How to pass table values in Create Bapi Wrapper

Hi All,
Am using create BAPI Wrapper in that how to map the fields inside BAPI Import Structure .
Thanks&Regrads,
Arun

Hi,
Am using standard RFC " QIBP_INSPCHAR_SETRESULT " for creating result recording in SAP QM. And BAPI_INSPOPER_GETDETAIL for getdetail i want to create BAPI wrapper for these 2 i already created BAPI wrapper for get detail . I dont know how to create Create BAPI wrapper.
In QIBP_INSPCHAR_SETRESULT am passing inupt
INSPLOT      LIKE         QALS-PRUEFLOS
INSPOPER     LIKE     QAPO-VORNR
INSPCHAR     LIKE     QAMV-MERKNR
INSPSAMPLE     LIKE     QASV-PROBENR
CHAR_RESULT     LIKE     BAPI2045D2
so i want to know how i can pass    1 . CHAR_RESULT structrue values
                                                           2. INSPLOT,INSPOPER,INSPCHAR again repting inside CHAR_RESULT so how to map these
                                                                in SDOE_WB
Pls explain how to create BAPI Wrapper for this and how to map details.

Similar Messages

How to passing lowercase values to RFC/BAPI using webdynpro for JAVA

Hi Exerts,
When we sending values to RFC/BAPI through webdynpro (JAVA), the values are sent in capital (uppercase) letters to ECC.
So if we fill xxxx, it is send like XXXX. Why? and how to avoid this?
Thanks in advance,
Joeri

Hi,
There could be two possibility if you are storing this value in ABAP table.
1. You are entering value in UPPERCASE in your webdynpro application.
2. The data stored in ABAP table, converts value in small to upper case.
1. Can you tell me how you are passing this value, is user entering value in some input field which is binded to some context and this value are you passing to RFC/BAPI...???
Or else before passing value to RFC/BAPI you can use toLowerCase string function and the npass this value to RFC/BAPI
e.g String name = wdContext().currentContextelement().getName().toLowercase();
Now pass this name to RFC/BAPI is should go as lowercase only..
This is from webdynpro java side..
2. If you are storing this value in ABAP table, check the domain/type of variable in ABAP table for which you are storing the value. Ask ABAPper, so that this value are stored in small case letter.
There is one tick in domain which you need to remove so that it stores in lower case. I dont have exact information but you can consult this with ABAPer.
Hope this information helps guy ..!!!!
Regards,
Jigar

AIX 5.2 : how to pass password value while creating a user on AIX server

Hi ,
Test connection is successful with AIX server , I can successfully create a user on AIX server, with defualt password.
I am not passing the any password value still some default value is being populated for the user...
In AIX while creating the user , use get force to set the password...
But while configuring the schema for AIX adapter ...if password attribute is given then it will give the error
as invalid attribute...while creating a user if password value pass...
how to set the password for the user..what attribute need to set for the password .
thanks ..

The default password might be the IdM account password of the user you are trying to provision. You don;t need to keep password in the resource schema. Just set password.password and password.confirmPassword and select AIX resource for password reset. Check the workflow-form-views document for more information on password view.

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass a value to a bind variable in a query report in oracle apex

Hi Guys,
I have requirement to send weekly reports via email to some users. The users should receive their own records in the report. The user details is stored in a table. What I am planning to do is to create a report query in oracle apex to generate the report and then run a function/procedure via a scheduler to email the report to respective users. Now my query is ............. is it possible to pass a value (user name) to the report query to pull records of only that user? I know we can have bind variables in the report query but I have no idea how to pass a value for bind variables from a function/procedure.
Can anyone help me on this issue or suggest a better approach?
Thanks,
San

You need to use dynamic sql
But please keep in mind that since you're using Oracle you may be better off posting this in some Oracle forums
This forum is specifically for SQL Server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Passing table values from one webdypro screen to the next in BPM flow

Hi,
I have a BPM scenario where in User 1 will be entering data on a java webdynpro view in the form of a table. The user 1 should be able to edit contents of the table.
These set of values in the table from User 1 needs to be passed to User 2 through BPM. The User 2 should be able to read the values edited by User 1 in the table.
Please could you suggest how we could map the table attribute?
With respect to Context Elements, I have a Node created for the table. But, the data doesnot seem to pass from User 1 to User 2.
Any suggestions on this would be extemely helpful.
Thank You.

Hi,
Please follow the below mentioned steps:
Create a Human Activity containing the task(WebDynpro Task) to edit the table values.
Create a data context of type (Context of the table node used in the Webdynpro task).
Map the output of the human activity to the input of the data context.
Create another human activity that contains the task to read the values of task1
Assign this task to User 2
Map the output of data context with the input of the second human activity.
Regards,
Gayathri

"How to pass classification characteristics while creating batch" ?

Hi,
    I am using FM's BAPI_BATCH_CREATE/CHANGE while creating/changing batch I have to maintain classification data aswell.But in FM docu i saw as shown below
1.Create the classification of a batch in the background (object characteristics only)
2. If the batch is to be classified, you must specify a class in the BatchControlFields parameter. Only single classification is possible.
According to above statments I have passed class name in Batch Control Fields but I am unable to find " How to pass classification characteristics while creating batch". Please tell me how to pass classification characteristics in background?
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hi, You can update classification for a batch using the following code.
But first, you'll need to find out that the batch management is cross-plant or plant dependant.
If it is cross plant then plant(WERKS) is not part of the key to BAPI_OBJCL_CONCATENATEKEY.
CLEAR: objectkey, objectkeytable, objectkeytable[],
           allocvaluesnumnew, allocvaluesnumnew[],
           return.
    objectkeytable-key_field = 'MATNR'.
    objectkeytable-value_int = matnr.
    APPEND objectkeytable.
    objectkeytable-key_field = 'CHARG'.
    objectkeytable-value_int = charg.
    APPEND objectkeytable.
* Only if Batch management is Plant dependant
    objectkeytable-key_field = 'WERKS'.
    objectkeytable-value_int = werks.
    APPEND objectkeytable.
    CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
      EXPORTING
        objecttable    = objecttable
      IMPORTING
        objectkey_conc = objectkey
      TABLES
        objectkeytable = objectkeytable
        return         = return.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from ="characteristic value goes here".
    APPEND allocvaluesnumnew.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from = "characteristic value goes here".
    APPEND allocvaluesnumnew.
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
      EXPORTING
        objectkey                = objectkey
        objecttable              = 'MCHA' " MCH1 in case of cross-plant batch management
        classnum                 = classnum " Classification class number, as used in MSC2N
        classtype                = classtype " Classification class type, as used in MSC2N
*   STATUS                   = '1'
*   STANDARDCLASS            = STANDARDCLASS
*   CHANGENUMBER             = CHANGENUMBER
*   KEYDATE                  = SY-DATUM
*   NO_DEFAULT_VALUES        = ' '
* IMPORTING
*   CLASSIF_STATUS           = CLASSIF_STATUS
      TABLES
        allocvaluesnumnew        = allocvaluesnumnew
        allocvaluescharnew       = allocvaluescharnew
        allocvaluescurrnew       = allocvaluescurrnew
        return                   = return
* Do not forget to commit, otherwise changes would not take effect.
commit work.
Regards,
Hashir Ahmed

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to pass table data to brf plus application through abap program

Dear All,
i have a question related to BRF Plus management through abap program.
In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
And my question is
1) How to pass fields to BRF Plus application from abap program.
2)How to pass Table data to BRF Plus application from abap program.
3)How to pass Structure data to BRF Plus application from abap program.
4)How to get the result data from BRF Plus application to my abap program.
And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
How do i get the code automatically when calling the function in brf plus application.
Regards
venkata.

Hi Prabhu,
Since it is a Custom Fm i cant see it in my system.
Look if u want to bring data in internal table then there could be two ways::
1) your FM should contain itab in CHANGING option , so that u can have internal table of same type and pass through FM,
2) read values one by one and append to internal table.
Thanks
Rohit G

How to Pass table-structure-fields data to BRF PLUS Application

Dear Eperts,
i have a question related to BRF Plus management through abap program.
In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
And my question is
1) How to pass fields to BRF Plus application from abap program.
2)How to pass Table data to BRF Plus application from abap program.
3)How to pass Structure data to BRF Plus application from abap program.
4)How to get the result data from BRF Plus application to my abap program.
And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
How do i get the code automatically when calling the function in brf plus application.
Regards
venkata.

Hi Venkat,
As said by Jocelyn Dart, you need to go through BRF+ tutorials.
-->You can see a on of the tutorial from the below link
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/50879cee-f9b5-2e10-039e-b2d6c4b10e6b

How to Pass Click Value to DB using Java

How to Pass Click Value to DB using Java and display tat
clicked value row data in flex
i have created connection with Sql Server using java and drew
pie chart from values fetched from XML file created by Java
wat i need is when i click pie chart region (widget) i should
display a alert by giving value of particular widget name and Value
from Database and display in Flex Alert

Use AddResource to add Javascript in your BackingBean Code and pass the value to your javascript code.
JSCookMenu and other dynamic adding of javascript to a JSF-JSP page is done using AddResource....

How to pass the value to "Assignment" when submit the program RFITEMGL?

Hello friends,
I want to submit program RFITEMGL (t-code FBL3N) with some screen fields, some fields are OK to fill such as u201COpen at key dateu201D， u201CG/L accountu201D and u201CCompany codeu201D。 But for the field "Assignment" (It will appear after cilck Dynamic Selection), I don't know how to pass value to it.
Could you help me about how to pass the value to "Assignment" when submit the program RFITEMGL (t-code FBL3N) ?
Thanks a lot!

Hi,
Well you can create a small BDC.
Regards,
Harsh Bansal

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

How to pass a value to the export parameter for a method (public instance)?

Hello,
I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
Thanks in advance,
Ranjini

Hi,
"class definition
class lcl... definition.
public section.
method m1 imporitng par type ref to data. "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
endclass.
"in program
data: r_lcl type ref to lcl...
create object r_lcl.
call method r_lcl
exporting
par = "pass any reference variable here
Regards
Marcin

How to pass table values in Create Bapi Wrapper

Similar Messages

Maybe you are looking for