How to pass XML(Binary) to Server Proxy in ABAP report
Hi,
I would like to schedule server proxy in back ground mode using ABAP report. I already have the payload available in XSTRING(binary) saved in Z table. I know how to convert binary string to XML (using FMs - SCMS_BINARY_TO_STRING).
However, is there any way to pass binaryXML(XSTRING) to server proxy (without converting the paylolad to XML and use SAX/DOM parser to populate proxy input structure ) ?
Not sure, if SET_XML(IF_WS_PAYLOAD) method can be used.
Thank you,
Mallik
Hi Sarvesh,
The pdf has details of ABAP mapping. The example given almost matches the xml file you want to be converted.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use abap-mapping in xi 3.0.pdf
Just in case you have not seen this
regards
Vijaya
Similar Messages
-
How to pass XML data between applications
Hi,
can any one tell me how to pass XML data between applications
Thanks in advance
SudheerSteve,
I tried the code in the http package in the Appendix A section of your book. Each time i try a POST I get a HTTP/1.1 400 Bad Request error from the server. I can successfully do a GET from URLs. I have pretty much copied your code verbatim. Any ideas?
Thanks,
Sunder
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Steven Muench ([email protected]):
See the "Working with XML Messages" section starting on page 242 of my Building Oracle XML Applications. It covers how to Send and Receive XML messages over the web through HTTP GET and HTTP POST as well as specifically Example 6-30 that illustrates how to receive a posted XML message in a servlet and process it.
Hope this helps.<HR></BLOCKQUOTE>
null -
How to pass record Group from Forms with DATA_PARAMETER to Reports Server
How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
ArifHi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product. -
How to pass data between two internal sessions using ABAP memory?
Hi,
How to pass data between two internal sessions using ABAP memory?
It would be fine if you could explain with an example.
And also let me clear about the data passing between two main sessions and two external sessions with specific examples.
Thanks.Hi ,
check the example.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
In this statement, the system does not check whether the structure of the object in memory is compatible with the structure into which you are reading it. The data is transported bit by bit. If the structures are incompatible, the data in the target field may be incorrect.
PROGRAM SAPMZTS1.
DATA TEXT1(10) VALUE 'Exporting'.
DATA ITAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
DO 5 TIMES.
ITAB-BOOKID = 100 + SY-INDEX.
APPEND ITAB.
ENDDO.
EXPORT TEXT1
TEXT2 FROM 'Literal'
TO MEMORY ID 'text'.
EXPORT ITAB
TO MEMORY ID 'table'.
SUBMIT SAPMZTS2 AND RETURN.
SUBMIT SAPMZTS3.
The first part of this program is the same as the example in the section Saving Data Objects in Memory. In the example, the programs SAPMZTS1 and SAPMZTS2 are called using SUBMIT. You can create and maintain the programs called using the SUBMIT statement by double-clicking their names in the statement. For further information about the SUBMIT statement, refer to Calling Executable Programs (Reports)
Example for SAPMZTS2:
PROGRAM SAPMZTS2.
DATA: TEXT1(10),
TEXT3 LIKE TEXT1 VALUE 'Initial'.
IMPORT TEXT3 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT3.
IMPORT TEXT2 TO TEXT1 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT1.
Example for SAPMZTS3:
PROGRAM SAPMZTS3.
DATA JTAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
LOOP AT JTAB.
WRITE / JTAB-BOOKID.
ENDLOOP.
The output is displayed on two successive screens. It looks like this:
and
The program SAPMZTS2 attempts to read a data object TEXT3 from the data cluster "text", which does not exist. TEXT3 therefore remains unchanged. The existing data object TEXT2 is placed in TEXT1. In both cases, SY-SUBRC is 0, since the cluster "text" contains data.
The program SAPMZTS3 reads the internal table ITAB from the cluster "table" into the internal table JTAB. Both tables have the same structure, namely that of the ABAP Dictionary table SBOOK.
Pls. reward if useful..... -
Calling a proxy from ABAP Report
Hi All,
Can any one gimme some idea about calling a XI proxy from ABAP Report.
I need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
Thanks in advance.
Tnx,
Joe.Hi Meetjoe,
We have to design the required interface in PI ,that is used to hold the report data when tigerred a proxy and generate the proxy based on the interface if the Proxy is based on the Outbound side its called client proxy or if the proxy is genereated on Inbound interface we call it server proxy.
need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
In your case its gonna be the client proxy refer the follwing links for your better understanding
For concepts on Proxies:
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To enable Proxy connections:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a
Smaple scenarios on Proxy:
Proxysettings /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxy /people/siva.maranani/blog/2005/04/03/abap-server-proxies
ABAP Client Proxy /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Thanks,
Ram. -
How to use XML on another server?
I need help figuring out how to consume XML from another
domain. It's a domain that is providing search functionality for a
website. The domain indexes my site, and I can "post" searches to
an URL with my search terms URL-escaped. It returns an XML
document. I want to use Spry to consume that XML.
I'm pretty experienced consuming XML and using it in Spry
pages, but to date have not done anything that crosses domains. I
will have access to Perl on the production box that hosts my site,
with a remote chance that I could get PHP enabled. This is a public
web server for a very very large financial company, so my choices
of what can go on a production server outside our firewall are
limited by corporate policy.
What are the basic steps that need to happen? Can someone
bullet-point how this might work from one end to the other? I have
the basic theory down of what needs to happen, but not much else at
this point.
Here is what I understand:
1 - user fills in search form and hits enter
2 - form posts to a Perl script on my box
3 - Perl takes the form variables and appends them to a URL
request to the 3rd party search domain
4 - 3rd party search company returns an xml file
5 - not sure what Perl needs to do here with the xml so that
my HTML page with Spry can read it....it does something, let's just
say
6 - Perl writes out a page, based on a template in my site
that then consumes the XML that is somehow available on my domain
now...
This raises so many questions...like if I save the results
XML on my server, how do I get rid of them after they are consumed
and also how do I prevent other sessions from accessing that "saved
copy" of XML...I know I'm thinking wrong here. That can't be how
it's done...Hence...my question about all this.
Where do I start?
Thanks,
Douguser12004297 wrote:
thank you so much - however on the source database I dropped tables and users- then I did an "alter system switch logfile;" - copied the archivelogs to the / test DRP and loaded the archivelogs and the users and tables were not dropped like i did in source
RMAN> tartup mount
Oracle instance started
database mounted
Total System Global Area 1119043584 bytes
Fixed Size 2227624 bytes
Variable Size 620757592 bytes
Database Buffers 469762048 bytes
Redo Buffers 26296320 bytes
RMAN> CATALOG START WITH '/oradb1/backup';
using target database control file instead of recovery catalog
searching for all files that match the pattern /oradb1/backup
List of Files Unknown to the Database
=====================================
File Name: /oradb1/backup/1_345_819727387.dbf
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /oradb1/backup/1_345_819727387.dbf
RMAN> recover database;
Starting recover at 20-NOV-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=249 device type=DISK
starting media recovery
media recovery complete, elapsed time: 00:00:02
Finished recover at 20-NOV-13
RMAN> alter database open;
database opened
RMAN
Simply making the database aware of the archivlogs does NOT mean rman will determine they need to be used for a specific recovery operation. What all had you done to/with this database prior to this? Keep firmly in mind the effect of any OPEN RESETLOGS. -
How to pass xml data as objects into Database using store procedures
Hi All,
I don't have much knowledge on store procedure,can anybody help how to pass the xml as objects in Database using store procedure.
My Requirement is I have a table with three fields EMPLOYEE is table name and the fields are EMP_ID,EMP_TYPE AND EMP_DET,I have to insert the employees xml data into corresponding fields in the table.
Input Data
<ROWSET>
<ROW>
<EMP_ID>7000</EMP_ID>
<EMP_TYPE>TYPE1</EMP_TYPE>
<EMP_DET>DEP</EMP_DET>
<ROW>
<ROW>
<EMP_ID>7000</EMP_ID>
<EMP_TYPE>TYPE2</EMP_TYPE>
<EMP_DET>DEP2</EMP_DET>
<ROW>
<ROW>
<EMP_ID>7000</EMP_ID>
<EMP_TYPE>TYPE3</EMP_TYPE>
<EMP_DET>DEP3</EMP_DET>
<ROW>
<ROWSET>
So each row values has to inserted into resp fields in the table.
Regards
ManiDo you have a similar structure in your stored procedure ?
In that case you can simply call the procedure from soa using db adapter and do a mapping to assign the values. -
How to pass XML tags in a soapbody parameter having datatype as string?
Hi,
I need to pass XML tags as a String parameter in SOAP:Body.
When I tried send SOAP Request, The SOAP Request was changing < to <
and > to > respectively. Is there any way to ensure that the XML tags (< and >) remain as it is without getting changed.
I also tried to retrieve XML file and stored in a StringBuffer and tried to send SOAP Request but i am still receiving the < and > tags in my SOAP Request.
Pl suggest some alternatives to avoid storing the XML in the form of string and instead directly store the XML into a XML Node so that i can avoid the above condition
Thanks in advance,
gnsinhydHi,
The sample code I used is as follows:
package somepackage;
import javax.mail.internet
import javax.xml.messaging.*;
import javax.xml.soap.*;
import javax.xml.transform.*;
import javax.activation.*;
public class SomeClassName{
// Some namespace declarations
public static void main(String[] args) throws someExceptions{
try
// Create the connection
SOAPConnectionFactory connectionFactory = SOAPConnectionFactory.newInstance();
SOAPConnection connection = connectionFactory.createConnection();
// create a new SOAP message using SAAJ API�s
MessageFactory messageFactory = MessageFactory.newInstance();
SOAPMessage request = messageFactory.createMessage();
// Create a SoapAction header
MimeHeaders headers = request.getMimeHeaders();
headers.addHeader("SOAPAction", "soapaction url");
// Object for SOAP Message parts
SOAPPart part = request.getSOAPPart();
SOAPEnvelope envelope = part.getEnvelope();
envelope.addNamespaceDeclaration("xsd","http://www.w3.org/2001/XMLSchema");
envelope.addNamespaceDeclaration("xsi","http://www.w3.org/2001/XMLSchema-instance");
//envelope.addNamespaceDeclaration("enc","http://schemas.xmlsoap.org/soap/encoding/");
envelope.addNamespaceDeclaration("soap","http://schemas.xmlsoap.org/soap/envelop/");
//envelope.setEncodingStyle("http://schemas.xmlsoap.org/soap/encoding/");
SOAPBody body = envelope.getBody();
SOAPHeader header = envelope.getHeader();
// Now, build the ClaimStorage element in the body for our request
Name somename = envelope.createName("somename");
// � and configure it with the specifics of our request
SOAPElement ClaimStorage = body.addTextNode("somename");
ClaimStorage.addNamespaceDeclaration("xmlns","url");
ClaimStorage.addChildElement(somename).addTextNode("somename");
ClaimStorage.addChildElement(xmlclaim).addTextNode("<XMLTAGS">); <---THE PROBLEM IS HERE
----> THE XML TAGS < > ARE CHANGING TO < AND > MOST PROBABLY DUE TO POST I THINK.
// Save Message
request.saveChanges();
// View SOAP Request
System.out.println("\n Soap Request:\n");
request.writeTo(System.out);
System.out.println();
// Now, create a connection to the HTTP SOAP endpoint
URLEndpoint endpoint = new URLEndpoint("url.asmx");
// Send request, view response. In a real program, we�d process the response envelope programmatically to see if there was a fault, etc.
System.out.println("request =\n" + request);
SOAPMessage response = connection.call(request, endpoint);
// View the output
System.out.println("\nXML Response\n");
// Create Transformer
TransformerFactory tff = TransformerFactory.newInstance();
Transformer tf = tff.newTransformer();
// Get reply content
Source sc = response.getSOAPPart().getContent();
System.out.println("SOAP Body" + response.getSOAPBody());
// Set output transformation
StreamResult result = new StreamResult(System.out);
tf.transform(sc, result);
System.out.println();
// Close connection
connection.close();
System.out.println("\nResponse =\n" + response);
catch (Exception e)
e.printStackTrace();
Pl. reply as soon as possible
Thanks in advance -
Here's how to pass XML as a parameter to an Oracle stored proc
This, or something like it, should be all over the web and I intend to do so.
The first sample has exactly what you need in order to pass "XML" as a parm to a stored proc.
http://www.oracle-base.com/forums/viewtopic.php?f=2&t=8468> Really, what is the difference between the 2?
"What is a...?" questions are easily answered by Google. Generally speaking, however, "JavaScript" is Netscape's implementation of ECMAScript, a scripting language primarily for client-side development for a web browser. "Java" is an entire platform, but typically refers to an object-oriented programming language that is typically compiled to bytecode and run in a virtual machine.
They're not the same thing at all.
~ -
How to pass values to Oracle store procedure in Crystal Report
Hi all,
I am newbie on passing values to stored procedure parameters. I created a Crystal Report using the Crystal Report wiward with PULL method and data come from Oracle stored procedure. In an ASP.NET page, I have stored two values in Session and need to pass them as input parameters to Oracle stored procedure to print the report. In Crystal reports 2010 once you connect to a stored-procedure as data source, it automatically creates the parameter fields with Crytal Report Viewer. Please show me how I pass values to store procedure at runtime automatically.
'Set the parametter value
myReport.SetParameterValue("@P_COURSE", "CoursetNo")
myReport.SetParameterValue("@P_CLASS", "ClassNo")
End Sub
I tried to apply above codes from Brian Bischof book but display the error from the following lines:
myReport.SetParameterValue("@P_COURSE", "CoursetNo")
myReport.SetParameterValue("@P_CLASS", "ClassNo")
I also enclosed my code. Any experts, please let me know anything wrongs on my code . I tried several methods that searching via google, but did not solve my issues. Thanks.
Edited by: avt2K7 on Mar 15, 2011 7:02 AMHi,
Thank you for your response. Here are the detailed code and error as following:
Please show what I am missing in my below VB.NET codes:
===========================================================================================
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
LogonToTables("username", "password", "servername", "")
End Sub
Private Sub LogonToTables(ByVal myUserId As String, ByVal myPassword As String, ByVal myServerName As String, ByVal myDataBaseName As String)
Dim Course, Class As String
Course = Session.Item("CourseNumber"))
Class = Session.Item("ClassNumber"))
Dim myReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
myReport.Load(Server.MapPath("CrystalReport1.rpt"))
Dim myTableLogonInfo As CrystalDecisions.Shared.TableLogOnInfo
'Set the database properties and security credentials
Dim myConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
myConnectionInfo.ServerName = "servername"
myConnectionInfo.DatabaseName = ""
myConnectionInfo.UserID = "username"
myConnectionInfo.Password = "password"
'Apply the ConnectionInfo to the report tables
Dim myTables = myReport.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
myTableLogonInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
'Set the parametter value to Crystal Report parameter named P_COURSE and P_CLASS
myReport.SetParameterValue("@P_COURSE", "Course")
myReport.SetParameterValue("@P_CLASS", "Class")
End Sub
=================================================================================
I put a break point to debug but display the error at the following lines:
myReport.SetParameterValue("@P_COURSE", "Course")
myReport.SetParameterValue("@P_CLASS", "Class")
Eventhough, if I set a specific value to Course=1000 and Class = math and still receive the error:
Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
I tried several sources from Google search but it is not working. I really appreciate any detailed code either in C# or VB.NET to solve my issues. Thanks in advance. -
Problem in calling Client proxy using ABAP Report
All Your inputs and various threads were really helpful . i have followed this blog as well /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Now after all while trying to pass values to proxy i have an issue : in the above blog there is a small pinch of code for referencing the proxy through an abap report.
i.e. &----
*& Report ZBLOG_ABAP_PROXY
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sravya'.
it-emp_profile_msg-empno = '80101'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
now instead of the DT being in this way : i.e. :
EMPProfile_MSG OCCURENCE
EmpNo 1
EmpName 1
DeptName 1
Instead if the DT / MT for which the proxy is generated is in this format for table data input then whats the way ?
EMPProfile_MSG OCCURENCE
.....Item 0..Unbounded
...........A 1
...........B 1
...........C 1
...........D 1
Please advice,
KrishnaHi,
Did you create a Data type,message type and Message interface and generated the proxy in trnx SPROXY?
If so, then a class gets created like ZCO...........
under which, structure gets created as you did in IR of XI.
Need to implement a BADI and Ztable on the Abap stack.So you get the values dynamically to your proxy.
For each change in your emp details,there will be a record in Ztable.
Hope you understand this.
Regards,
Joslyn -
OSB-how to pass xml to another proxy Service
Hi
i am getting a xml as string after java call out and then i am using "fn-bea:inlinedXML($iso2xml_31)" for converting the string to XML,but when i am passing the inlinexml variable to another Proxy service by servicecallout i am not getting it.
grateful if anyone can throw some light in this matter.
thankspassing the inlinexml variable to another Proxy serviceMake sure the assign in the service callout is passing the right content to the other proxy service... Use OSB Test console to check the content of the variables...
Cheers,
Vlad -
How to Pass XML Data to a PDF Form and Load it into form fields
I have xml Form data in a string. I would like open a programatically launch a pdf document and pass the xml data as one of the parameters and this xml data needs to load all the form fields.
Any Idea as to how this can be done?I have the same requirement as Daminu, but from the research I have been doing it seems your reply is only partially true.
If your PDF is an XFA PDF form, with Reader Extensions enabled, and you want to keep the Reader Extensions functionality for a user to use after your programmatic manipulation, then neither of these tools will work (FDFToolkit or iText).
Upon the user opening the file once it has been programmatically modified, the user will see the following:
From what I have read, this requirement can only be fullfilled by use of LiveCycle Reader Extensions Server? Please confirm? -
How to pass username/password through WebService proxy client to E-BS.
Hi
We are using ADF Webservice proxy client to integrate E-Business suite with ADF. It asks for username/password to access details from E-BS. In the generated webservice XSD file, a method is available with 2 parameters.
1) SOAP header( Contains Username, responsibility and 2 more fields)
2) Class object(Nested Object)
However i didn't find "*Password*" field anywhere in it. Then how can I pass "*Password*" along with username to invoke this method?
When i checked SOAP, the password is defined like this
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">XXXX</wsse:Password>a
Thanks
Rajahi Dario
Thank you for your post. It is really helpful. Now I got stuck with a doubt, in this piece of code
final Binding binding = ((BindingProvider) servicePort).getBinding();
List<Handler> handlerList = binding.getHandlerChain();
if (handlerList == null)
handlerList = new ArrayList<Handler>();
They didn't mention properly about "*servicePort*". What object is this?
I checked in Oracle document, even in that I was not clear with that piece of code.
public class HandlerWS{
@Resource WebServiceContext ctx;
@WebMethod()
public String getProperty(String propertyName) {
return (String) ctx.getMessageContext().get(propertyName);
public class Main {
public static void main(String[] args) {
HandlerWS test;
try {
test = new HandlerWS(new URL(args[0] + "?WSDL"), new
QName("http://example.org", "HandlerWS") );
} catch (MalformedURLException murl) { throw new RuntimeException(murl); }
HandlerWSPortType port = test.*getHandlerWSPortTypePort*();
What is this HandlerWSPortType object???. Can you give me little more explanation about it?
Thanks -
How to pass xml in Web Services
Hi,
Can some one suggest which is the best way to send xml in web services.
It can be sent as string (CDATA) or attachements.
Is there any other way, may be as some object??
I would appreciate if someone can help me on this.
Thanks & Regards,
Rana BiswasHi, Eric,
Thank you for your quick reply.
The web service I am trying to develop is basically a generic Data Access Component to bridge between SQL server and a desktop .Net application. The application will have about 3000 users from WAN, therefore we want to have a server side component to handle connection pooling etc. Because of limitation of current servers, we are asked to develop a Java Web Service, instead of MS WS.
To make the component more reusable, I am thinking to have methods like this in the service:
RunQueryReturnRS(String Sql, WebRowSet, rs)
RunQueryReturnInt(String Sql, int NumRecdImpacted)
RunStoredProcedureReturnRS(â¦.)
RunStoredProcedureReturnInt(â¦.)
â¦â¦
You see, I would like to get whole resultset back to client, including both metadata and data in a format of generic resultset. When I paged through the Sunâs document, finding WebRowSet is claimed to be seariable, and ready for Web Service. I thought if I can use WebRowSet that will save me time to write new classes to hold resultset info and pass back to client.
Could you please tell me if it is a feasible approach?
Thank you.
-Qing
Maybe you are looking for
-
How to set up slider mobile menu widget on master and pages of mobile website in Muse
Adobe Muse Slider Mobile Menu Widget by MuseThemes I am new to mobile website design and Muse, I love this widget, but I am not sure how to set it up on multiple pages. Do I put it on the master? Content covers it when it is on master, so I could use
-
How can I transfer my itunes from an old mac to a new one?
I recently purchased a new mac. I need to transfer my itunes from an old mac to another mac. How can I do that?
-
How to run virtualbox init.d script, if using systemd
I just installed virtualbox and the host modules with pacman. I then created my virtual machine and switched to bridged network setting and get the following error. I don't get this error when I use NAT. Failed to open a session for the virtual mach
-
I have problem with my beats studio new. I bought beats in New-York and on the next day I felt very big problem. On the charge I see 5 white flash-lights and without charge - one red flash light. So there is not sound. I am from Ukraine and we have
-
Trasnaction Location is shown in Expense Location in iExpenses
Hi All, We are populating the MERCHANT_CITY field of the ap_credit_card_trxns_all table with the relevant transaction location unsing our custom programs. However when an expense report is created it we are facing the below issue. That is of there ar