How to pass the selected table row data from popup to source view
Hi ,
I have requirement of passing the data from popup view to source. , searching some data in popup view and displaying in table,
Like i am passing some input and click search button will display the data in table, when select any of the row in the table and click on the another button , i should be able to pass the select row to the source view and also should close the popup.
When i implement , In the popup windiw, when i enter the customer no, and click on search button, it is closing the popup itslef. not able to see the data in popup.
Can u tell me what is that soultion.
Regards
Vijay
Hi Harsimran
Thanks for the reply,
1) Source view
In "Source View" i have input field called Customer_no. But, the end user will not have any idea , what customer no to enter. so i am searching the customer no in the popup view.
1) Customer_no( This is an inputfiled , to get the customer no from the popup view)
2) Get Customer NO( This is a button to call the popup view)
"Get Customer NO" This button action will open the popup view.
In this popup, i have
1) Input field (To enter the search term)
2) Search (To seach the customer no based on the search term)
3) Table ( To display the search data)
4) Button in Table tool bar called "Select" .( To close the popup view after selected the required data in the table to pass it back to the source view).
so in the popup view what happening is, when i click on the search button itself , it is closing the popupview by transfering the first row of the tbale ,with out select the required row in the table.
i need to close the window after click on the "Select" button in the toolbar , after selected the required row data to trasfer in the table.
Can u pelase tell me what are the modifcations i need to do it.
Regards
Vijay
Similar Messages
-
How to transport/move a table with data from development to Test to Production
Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
SriHi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek -
How to Customize the Message "No Row Returned" from a Report
Hi,
I've been trying to customize the Message "No Row Returned" from a Report.
First i followed the instructions in Note:183131.1 -
How to Customize the Message "No Row Returned" from a Report
But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
So i followed the "fix" in the document above and now my output is,..
"Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
So i search in Metalink for the above and come up with,...
Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.
-
How to download the custom Tables to xls from the system?
Hi
How to download the custom Tables to xls from the system?
VijayHi,
Goto SE11, in the table name field give Z*, and click on display. You will get the list of Z tables.
Regards,
Prabu -
How to pass the internal table data to smartforms
Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = T_SSFCTRLOP
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = T_SSFCOMPOP
USER_SETTINGS = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
LT_PRDLBL = LT_PRDLBL1
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PMNehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
<_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks, -
How to Pass the internal table data?
DearAll,
How to pass the Data of one internal table on a 1.html page to another html page for output, in BSP Application.
regards.Hi ,
In the onInputProcessing event of the first page , write the following code...
call method NAVIGATION->SET_PARAMETER exporting
name = 'it_filt_cur'
value = it_filt_cur.
Here it_filt_cur is internal table.
NAVIGATION->GOTO_PAGE('next.htm').
In the next page , you can make the internal table as auto in the attributes.
Since you have made the itab as auto transfer , you can directly access the itab in the initialization event of the next page if it is stateless.
Regards,
Laxman Nayak.
Message was edited by: Laxman Nayak -
How to pass the internal table defined in program to ALV
Hi Friends,
I have a doubt regaring the ALV's,
How can we pass the internal table defined in the program to ALV by not filling the attribute (I_STRUCTURE_NAME) in the REUSE_ALV_LIST_DISPLAY.
I have tried many ways but unable to pass the structure of the internal table. I am getting the error message "Field Catalog Not Specified......" and its terminating and when i am giving the I_STRUCTURE_NAME = 'INTERNAL-TABLE-NAME' then its displaying a blank screen with all the tool-bars and icons...(No output of internal table data is seen on the screen) .
and when i am passing the DDIC table or structure ( for eg. LFA1) to I_STRUCTURE_NAME then its displaying with any error.
Plaese help in resolving this problem....
Regards
Pradeep GoliHi,
Check this thread which gives example of ALV. This will give you an idea.
Interactive ALV
ashish -
How to pass the selected Pernr from Portal to WDA iview dynamically ?
Hi ,
How we can pass the selected Pernr from portal page to the webdynpro application dynamically?
Ex:
If a manager select a employee id of an employee then it should display all the related document regarding the employee in the ivew.
For that we need to pass the employee id(Pernr) to the iview.How it is possible.
Thanks,
DeepikaHi Deepika,
Try using portal events. You will have to register and handle the required portal event in your WDA application.
[Portal Events Help|http://help.sap.com/saphelp_nw70/helpdata/EN/03/0048413e466e24e10000000a155106/frameset.htm]
In this link, navigate to Integration->portal integration->Portal Events.
Also go through some sample applications:
WDR_TEST_PORTAL_EVENT
Regards,
Reema. -
How to pass the selected data of a table to SAP(R/3)
Hi all,
I have a table with 2 colums and 10 records.Now i want to send the selected record to the R/3.
Once the user checks the checkbox i retrivred the colum values of that row into a string array.
and i added all the string arrays to an AbstractList.
Now in function module it is giving as setT_Operations(AbstractList)
but it is giving error..can u plz tell me how the function module understands the individual String arrays
Regards
Padma NHey try to accept the values of a column as import parameters to a BAPI and you can send the data.But this will work out for a single data.
In the BAPI insert the data making use of insert command.
ITAB-COLUMN1 = IMPORT PARAMETER 1.
ITAB-COLUMN2 = IMPORT PARAMETER 2.
INSERT INTO VALUES ITAB.
If you want to insert multiple records then you have to change the cardinality of the node.And add the node elements to the node.If any doubts then do reply. -
How to Pass the Internal table of a report to Smart Form
Hi Experts,
I have one report in which from selection screen i am getting the values from the users, and upon that values i am filling data in to the internal table.
Now i want to pass that internal table data to the smart form
and print that data in the smart form.
So could you pls give me some pseudo code or any steps to achieve it.
Thanks & Regards,
DSHi DS,
First of all you need to create a SF and then need to call the FM generated by the FM in your report.
In the SF in the form interface>tables tab>mention the name of the table and its type structure.
Pls note that a new structure has to be created as the same type of your internal table which holds the data.
And the import and export parameters as just the same as in a FM.
Now after you create and activate your SF a FM will be generated (wen u execute your SF you will be taken to this SE37 screen with the name of FM so no probs..)
You can call this FM in your report. Hope this helps.
Ex:
say itab has your final data, and you also want to export a variable var1 to the SF.
after your normal report operations end, call the FM and pass on these data.
say your FM name is FM1.
call function FM1
exporting
var1 = var1
tables
itab1 = itab1.
pls note that in the SF also i gave the same names, it is not mandatory to give the same names.
and as you want to print a table in the smartforms, you need to create a table in the smart forms and then display the data which is quite simple.
Hope this helps...
if you need any further explanations, pls revert...
Regards,
Narendra.
Reward points if helpful!!! -
How to pass the JCO Table and Structure in a collection List to frontEnd
hi,
I have a BAPI which is returns me a Table and a structure. As i have used JCO I will receive it in JCO Table and JCO Structure. Now the question is that how I should pass both these of these using a collection to the frontend for displaying the data from it.
Thanks' & Regards,
SamirHi Samir,
As you are trying to pass the Table and the Structure in the form of collection to the JSP page, you can create a javabean with the structure similar to that of the table/Structure.
Lets assume you have a table called Employee with Emp_Name, Emp_Age, Emp_Sal as three columns, create a java class by name Employee which implements Serializable and attributes as Emp_Name, Emp_Age and Emp_Sal. Generate the setters and getters for the same. In your EJB code, create an instance of this Employee class and set the attributes and save it in a HashMap in the form of key value pair, Value being your Employee class instance and key be your Employee Name. Return the HashMap in your EJB code.
Use the HashMap in your JSP. Get the Iterator for the HashMap and Loop through the keys to get the values.
Hope this helps.
Regards,
Rekha Malavathu -
Hello Expert,
I wanted to know is there any way through which we can dynamically pass the table name in IMPORT condition.
For e.g.
DATA : PCLT TYPE DD03L-TABNAME.
DATA: SET_RELID TYPE T52RELID-RELID.
DATA: key TYPE PCLKEY.
DATA: text_version TYPE PVRSN.
DATA: BEGIN OF ptext OCCURS 132.
DATA: line(132).
DATA: END OF ptext.
SET_RELID = 'TX'.
PCLT = 'PCL1'.
KEY = '00001000004005 9999123119960101000'.
TEXT_VERSION = '01'.
IMPORT TEXT_VERSION PTEXT FROM DATABASE <PCLT>(<SET_RELID>) ID KEY.
If i use this then it gives me error message "The Dictionary structure or table "<PCLT>" is either not active or does not exist."
Kindly help me in this matter.
Thanks
SrikanthHi Srikanth
I dont know if there is another solution, but this is what i did using a dynamic subroutine, please check it
just add this lines to your code
DATA: prog TYPE c LENGTH 8,
mess TYPE string,
sid TYPE string,
wrd TYPE string,
dir TYPE trdir,
OFF(3).
DATA: lt_code TYPE TABLE OF rssource-line.
DATA: ls_code TYPE rssource-line.
perform call_import using pclt set_relid key.
form call_import USING p_pclt p_set_relid p_key.
ls_code = 'PROGRAM SUBPOOL.'.
append ls_code to lt_code.
ls_code = 'form get_text tables ptext using p_key changing text_version.'.
append ls_code to lt_code.
ls_code = 'IMPORT text_version ptext from database'.
append ls_code to lt_code.
concatenate p_pclt '(' p_set_relid ')' into ls_code.
append ls_code to lt_code.
ls_code = 'id p_key.'.
append ls_code to lt_code.
ls_code = 'endform.'.
append ls_code to lt_code.
generate subroutine pool lt_code
name prog
message mess
SHORTDUMP-ID sid
WORD WRD
OFFSET OFF.
IF SY-SUBRC EQ 0.
perform GET_TEXT IN PROGRAM (prog) tables ptext
USING p_key
CHANGING text_version .
ENDIF.
endform.
Hope this help
Regards
MC -
Drop Down - how to pass the selection
Hi Experts,
I have created a drop down in a web application using the option characteristic binding. I need to pass the value that the user selects in this drop down to a Bex exit variable, for use in the variable logic. Please tell how this can be achieved.Hi
R u telling abt Bex OR BPS variables
if Bex variable then u can write the code in Exit where u can read the variable value when u select something in drop down then manupulate it or assign some value to other variable on the basis of some business logic..
If BPS variable then u will have to write a function module where u need to read the varaible value using that function module and then maupulate it...
Thanks
Debasish -
Please let me know how to write the Query to fetch data from tables
Hi Folks,
Please let me know how to get the data from different tables using the functionality SQ03,SQ02 and SQ01 .
Helpful answers will points awarded.
Regards,
Ram.Dear Ram,
Please find the below link which gives in detail with screen shots.
[SAP Query|http://media.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf#search=%22CREATE%20REPORT%20USING%20SQVI%20%2C%20SAP%22]
Thanks
Murtuza -
How to read a alv grid row data from standard program
Hi All,
I am working on transaction LBK1. Actually when you will open this transaction in the left hand side it will show you the data in tree. When you click on a notification node it will show the relevant data in right side. In which there is a operation tab . In this tab the data comes in alv grid. If user selects a row then I have to get that selected row value. There is also a toolbar above on the tree side. There are some buttons which execute our implementation class where I can put the code.
Can anyone please help me out? How I can read that selected row in our class/method?
Thanks in advance.
Best Regards
RituSetting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similiar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows fronm the table. In the examples below the grid table is named gi_sflight.
Data declaratrion:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a valid line'.
EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
exporting
it_index_rows = gi_index_rows.
ENDIF.
Maybe you are looking for
-
How to generate a list of Devices based upon an eDir group
Is there a way for us to generate a report/query of devices (we need model, etc) where the calculated user for each device is a member of an eDirectory group? Basically, we need to generate a list of machines in our "HR" department or "Finance" depar
-
How to run JavaFX Jar with JRE 7 on MAC OS Lion 10.7.5 ?
I had java 1.6 installed on my MAC OSX Lion 10.7.5. When I am trying to run that JavaFX application jar java -jar application.jar It always shows a dialog "The application require a newer version of Java Run-time" with download link. Even I have down
-
Ffmpeg installation on Solaris 10 AMD opteron processor
Hi All, I would like to know whether ffmpeg can be installed on Solaris 10 AMD opteron processor. -BR
-
Any way of importing from Access to SQL Server?
I have a huge store of information in Access. But now I'm required to use SQL Server. Is there any way of importing the information from Access to SQL Server by Java programming? Or is there a manual way of doing that? Thank you in advance.
-
How do I save my .muse file as a .html file?
I want to upload the .html file to http://www.directmailmac.com and use it as an email template.