How to pass Valid from and Valid to Dates in CS_BOM_EXPLOSION
Hii Experts,
My requirement is to explode BOM using CMC LDB and generating files for all the remaining months by varying Valid from and Valid to dates. For this I am using CS_BOM_EXPLOSION but it has provision for a single date field.
Can you please guide me how to pass both Valid from and Valid to dates in CS_BOM_EXPLOSION ? And if you can suggest any other alternative, its most welcome...
Regards,
Vikas
Hi Vikas,
There is a tables parameter STBP which is of type CSXGEN.
This structure CSXGEN contains two fields valid from date(DATUV) and valid to date(DATUB).
Is this what something you are looking for?
Regards,
Swarna Munukoti
Similar Messages
-
How are valid-from and valid-to dates set in TRPROD table in APO during CIF
First question:
How are the valid-from and valid-to dates set in the APO TRPROD table?
For example, if I activate a transportaion lane model on March 1, 2008, will the valid-from and valid-to in TRPROD be 20080301 and 99991231?
Or are these dates defined in the model itself? Or in APO config somewhere?
Next question:
Suppose I rerun the model on May 1 2008 to add some records that didn't get added in the March 1 run. But suppose I want to back-date the valid-from of these records to March 1, rather than use May 1 as the valid-from.
Can this be done?
Or is the valid-from always the date of the CIF that creates the TRPROD records?
Please advise.
ThanksHi Srinivas -
Thanks very much for replying so quickly, but your response didn't answer the questions.
Let me try again.
1)
If I run a CIF on March 1 2008 based on a model that will generate APO TLane data, will the TRPROD valid-from and valid-to get automatically set to 20080301 and 99991231?
2)
If the answer to this question is yes, then is it also true that if I run a new set of records in on May 1, 2008 (no duplications with the original set), then the valid-from and valid-to dates will be 20080501 and 99991231.
3)
But if (1) and (2) are both true (if you answer them both "yes", then suppose I want the May 1 record set to have valid-from dates of March 1 (for example, if the May 1 record set includes records that didn't get included in the March 1 set due to an error in selection criteria). How do I get the valid-from to be March 1 when I run the CIF on May 1?
On the other hand, if (1) and (2) are NOT true, then how DO the two dates get set during a CIF ????
Thanks
djh -
How to change dateformat of VALID FROM and VALID TO properties in xml forms
Hi all,
I have created a news using xml form bulider and i have given lifetime for that news ,also displaying the VALID FROM and VALID TO in news.By default it is in mm.dd.yyyy format but i need to display the dateformat as dd.mm.yyyy in show form.Is there any possiblity to change the format in XSLT or any other solutions.
Regards
BalaHi Bala
Check this XML FORMS - Date Format.
Its a quite easy way.
Regards
BP -
Date entered between valid from and valid to it should throw error
HI i have a doubt in the dates see
i have a column for the valid from and valid to date
EXAMPLE
customer cform NO SUBMITTED VALID FROM VALID TO uSER
17 OUIIUYUIY 02.04.2008 03.04.2008 03.12.2008 SAB_BEGUM
WHEN I GIVE the dates in between the period it has to give throw the error
example if i give like as shown below it should pass the error
17 FHGFF2 02.04.2008 03.04.2008 03.06.2008 SAB_BEGUM
now how can i pass and check the the dates, it has to accept ones the date is after 04.12.2008 , in between the period it should throw the error. please help me outhave a look at this:
http://help.sap.com/saphelp_nw70/helpdata/EN/a7/5139ef407a11d1893b0000e8323c4f/frameset.htm
and search for the pre defined events in table maintenance dialog.
generate table maintenance->create a maintenance dialog->Maintaining and changing an existing maintenance dialog ->Extended Table Maintenance Events. -
Valid from and valid to properties under history preservation transform
I have created_dt and last_updated both date columns in source table and also in target table.
Now under history preservation transform for Date columns:
For "Valid from" and "valid to" properties: which column should i pick?
how can i use created_dt and last_updated columns under history preservation?
What is current flag property, should i leave this blank if i don't have any flag "bit type" column like indicator in source or target table.
My Dataflow has:
Source_table -> Qry_Transform -> Table_comparison > history_preservation - > Key_gen - > Target_table.Valid from and Valid to in History Preservation transform deals with SCD (slowly changing dimensions).
In most of the scenarios, Valid From comes from the source (as Effective From date) for which the dimension has a particular value.
Eg:
SALES REP, Region, Effective From
A, California, 01.01.2011
Valid To column in History Preservation is the default value that you provide inside. In case of preserving history of an update, Valid To column of the old record can have the Valid From value of the new record, or one day before that. You have option to set the same in History Preservation. -
Name of the table where can get the two fields Valid-From and Valid-to for
Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
KaisarYou can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM -
Valid from and Valid to are not getting copied to follow up document.
Hi Experts,
I am creating job quote as a follow up document from master quote.All are getting copied from the master quote to job quote,but valid from and valid to dates are not getting copied from master quote,instead it is calculating the date from date profile rules.
But I need to transport the dates from Master Quote to Job Quote.
Please advice.
Thanks,
Adi.Hi,
You need to implement CRM_COPY_BADY for that. Please refer to:
Re: create a new follow up complaint to the earlier completed complaint
Regards,
Nicolas. -
Hi All,
I have one question w.r.t. risk analysis of user while raising a request in ARQ.
I have noticed that, when a user is assigned 2 conflicting roles in a request (with "Valid From" and "Valid To" fields being the same), ARQ shows risk violations properly.
This is quite logical, because user is assigned conflicting roles within the same dates.
In another scenario, if a user is assigned 2 conflicting roles in a request (with "Valid From" and "Valid To" fields being different)
Example:
Time Administration : Valid From=15.06.2014 and Valid To= 31.12.2014
Payroll Administrator: Valid From=20.06.2014 and Valid To= 31.12.2014
ARA still shows as violations (in ARQ)! Though the "Valid From" dates are different.
Logically, user is not assigned these roles at the same time to cause a risk violations. However, system is showing violations.
May I know if validity dates are considered while performing risk analysis in ARQ? If no, then what could be the justification?
Please advise.
Regards,
FaisalRafal,
Thanks for your reply.
Does it mean that all future dates will be considered while analysis?
OR
Does ARA consider these dates?
Regards,
Faisal -
Table containing 'Valid From' and 'Valid To' dates -- tcode SU01
Hi All,
I want to know the Table containing 'Valid From' and 'Valid To' dates -- In tcode SU01 ---Tab Logon Data there are 'Valid From' and 'Valid To' dates. I want to know the table(s) where this info is stored.
thanks
NavedLooks like you have two userids. Login to SDN using your userid that created the post and assign the points. If you don't see the radio button then change your original post to a question.
Message was edited by: Prakash Singh -
How to get the latest and valid BOM item entry from STPO
hi,
may i know with what condition we can get the latest and valid BOM item entry from STPO table?
i have STLNR and IDNRK as a input. But i realized that it would return multiple entry due to the combination of valid-from and valid till date.
can i use stlnr,idnrk and stpoz (with the latet counter) to get the latest and valid BOM entry?
thank you.Hi
You can get the latest BOM either by using the latest valid from date DATUV or latest internal counter STPOZ
Regards
Shiva -
How to create the verify.der file in portal ? valid to and valid from
hi Experts,
am facing the problem in SAP logon method without user mapping but it's having a problem, The problem is create the Transaction iview it's not there . Back end server is not response how to create the Valid TO and Valid From in portal.
Thanks & Regards
ChanduChandu,
1. Start the SAP J2EE Engine Visual Administrator: C:\usr\sap\<SID>\JC00\j2ee\admin\go.bat.
2. Navigate in the left tree panel to Cluster -Server -Services -Key Storage - Runtime TicketKeystore - SAPLogonTicketKeypair u2013cert.
Here you can go ahead and create a new ticket.
Hope that helps.
Cheers,
Sandeep Tudumu -
How to know the balance and validity of internet data in iPad
How to know the balance and validity of internet data in iPad?
Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance. -
How PO validity start and validity end works
In the PO Header (tab Additional data), there are fields: validity start and validity end. The help text states the following:
Start of validity period
Date as of which services can be performed or materials delivered.
In the case of purchase orders:
Start of the period in which the service is to be performed or thematerial delivered.
End of validity period
Date up to which services can be performed or materials delivered.
In the case of POs:
End of the period in which the service is to be performed or thematerial delivered.
I maintained a validity date range 01/01/2007 to 01/10/2007. When i tried to receive the item with posting date 01/15/2007, the system saved the GR without even a warning message that the GR was outside the PO validity date.
How does this field work? Is this standard configuration or does this only work with a user-exit?
I would appreciate any input.
Regards,
Dominiquehi ,
use transaction OMCQ,
set the status of message for M7 163 to error. if this message is not present in the list , then go to new entries and select this message and enter it into the list
after this set the status to "E".
let me know if this works
Regards
Mangesh. -
OBIEE 11g How to pass variable from one prompt to another prompt in dashboard page.
How to pass variable from one prompt to another prompt in dashboard page.
I have two prompt in dashboard page as below.
Reporttype
prompt: values(Accounting, Operational) Note: values stored as
presentation variable and they are not coming from table.
Date prompt values (Account_date, Operation_date)
Note:values are coming from dim_date table.
Now the task is When user select First
Prompt value “Accounting” Then in the
second prompt should display only Accounting_dates , if user select “operational”
and it should display only operation_dates in second prompt.
In order to solve this issue I made the
first prompt “Reporttype” values(Accounting, Operational) as presentation
values (custom specific values) and default presentation value is accounting.
In second prompt Date are coming from
dim_date table and I selected Sql results as shown below.
SELECT case when '@{Reporttype}'='Accounting'
then "Dates (Receipts)"."Acct Year"
else "Dates (Receipts)"."Ops
Year" End FROM "Receipts"
Issue: Presentation variable value is not
changing in sql when user select “operation” and second prompt always shows
acct year in second prompt.
For testing pupose I kept this presentation
variable in text object of dashboard and values are changing there, but not in
second prompt sql.
Please suggest the solution.You will want to use the MoveClipLoader class (using its loadClip() and addListener() methods) rather than loadMovie so that you can wait for the file to load before you try to access anything in it. You can create an empty movieclip to load the swf into, and in that way the loaded file can be targeted using the empty movieclip instance name.
-
How to pass user name and password in openConnection method ?
Hi, Exports,
I am trying to post data from applet to another application which is
protected by network password.
How to pass user name and password when I use openConnection method? In java
doc, this method looks like do not accept these two parameters.
Thanks
----- my code in applet ---------
URL url = new URL("http://127.0.0.1/xml/index.cfm");
URLConnection connection = url.openConnection();
connection.setDoInput(true);
connection.setDoOutput(true);
connection.setUseCaches(false);
connection.setAllowUserInteraction(false);
DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
dos.writeBytes("Content-Type:
multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
dos.writeBytes("Host: "+host+":"+port+"\r\n");
dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
dos.writeBytes("Connection: Keep-Alive\r\n\n");
dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
on: form-data;name=\"xmlDoc\"\r\n\r\n");
dos.writeBytes(buff.toString());
dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
dos.close();
you need to negotiate Authentication in ur applet code...
For example:
If u r using Form based auth u need to send Post a request with j_user_name &
j_password to the action j_security_check. and when server returns back the
cookie
u need to hold it and pass that cookie to the each and every request made to the
protected application.
Basically u need to imitate the browser.
regards
aseem
David wrote:
> Hi, Exports,
>
> I am trying to post data from applet to another application which is
> protected by network password.
> How to pass user name and password when I use openConnection method? In java
> doc, this method looks like do not accept these two parameters.
>
> Thanks
>
> ----- my code in applet ---------
> URL url = new URL("http://127.0.0.1/xml/index.cfm");
> URLConnection connection = url.openConnection();
> connection.setDoInput(true);
> connection.setDoOutput(true);
> connection.setUseCaches(false);
> connection.setAllowUserInteraction(false);
> DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
> dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
> dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
> dos.writeBytes("Content-Type:
> multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
> dos.writeBytes("Host: "+host+":"+port+"\r\n");
> dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
> dos.writeBytes("Connection: Keep-Alive\r\n\n");
> dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
> on: form-data;name=\"xmlDoc\"\r\n\r\n");
> dos.writeBytes(buff.toString());
> dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
> dos.close();
>
> ------------------------------------------
Maybe you are looking for
-
I am sorry nhylo this your answer I hope it will help you
MAC OS iMac There are several versions of the iMac computer. The first two versions (referred to as revision A and revision B) were colored Bondi Blue. The next version (referred to as revision C) was introduced in January 1999 and came in five diffe
-
Self or powered generic USB port, works on every OS except Leopard...
I've got a puzzling one. I just ordered some nice 4 port USB hubs, that run on bus power, or self powered with an AC adapter. First thing I did was plug it into my MacBook, and plug in my external HD and ram drive. They did not mount. So I grabbed th
-
Hi, I would like to understand the follow code : WEEK = TMVL (WEEK, 1 , MONTH) How does it work ? what is the role of MONTH ? Thanks a lot Jacques
-
Hello! How to configure RBDSTATE variant SAP_AUDIT_SEND in this guide (How to handle ack idoc) https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe I understand, that that in field Confirmations to
-
Multilist box with decimal format
I defined a global array of cluster "Test Results" with all the parameters I needed to log and created a user event which triggers when the data needs to be logged. Though I created the pressure flow rate and vacuum flow rate as a double when I write