fail>-setting_id
                         text-003
                         gv_count
                         INTO wa_line SEPARATED BY space.
             APPEND wa_line TO gt_text.
             CLEAR wa_line.
           ENDLOOP.
           APPEND wa_line TO gt_text.
           wa_line = text-007.
           APPEND wa_line TO gt_text.
    *     create actual document
           gv_document = cl_document_bcs=>create_document(
                           i_type    = 'RAW'
                           i_text    = gt_text
                           i_length  = '12'
                           i_subject = 'Failed Precalculation Settings!' ).
    *     add document to send request
           CALL METHOD gv_send_request->set_document( gv_document ).
    *     --------- set sender -------------------------------------------
           gv_sender = cl_sapuser_bcs=>create( sy-uname ).
           CALL METHOD gv_send_request->set_sender
             EXPORTING
               i_sender = gv_sender.
    *     --------- add recipient (e-mail address) -----------------------
           LOOP AT s_email INTO wa_email.
             MOVE wa_email-low TO gv_email.
             gv_recipient = cl_cam_address_bcs=>create_internet_address(
                                               gv_email ).
             CALL METHOD gv_send_request->add_recipient
               EXPORTING
                 i_recipient = gv_recipient
                 i_express   = 'X'.
           ENDLOOP.
    *     ---------- set to send immediately -----------------------------
           CALL METHOD gv_send_request->set_send_immediately( 'X' ).
    *     ---------- send document ---------------------------------------
           CALL METHOD gv_send_request->send(
             EXPORTING
               i_with_error_screen = 'X'
             RECEIVING
               result              = gv_sent_to_all ).
           IF gv_sent_to_all = 'X'.
             WRITE text-004.
           ENDIF.
           COMMIT WORK.
    *   exception handling
         CATCH cx_bcs INTO gv_bcs_exception.
           WRITE: text-005.
           WRITE: text-006, gv_bcs_exception->error_type.
           EXIT.
       ENDTRY.
    with the following declarations
    * TABLES                                                               *
    TABLES:
       adr6,
       rsr_prec_sett.
    * INTERNAL TABLES & WORK AREAS                                         *
    DATA:
       gt_fail          TYPE SORTED TABLE OF rsr_prec_sett
                             WITH UNIQUE KEY setting_id run_date,
       gt_text          TYPE bcsy_text,
       wa_fail          LIKE LINE OF gt_fail,
       wa_line(90)      TYPE c.
    FIELD-SYMBOLS:
       <fs_fail>        LIKE LINE OF gt_fail.
    * VARIABLES                                                            *
    DATA:
       gv_count(4)      TYPE n,
       gv_send_request  TYPE REF TO cl_bcs,
       gv_document      TYPE REF TO cl_document_bcs,
       gv_sender        TYPE REF TO cl_sapuser_bcs,
       gv_recipient     TYPE REF TO if_recipient_bcs,
       gv_email         TYPE adr6-smtp_addr,
       gv_bcs_exception TYPE REF TO cx_bcs,
       gv_sent_to_all   TYPE os_boolean.
    * SELECTION-SCREEN                                                     *
    SELECT-OPTIONS:
       s_email          FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
    DATA:
       wa_email         LIKE LINE OF s_email.

  • How to download internal table data into xml file?

    Hi,
    Experts,
    I have downloaded internal table data into XLS format using GUI_DOWNLOAD Function module, But i didn't Know how to download internal table data into XML format please post some ideas/inputs on this issue.
    Thank you,
    Shabeer ahmed.

    check this
    data : gd_repid type sy-repid.
    GD_REPID = SY-REPID.
    DATA : L_DOM TYPE REF TO IF_IXML_ELEMENT,
           M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
           G_IXML TYPE REF TO IF_IXML,
           W_STRING TYPE XSTRING,
           W_SIZE TYPE I,
           W_RESULT TYPE I,
           W_LINE TYPE STRING,
           IT_XML TYPE DCXMLLINES,
           S_XML LIKE LINE OF IT_XML,
           W_RC LIKE SY-SUBRC.
    DATA: XML TYPE DCXMLLINES.
    DATA: RC TYPE SY-SUBRC,
          BEGIN OF XML_TAB OCCURS 0,
          D LIKE LINE OF XML,
          END OF XML_TAB.
    data : l_element           type ref to if_ixml_element,
           xml_ns_prefix_sf     type string,
           xml_ns_uri_sf        type string.
    CLASS CL_IXML DEFINITION LOAD.
    G_IXML = CL_IXML=>CREATE( ).
    CHECK NOT G_IXML IS INITIAL.
    M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
    CHECK NOT M_DOCUMENT IS INITIAL.
    CALL FUNCTION 'SDIXML_DATA_TO_DOM'
    EXPORTING
       NAME = 'REPAIRDATA'
       DATAOBJECT = IT_FINAL_LAST1[]
    IMPORTING
       DATA_AS_DOM = L_DOM
    CHANGING
       DOCUMENT = M_DOCUMENT
    EXCEPTIONS
       ILLEGAL_NAME = 1
       OTHERS = 2.
    CHECK NOT L_DOM IS INITIAL.
    W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
    *Start of code for Header
    * namespace
    t_mnr = sy-datum+4(2).
    CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
      EXPORTING
        LANGU         = 'E'
        MONTH         = t_mnr
    IMPORTING
       T247          = wa_t247
    concatenate sy-datum+6(2)
                wa_t247-ktx
                sy-datum(4) into t_var1.
    concatenate sy-uzeit(2)
                sy-uzeit+2(2)
                sy-uzeit+4(2) into t_var2.
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    l_element  = m_document->get_root_element( ).
    xml_ns_prefix_sf = 'TIMESTAMP'.
    concatenate t_var1 t_var2 into xml_ns_uri_sf separated by space.
    clear : t_var1,
            t_var2,
            t_mnr,
            wa_t247.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    xml_ns_prefix_sf  = 'FILECREATOR'.
    xml_ns_uri_sf    =   'SAP'.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    xml_ns_prefix_sf  = 'CLAIMGROUP'.
    xml_ns_uri_sf    = '1'.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    xml_ns_prefix_sf  = 'CLAIMTYPES'.
    xml_ns_uri_sf    = 'W'.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    *End of Code for Header
    CALL FUNCTION 'SDIXML_DOM_TO_XML'
    EXPORTING
      DOCUMENT = M_DOCUMENT
    IMPORTING
      XML_AS_STRING = W_STRING
      SIZE = W_SIZE
    TABLES
      XML_AS_TABLE = IT_XML
    EXCEPTIONS
      NO_DOCUMENT = 1
      OTHERS = 2.
    LOOP AT IT_XML INTO XML_TAB-D.
    APPEND XML_TAB.
    ENDLOOP.
    *Start of Code for File name
    concatenate p_file
                '\R'
                '000_119481'
                sy-datum+6(2) sy-datum+4(2) sy-datum+2(2)
                sy-uzeit(2)   sy-uzeit+2(2) sy-uzeit(2) '.xml' into p_file.
    *End of Code for File name
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
      BIN_FILESIZE = W_SIZE
      FILENAME = p_file
      FILETYPE = 'BIN'
    TABLES
      DATA_TAB = XML_TAB
    EXCEPTIONS
      OTHERS = 10.
    IF SY-SUBRC  = 0.
                  MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • How to pass internal table from FM to mai report

    Hi,
    I have created a new FM and under this all mine data is coming in one internal table IT_OUTPUT. now how to take this internl table to main report along with whole data.

    hi
    As i understand, your are using this function module in your report, giving some parameters then u r getting complete data into one internal table if i am not wrong.
    When u execute ur report this function module will give u the data through internal table. Just use that internal table to display the data using write statement if it is classical report. If it is ALV report use REUSE_ALV_LIST_DISPLAY or REUSE_ALV_GRID_DISPLAY to display the internal table data in screen
    Thanks
    Siva Kumar

  • How to save internal table data to file on local disk from smartforms?

    Hi there,
    I'm trying to save internal table data into .csv file on presentation server from within smartforms using GUI_DOWNLOAD function.
    This function works fine from abap program, but when I call it from smartforms it does nothing. Form prints ok and there is no file created on local dick.
    Is there a way to save smartforms internal table data to local disk?
    Thanks in advance,
    Baske

    Hi Jey,
    Thanks for your prompt replay.
    Unfortunately, Iu2019ve tried both your suggestions without success. Smartforms behaves just like in case of GUI_DOWNLOAD. There is no file saved on disk.
    Do you have any other idea?
    BR,
    Baske

  • How to send internal table data through mail from report in foreground

    hi all,
    iam trying  to convert the internal table data into excel format and sending it through mail by runnning the report in foreground.
    mail is going sucessfully with excel format,but iam facing the problem in the excel format of the material column as follows:
    the matrno shows the wrong format -2.63E+11  instead of displaying correct format-263215000000.
    Pls suggest the alternative process for the above mentioned problem.
    Thanks,
    Sivagopal R.

    Hi Siva,
      Try to copy 263215000000 in one of the cells of excel sheet and press enter.It will automatically convert into -2.63E+11 .
      This means the default formatting of the excel sheet makes this happen.If you convert the format of the cell to "NUMBER" then u will get the required result.
      But I doubt whether or not it is possible through ABAP programming.
    Regards,
    Vimal.

  • How to pass internal table to form routine..?

    Gurus,
    I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
      DATA: Begin of tb_set_values occurs 0.
            include structure rgsb4.
      DATA: End of tb_set_values.
    PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
    FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
                               CHANGING rtb_set_values LIKE tb_set_values[].
    DATA: v_setid TYPE setid.
    *DATA: Begin of rtb_set_values occurs 0.
         include structure rgsb4.
    *DATA: End of rtb_set_values.
      CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
        EXPORTING
          SHORTNAME = rwa_setheader-setname
        IMPORTING
          NEW_SETID = v_setid.
      CALL FUNCTION 'G_SET_GET_ALL_VALUES'
        EXPORTING
          SETNR      = v_setid
        TABLES
          SET_VALUES = rtb_set_values.
    ENDFORM.
    What can be the error..please help

    Well actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
    REPORT rich_0001.
    DATA: setheader TYPE string.
    DATA: wa_setheader TYPE string.
    DATA: BEGIN OF tb_set_values OCCURS 0.
            INCLUDE STRUCTURE t000. "<<-- Test with T000 instead    "rgsb4.
    DATA: END OF tb_set_values.
    SELECT * INTO TABLE tb_set_values  FROM t000.
    PERFORM read_sets_with_values USING wa_setheader
                                  CHANGING tb_set_values[].
    *&      Form  read_sets_with_values
    *       text
    *      -->VALUE(RWA_SETHEADER)  text
    *      -->RTB_SET_VALUES        text
    FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
                               CHANGING rtb_set_values LIKE tb_set_values[].
      DATA: ls_set_values LIKE LINE OF rtb_set_values.
      LOOP AT rtb_set_values INTO ls_set_values.
        WRITE:/ ls_set_values.
      ENDLOOP.
    ENDFORM.                    "read_sets_with_values
    Regards,
    RIch Heilman

  • How to Convert internal table data into xml and xml data into internal tab

    Hi Guys,
          I have a requirement  that  i have to convert the internal table data into xml format and viceversa . for my requirement  i came to know that i have to use Transformations concept.  i done the converting the data from internal table into xml data by using standard Tranformations. My Question is 
    1) Can i use same Transformation to convert the xml data into abap internal table. if it is possible then how ???
    2) Is it possible using the standard Transformation  or I have to go for XSLT approach
    Please help me out from this guys,
    Thanks and Regards
    Koti

    Hi Koti,
    This is possible. There is a link. With the help of this link you can convert ABAP data to XML and vice versa.
    Link: http://www.heidoc.net/joomla/index.php?option=com_content&view=article&id=15:sapxslt&catid=22:sap-xslt&Itemid=31

  • How to  write  internal table data vertically . Records vertically.

    Hi pals,
          How to write internal table records vertically .
    suppose the records are
    a1 a2 a3
    b1 b2 b3
    we need to display
    a1  b1
    a2  b2
    a3  b3
    Thanks in advance.
    balaji.T

    Just check the code
    DATA: BEGIN OF itab OCCURS 0,
            f1 TYPE i,
            f2 TYPE i,
            f3 TYPE i,
          END OF itab.
    DATA pos TYPE i.
    "Define your lines where you want to print here...
    DATA line1 TYPE i VALUE 10.
    DATA line2 TYPE i VALUE 12.
    DATA line3 TYPE i VALUE 14.
    itab-f1 = '1'.
    itab-f2 = '10'.
    itab-f3 = '100'.
    APPEND itab.
    itab-f1 = '2'.
    itab-f2 = '20'.
    itab-f3 = '200'.
    APPEND itab.
    itab-f1 = '3'.
    itab-f2 = '30'.
    itab-f3 = '300'.
    APPEND itab.
    itab-f1 = '4'.
    itab-f2 = '40'.
    itab-f3 = '400'.
    APPEND itab.
    loop at itab.
    write : / itab-f1,itab-f2,itab-f3.
    endloop.
    LOOP AT itab.
      pos = pos + 10.
      SKIP TO LINE line1.
      POSITION pos.
      WRITE itab-f1.
      SKIP TO LINE line2.
      POSITION pos.
      WRITE itab-f2.
      SKIP TO LINE line3.
      POSITION pos.
      WRITE itab-f3.
    ENDLOOP.

Maybe you are looking for