How to pass select option value to function module while using service call

Hi,
I have select-option in my WD application. To collect data based on user input im using service call. How to pass this select option values to my RFC.
rgds
sudhanshu

Hi,
Thank s for your reply. In fact im doing similar with following variation:
i) collected range values using get_range* method.
ii) separate low and high values as:
read table <field2> index 1 into wa_range.
vert2_low = wa_range-low.
vert2_high = wa_range-high.
(Please note that in RFC I have taken two importing parameter as s_vert_lo and s_vert_hi)
iii) Now setting these RFC attribute as:
lo_el_importing->set_attribute(
 EXPORTING
 name = `S_VERT_LO`
 value = vert2_low ).
and
lo_el_importing->set_attribute(
 EXPORTING
 name = `S_VERT_HI`
 value = vert2_high ).
iv) In RFC im having my query as :
select <fld list> from BUT000 into table itab where vertical in r_vert.
Here, r_vert is a range defined as:
ranges r_vert for <fld refrence>
r_vert-sign = 'I'.
r_vert-option = 'BT'.
r_vert-low = S_VERT_LO.
r_vert-high = S_VERT_HI.
append r_vert.
Issue here is with ranges. if im passing both low and high values it is fine but if only low value being passed it is not giving me any record.
Please suggest.
Rgds
Sudhanshu

Similar Messages

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

Passing SELECT-OPTIONS value to Function Module

Hi,
I need to pass select-options value to a function module.
Code is like the following:
SELECT-OPTIONS seltab FOR object-type.
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
I have found a similar problem in the SDN forum: How to pass select-options parameter to FM?
However, that could not help me much in solving my problem.
So far I have tried to created a structure in DDIC with the following components for the select-options:
SIGN - BAPISIGN
OPTION - BAPIOPTION
LOW - ZBWOBJECTTYPE (my type)
HIGH - ZBWOBJECTTYPE (my type)
and subsequently a table type for this structure which is specified in the "Import" tab of my function module.
Unfortunately, when I ran the program a runtime exception occured (CALL_FUNCTION_CONFLICT_TYPE).
Could anyone please help me on this issue?
Thanks in advance.
Regards,
Joon Meng

Hello Joon,
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
You have defined SELTAB as a SELECT-OPTION.
So when you pass only SELTAB, the header line is transferred to the FM. When you pass SELTAB[] the whole table(range) is passed.
It is similar to the concept of an internal table with header line.
Hope i am clear.
Anyways how have you defined result_tab and sel_tab ?
BR,
Suhas

How to pass select-option variable in function

hi ,
select-option : s_akont for KNB1-akont OBLIGATORY.
i have to pass s_akont in function without using
s_akont-low & s_akont-high.
rightnow i am passing like s_akont but it is giving me a error :
s_akont is followed by niether by an internal table nor by a value list.
what should i write.
regards
raj

Hello Raj
I assume that you want to import your select-options into your function module(s). Since select-options are, by default, itabs with header lines you have to pass your select-options as following:
CALL FUNCTION 'Z_...'
TABLES
it_selopt = s_akont[].
The TABLES parameter it_selopt could be of type ANY or better of type TABLE.
If you want to use generic select-option structure you can use RSDSSELOPT and the table type TT_RSDSSELOPT. In this case you would need to copy your select-options from s_akont to a generic type s_generic (of type RSDSSELOPT).
Regards
Uwe

Passing select-options value in method

How to pass select-options value in method ?
Example:
Select-options: carrid for spfli-carrid.
class cl_myclass implementation.
select carrid connid from
spfli where carrid in carrid.
endclass.
Thanks

Hello Anee
The coding of this functionality is quite simple:
REPORT zmy_report.
DATA: go_myclass   TYPE REF TO zcl_myclass,
           gd_repid         TYPE syst-repid.
PARAMETERS:
p_bukrs   ...
SELECT-OPTIONS:
o_kunnr ...
START-OF-SELECTION.
gd_repid = syst-repid.
CREATE OBJECT go_myclass
    EXPORTING
      id_calling_program = gd_repid.
And that's how your CONSTRUCTOR method should look like:
METHOD constructor. " IMPORTING parameter id_calling_program
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
    CURR_REPORT = id_calling_report
TABLES
    SELECTION_TABLE = me->mt_selopts.
" NOTE: define mt_selopts as instance attribute of table type RSPARAMS_TT
ENDMETHOD.
Finally you have to extract the parameter and select-options from MT_SELOPTS.
Regards
Uwe

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How to Pass Select-options Single values as Parameter value to Method ?

Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thanks

hi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
   WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
   THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

HOW TO PASS SELECT-OPTIONS PARAMETER TO A FUNCTION MODULE.

Hi friends.
HOW DO U PASS A SELECT-OPTIONS PARAMTER TO A FUNCTION MODULE AS ITS IMPORT PARAMETER(IN MY CASE rfc fM) .
Really urgent!!!
thanks to one and all

Hi,
If you are passing a single value, its better you take it from s_option-low or s_option-high (select options).
Else if you are passing values to the FM in a loop for all select option values, then better you declare an internal table with type WSELKUNNR.
get low & high fields from each row & pass them.
It will make you clear when you check out your select options in debug mode by entering different combinations of inputs.

How to use select-options in the function module of import parameter ?

Hi ...
   I have created a BAPI and tested in SWO1 tcode , by giving the single value for an company code ( BUKRS ) , it executed properly .
Same thing is working after implementing in a program .
so now it is working for fetching a single company code details .
My requirement is : I want to use select-options in program as well as in function module IN IMPORT PARAMETER.
Program :
REPORT ZTEST.
TABLES : T001 , ZBAPI_STR .
TYPES : BEGIN OF TY_ITEM .
          INCLUDE STRUCTURE ZBAPI_STR .
TYPES : END OF TY_ITEM .
DATA :WA_ITEM TYPE TY_ITEM ,
      ITEM LIKE STANDARD TABLE OF WA_ITEM INITIAL SIZE 0 .
PARAMETER : BUKRS TYPE ZBAPI_STR-BUKRS.
call function 'ZBAPI_FMT001'
exporting
    bukrs         = BUKRS
IMPORTING
RETURN        =
tables
    itemtab       = ITEM
IF ITEM IS NOT INITIAL .
LOOP AT ITEM INTO WA_ITEM .
    WRITE : / WA_ITEM-BUKRS , WA_ITEM-BUTXT , WA_ITEM-ORT01 , WA_ITEM-LAND1 .
ENDLOOP.
ENDIF.
FUNCTION MODULE :
FUNCTION ZBAPI_FMT001.
""Local Interface:
*" IMPORTING
*"     VALUE(BUKRS) TYPE EFG_TAB_RANGES
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*"      ITEMTAB STRUCTURE ZBAPI_STR
SELECT BUKRS BUTXT ORT01 LAND1 FROM T001 INTO TABLE ITEMTAB WHERE BUKRS = BUKRS .
ENDFUNCTION.
Regards
Deepa.

I have given a similiar example which i did
Declare a
Table type:Z_TT_PONUM
Short text : Select options PO Number
in SE11 tcode with row type eg: Z_ST_PONUM
create a structure (this will be the row type)
Structure          Z_ST_PONUM
Short text         Select Options Field PO number
Compenent Compent type
SIGN       BAPISIGN      Inclusion/exclusion criterion SIGN for range tables
OPTION       BAPIOPTION      Selection operator OPTION for range tables
LOW       EBELN                      Purchasing Document Number
HIGH       EBELN                      Purchasing Document Number
In the function module import
give as
I_PO_NUM     TYPE     Z_TT_PONUM     opt pass value Select options PO Number
Hope this is exactly what you want to know.
So you create a structure simliar to mine but the low an high whould be your component
then a table type and then include that in the BAPI.
Then pass your select-option value to this BAPI when you call this BAPI in the program

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
 bukrs TYPE bukrs,
 werks TYPE werks_d,
 matkl TYPE matkl,
 END OF t_tab.
DATA: w_tab TYPE t_tab,
 i_tab TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

How to get select-options type fields in module programming

i need to get ranges type of fields ( like we use select-options in reports) in module prgrming..im only gettin single entry field (like we use in paramenters)...how to get it like this
field1 ___ to ___ ->
field2 ___ to ___ ->
Thanx,
Naveen Vishal

Hi,
report zrich_0006 .
tables: mara.
Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
p_rad2 radiobutton group grp1,
p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
s_matkl for mara-matkl,
s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
Create Screen 100 with a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.

How to pass a SELECT-OPTION to a FUNCTION-MODULE

Hi forum:
          How can i pass a selection-option like an input parameter of a function-module?. Put one example in the answer, please.
          After pass this value i want to put this into an IN select condition.
   But for i only need know how to pass this value
thnks
Josué
Thnks
Josue Cruz

Hi Rich.
   this is a little example of my code.
   DATA: wa_bukrs TYPE bkpf-bukrs,
              wa_budat TYPE bkpf-budat,
              wa_gjahr TYPE bkpf-gjahr.
   SELECT-OPTIONS: se_bukrs FOR wa_bukrs OBLIGATORY,
                se_gjahr FOR wa_gjahr OBLIGATORY,
                se_budat FOR wa_budat OBLIGATORY.
HERE i can to put the call to the function.
Thnks

How to pass Selection screen values to another program's selection screen

Hello,
I have a requriement where in which i need to pass the selection screen values (say list of pernrs) and few others of one program to selection screen of another.
One option that i came across is using Submit. But am unware how to pass only the selection screen values (there wont be any data processing or filtering). Just the values of one prgm's selection screen are to be sent to another.
Thanks
RK

prog1.
data:lt_params type table of RSPARAMS.
data:wa like line of lt_params.
parameters:pa1 type sy-datum.
select-options:so1 type sy-dtaum.
wa-SELNAME = 'PA2'.               "Seletion screen field name
wa-KIND     = 'P'.                    "P-Parameter,S-Select-options
wa-SIGN     = 'I'.                    "I-in
wa-OPTION     = 'EQ'.               "EQ,BT,CP
wa-LOW     = pa1.                    "Selection Option Low,Parameter value
append wa to lt_params.
loop at so1.
wa-SELNAME = 'SO2'.               "Seletion screen field name
wa-KIND     = 'S'.                    "P-Parameter,S-Select-options
wa-SIGN     = 'I'.                    "I-in
wa-OPTION     = 'EQ'.               "EQ,BT,CP
wa-LOW     = so1-low.               "Selection Option Low,Parameter value
wa-HIGH     = so1-high.               "Selection Option Low,Parameter value
append wa to lt_params.
endloop.
CALL FUNCTION 'SUBMIT_REPORT'
EXPORTING
    report                 = 'ZPROG2.'   "report name of ur tocde
    RET_VIA_LEAVE          = ''            "IF 'X' returns to the called program after execution
    SKIP_SELSCREEN         = 'X'       "If 'X' selection screen of called program is not displayed
TABLES
   SELECTION_TABLE        = lt_params       "Contains values to the selection screen
EXCEPTIONS
JUST_VIA_VARIANT       = 1
NO_SUBMIT_AUTH         = 2
OTHERS                 = 3
Prog2.
parameters:pa2 type sy-datum.
select-options:so2 type sy-dtaum.
write pa2.
skip 1.
loop at so2.
write:so2-low,so2-high.
skip 1.
endloop.
Edited by: Keshu Thekkillam on Aug 20, 2009 3:22 PM

How to pass selection screen value to LDB dynamic field.

Hello everybody,
In my program, I am using standard LDB(PSJ) for getting data. And there is a requirement that I have to display some dynamic fields on my selection screen like plant , person responsible ( which are mandatory also ) etc. and inside the program I have to fill those dynamic fields for which the user has entered the value in selection screen.
Could you please tell me how to pass some of selection screen values to ldb dynamic fields before GET statement.
Thanks !!!
Regards,
Mitra

>
Pavan Bhamidipati wrote:
> Hi,
>
>
I have to fill those dynamic fields for which the user has entered the value in selection screen.
>
>
> This means that the user is going to enter the values in the selection screen for the dynamic field values so
>
> SET PARAMETERID 'XYZ' FIELD p_field.
>
> where p_field is a parameter on the selection screen
>
> Regards
> Pavan
You can capture the values selected through the dynamic selections using some of the functions modules below, just search the forum for the below FM's, perhaps you can find some sample code
FREE_SELECTIONS_EX_2_RANGE
FREE_SELECTIONS_EX_2_WHERE
FREE_SELECTIONS_RANGE_2_EX
FREE_SELECTIONS_RANGE_2_WHERE
FREE_SELECTIONS_WHERE_2_EX
FREE_SELECTIONS_WHERE_2_RANGE

How to pass select option value to function module while using service call

Similar Messages

Maybe you are looking for