How to pass parameter value to third party application - silver light

Hi Experts,
I have requirement where i have to pass 3 parameter - namely Position key, Job , Job stag
The application is third party application - build in Microsoft silver light
Now from my application i have to pass 3 parameter to this application (URL)
Can any one suggest me how can i proceed to do this
Thanks in advance,
Regards
Farooq

Hi
Check this Link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05953ea-2608-2d10-968a-b44e8315049c?QuickLink=index&overridelayout=true
Thanks and Regards
Suresh

Similar Messages

How to pass parameter values to a customer exit web item (WAD)

Hi gurus,
I have a wad with a data provider and a filter panel filtering that dp by using a variable. There is also a customer exit which saves the values of that variable into a z table.
How can I pass the values of the filter panel to the customer exit web item?
Thanks in advance,
Rob

Can you clarify your scenario? Which is the case you're talking about?
1) You want to pass a parameter from OmniPortlet to a PL/SQL procedure.
2) You want to pass a parameter from a PL/SQL procedure to OmniPortlet.
In both cases the most obvious way of doing it is through request (URL) parameters.
Render a link in your portlet (either in OmniPortlet or using PL/SQL) that invokes a portal page, containing the other portlet.
Both OmniPortlet and PL/SQL allow you to wire and access page parameters.
Take a look at the Using Parameter and Events section of the Portal User's Guide and the Parameters and Events section of the Portal Developer's Guide.
Hope this helps,
Peter

How to Pass Parameter/Value to the second page????

Hi,
I am trying to display same popup window when I click on ADD,UPDATE and VIEW buttons. I don’t have any problem in displaying the popup when I click on ADD and UPDATE button but with VIEW button I wanted to display the popup at read only mode. In order to do that I have created a bean with session scope and set a ‘SetActionListener‘on VIEW button and set ‘from’ property to true and ‘to’ property to "#{IndividualSummaryDetails.readOnlyAddress}". I could not pass the value of readOnlyAddress to the popup. How can I pass the value of readOnlyAddress to the popup?
This value becomes true when I click on view button. If I pass that value to the popup then I can set the read only property of the fields on the popup with that value. So that the fields become read only.
Here is my View button
<af:commandButton text="#{CoreProperties['Global.commandButton.View']}"
windowHeight="450" windowWidth="600"
useWindow="true"
action="dialog:FromIndividualSummaryDetailsToAddress"
id="justView">
<af:setActionListener from="#{true}"
to="#{IndividualSummaryDetails.readOnlyAddress}"/>
Here is my Bean
public class IndividualSummaryDetails {
private Boolean readOnlyAddress;
public IndividualSummaryDetails() {
readOnlyAddress = true;
public Boolean isReadOnlyAddress() {
return readOnlyAddress;
public void setReadOnlyAddress(Boolean readOnlyAddress) {
this.readOnlyAddress = readOnlyAddress;
This value becomes true when I click on view button. If I pass that value to the popup then I can set the read only property of the fields on the popup with that value. So that the fields become read only.
Message was edited by:
V.Piraba

We need to use portlet events for sending parameters across different pages.
Following documents can give you insight on this :
1. http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/PRIMER.PORTLET.PARAMETERS.EVENTS.HTML
2. http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/DESIGNING.PAGES.USING.PDKJAVA.SAMPLE.EVENT.WEB.PROVIDER.HTML
-AMJAD.

How to pass parameter values to a report befor schedule it?

I tried to use Business Objects web service to schedule a report. But I failed to pass in any parameter values. The report was able to run successfully. But check all history from Infoview, all parameter are with NULL value. Does anybody encounter the same problem and has good resolution for this? Many thanks.
Here's my code:
// Logon Crystal Report Server
LogonCrystalServer();
// Find Report
GetOptions oGetOptions = new GetOptions();
oGetOptions.IncludeSecurity = false;
ResponseHolder rh = _bipService.Get("cuid://<" + reportCuid + ">@SI_SCHEDULEINFO, SI_PROCESSINFO", oGetOptions);
InfoObjects oInfoObjects = rh.InfoObjects;
if (oInfoObjects == null || oInfoObjects.InfoObject == null) return;
// Set Scheduling Info
CrystalReport oReport = (CrystalReport)oInfoObjects.InfoObject[0];
oReport.Name = oInfoObjects.InfoObject[0].Name;
SchedulingInfo oSchedulingInfo = oReport.SchedulingInfo;
oSchedulingInfo.RightNow = true;
oSchedulingInfo.ScheduleType = (ScheduleTypeEnum.ONCE);
oReport.SchedulingInfo = oSchedulingInfo;
// Set Format Info.
ReportProcessingInfo procInfo = oReport.PluginProcessingInterface;
CrystalReportFormatOptions repFormat = new CrystalReportFormatOptions();
repFormat.Format = ReportFormatEnum.EXCEL;
repFormat.FormatSpecified = true;
repFormat.UseExportOptionsInReport = true;
repFormat.UseExportOptionsInReportSpecified = true;
procInfo.ReportFormatOptions = repFormat;
// Get Report Parameters and Set their values
// I don't know if the step has any problem. I copied from wssdk sample.
ReportParameter[] repParams = procInfo.ReportParameters;
for (int i = 0; i < repParams.Length; i++)
    CurrentValues oCurrentValues = new CurrentValues();
    BusinessObjects.DSWS.BIPlatform.Desktop.PromptValue[] oPromptValue = new BusinessObjects.DSWS.BIPlatform.Desktop.PromptValue[1];
    oPromptValue[0] = new BusinessObjects.DSWS.BIPlatform.Desktop.PromptValue();
    oPromptValue[0].Data = "Test";
    oCurrentValues.CurrentValue = oPromptValue;
    repParams<i>.CurrentValues = oCurrentValues;
procInfo.ReportParameters = repParams;
oReport.PluginProcessingInterface = procInfo;
// Schedule run the report
InfoObjects infoObjects = _bipService.Schedule(oInfoObjects);
//Get new instance id
string instanceCuid = infoObjects.InfoObject[0].NewJobID;
Edited by: Shao Zelian on Jan 19, 2010 11:51 AM

Can you clarify your scenario? Which is the case you're talking about?
1) You want to pass a parameter from OmniPortlet to a PL/SQL procedure.
2) You want to pass a parameter from a PL/SQL procedure to OmniPortlet.
In both cases the most obvious way of doing it is through request (URL) parameters.
Render a link in your portlet (either in OmniPortlet or using PL/SQL) that invokes a portal page, containing the other portlet.
Both OmniPortlet and PL/SQL allow you to wire and access page parameters.
Take a look at the Using Parameter and Events section of the Portal User's Guide and the Parameters and Events section of the Portal Developer's Guide.
Hope this helps,
Peter

How to pass parameter value as "where [fieldname] = [fieldvalue]" in sql query under query type in SSRS report?

I am having trouble with passing dynamic string to sql query for executing SSRS reports.
I am using oracle database and I want to pass where clause parameter as "where LAND_NR = 6" to my select query.
For example: I want to execute Select * from employee :p_where.
where p_where parameter holds value "where LAND_NR = 6"
So it will treat as "Select * from employee where LAND_NR = 6" statement which will give me the list of records to display in my reports.
But it's not taking correct sql command throwing an error as "SQLcommand not properly ended."
How can I achieve this?

You need to use dynamic sql
But please keep in mind that since you're using Oracle you may be better off posting this in some Oracle forums
This forum is specifically for SQL Server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to pass parameter values to Bex query through xcelsius (LO or QWAAS)

Hi,
I have prompt in Bex query and want to pass values to query prompt through xcelsius .
In xcelsius i have selection
e.g 1] Combo selection is for Vendor
2] Combo selection is for Fiscal Year
If i select value from Combo list and refresh the dashboard im getting below error
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4IKKZVYWWD3XKQK7Z1BK34VTL], [Measures].[4IKKZVJJUFWIJHHBND6VJ0YE1], [Measures].[4IKKZV46SIP3I8EFBP26YX0YH], [Measures].[4IKKZUOTQLHOGZBJ00XIET3IX] } ON COLUMNS , NON EMPTY [0CREDITOR].[LEVEL01].MEMBERS ON ROWS FROM [0FIAP_O03/ZFIAP_O03_UNIVERSE] SAP VARIABLES [VN_VAR] INCLUDING A00140 [0S_FYEAR] INCLUDING V3/2010 : V3/2010 failed to execute with the error Unknown error. (WIS 10901)
I have tried using LO and QWAAS but not able to do so......
if any one knows plz help....

Hi,
most likely yo are passing the wrong value.
you need to send the key or the member unique name.
Ingo

HT3258 how to uninstall the installed incompatible third party application?

have install the incompatible application named "asphalt 6". but it doesn't remove from my machine. do you please tell me how to uninstall that type of application?

Have you checked the developers web site for directions?
Ciao.

HT201272 How to reinstall old version of third party application?

I was wondering if I can reinstall old version of my favorite goame app because it requires me to update my itouch's ios to 4.3 but I only have itouch 2G which has a limitation of 4.2.1 ios only

This is only possible if the older version still exists on your computer or in a backup of it.
(81653)

How to pass parameter as http POST in pageContext.setForwardURL

Hi,
I need to call a third party application page in my custom OAF page. I need to pass parameter to this third party page using POST method. I am using following command to call that -
HashMap hm = new HashMap();
hm.put("FirstName",firstName );
hm.put("LastName",lastName);
hm.put("AppSignature", signature);
pageContext.setForwardURL(hopURL,
null, // not necessary with KEEP_MENU_CONTEXT
OAWebBeanConstants.KEEP_MENU_CONTEXT, // no change to menu context
null, // No need to specify since we're keeping menu context
hm, // request parameters
false, // retain the root application module
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // display breadcrumbs
OAException.ERROR);
I am passing parameter to the page using hash map table. That application is expecting the parameters in POST format and I believe using hash map table the parameters will be passed as GET format.
We figured that out because one of the parameter we have to send is AppSignature which is 160 characters long. When third party applicatoin received that parameter they got only 151 characters, looks like they are truncated by GET method.
Any idea how to pass parameter using POST format so that this issue could be fixed.
Regards
Hitesh

Sumit,
Thanks for your reply. I have resolved this issue by forwarding all parameters in session using pageContext.putSessionValueDirect and redirect to a jsp using pageContext.redirectImmediately.
in jsp I read the params from session and set in the form , and then redirected to my third party application.
Regards
Hitesh

Reinstalling OS 10.9 and third party applications

After trying the many suggestions given here and still having problems with too many "applications quit unexpectedly" I have decided to reinstall 10.3.9. I would like to anticipate what I face by doing this---lost passwords, etc??? Also, how do I identify what are third party applications? Not usually a conspiracist, but five times this pm when i have tried to visit the votenader site, a crash has occured within seconds after I get to the site lol.

Panthetic,
Web browsers, such as Firefox and Camino compatible on 10.3.9, are still being updated by their developers to keep pace with changing web standards. Safari is being updated but not for 10.3.9 and it's version of Safari (1.3.2 is the farthest that a Panther user can update).
Camino will feel very similar to Safari and can be customized to feel even more like it but the benefit is that it will function on sites that Safari 1.3.2 can no longer handle (Google Maps etc.).
Personally, I would leave Safari and Firefox alone on your Mac for now as it's nice to have a backup browser if you have any problems with another that you are using (ie. Camino). If your available disk space is that low perhaps trash one but hold on to at least one spare browser.
If you suspect a third party application of causing system problems I would look first to applications that embed themselves or intergrate more fully into the system. Applications that perhaps add a menubar icon or a system preference pane of it's own. Those would more likely cause problems with the system than a browser I should think.
Can you not remember which apps you have downloaded as third party applications?
"As before, how do you identify which ones are?"
I don't have a method of determining original installed apps that came with your computer. Alot of that depends upon what model you have and what software was bundled with it originally. I'm from the school of "if I don't know for sure don't mess with it" so you don't stand the chance of messing up the system. If there are particular apps that you have questions about deleting you are probably wise to post back and ask before deleting them.
littleshoulders
Message was edited by: littleshoulders

SSRS How to pass a value for Hidden parameter ?

Hello,
I have a SSRS report deployed on the Report server. This report is having an "Hidden" parameter.
Could someone please guide me, how to pass the value to this internal parameter in each of the following case -
1. Report is accessed through a Desktop application/Web application in Report Viewer.
2. Report is accessed through the Url.
3. Report is accessed through the Report Manager.
Any quick help on this is highly appreciated.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hi Vinay Pugalia,
Internal Parameters in SSRS are parameters that are not configurable by the end-user at run-time and values cannot be passed to this type of parameter (when present in the child report) in case of a drill-through report implementation. This
type of parameter is read-only and not accessible in parent report.
This varies from a Hidden Parameter, which the user is not prompted to provide, but can still be configured through the URL to the report server.
So no matter you access the report through report manager, URL or Report Viewer. The passing value to the internal parameter will not work.
As you have mentioned that I will also suggest you use the hidden parameter instead.
More details information in this blog for your reference:
SSRS – Understanding Report Parameter Visibility
How to pass value to hide parameter is the same as that of the visible parameter, similar thread for your reference:
Passing the value in action property of a text box
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

How to pass a value to the export parameter for a method (public instance)?

Hello,
I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
Thanks in advance,
Ranjini

Hi,
"class definition
class lcl... definition.
public section.
method m1 imporitng par type ref to data. "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
endclass.
"in program
data: r_lcl type ref to lcl...
create object r_lcl.
call method r_lcl
exporting
par = "pass any reference variable here
Regards
Marcin

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to pass parameter into a source variable of a invoke activity

I'm an new BPELer, I created a invoke activity to submit Oracle Appplications concurrent program, but I don't know how to pass parameter into source variable.
BTW, I have created the mapper file (.xsl) file.
could anyone tell me how to do that?
Thanks,
Victor

Hi.
How you start application? I think you send message to webservice(BPEL process is webservice too). So construct message with variable and value.
But I created only processes where input value doesn't matter. I haven't use mapper yet too.

My third party applications keep de-activating. How do I fix this?

Hi everyone!
I am wondering if anyone can be of help to me. I am desperate.
I upgraded to Mavericks and am currently on version 10.9.5.
I have numerous third party applications...to name the two important ones,
most of them are video effects from New Blue FX and the other ones are just like converters etc.
I have had no problems with them in the beginning when I upgraded to Mavericks and
certainly no problems before Mavericks. Now all of a sudden, every time I try to use
these applications, it keeps saying that I am running on trial version and that I need
to activate the product with the activation code. This has never happened before and
it certainly has not got to do with a certain app as it is happening with all my applications
that require an activation code. I have to keep activating the apps everyday so that I can
use them and it is becoming really annoying and I don't know how to fix this.
I am sure it is something simple as my computer has been absolutely GREAT since
I have updated to Mavericks. Everything has been so much faster and just amazing until
this new problem. This is the only problem I have. I have checked and I have done ALL updates.
I am a video editor and I use Adobe Premiere Pro CS6 and these continuous activations are
really not helpful for me when I am trying to concentrate and use my effects.
But like I said, it cannot be just the effects I use for adobe as applications that
are not associated to adobe at all are being affected as well.
If you guys could help me, it would be greatly appreciated!
I am really desperate! By the way, I am working on an iMac with Mac OSX Mavericks 10.9.5.
Thank you so much!
Jess

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to pass parameter value to third party application - silver light

Similar Messages

Maybe you are looking for