How to paste arabic and russian text in indesign and have the fonts recognized?

How to paste arabic and russian text in indesign and have the fonts recognized?

There is a preference item for clipbaord handling that toggles text ony or formatted text when pating from external applications. You may be pasting unformatted text.
And of course the fonts must be installed...

Similar Messages

  • How to I import Apple 'Pages' text into InDesign while keeping the formatting?

    How to I import Apple 'Pages' text into InDesign while keeping the formatting?

    I have imported the rtf file, but it shows up as only one line with a grey line after it, even though there are multiple lines

  • Want to edit text, but do not have the font

    Hello:
    I have a certificate in a pdf file, and I have Adobe Acrobat XI. The file contains the fonts Shalom Old Style (only a couple of Hebrew words) and the font Sanvito.
    Since I have neither font in Windows 7, I assume (also after having tried) that I cannot edit/change text in the pdf file. I converted to Word 2010 and made the changes, but, of course, it selected other fonts, and I could not convert back to pdf with the correct fonts.
    Seems one can download fonts for free on the Web, but I am leery for two reasons: they usually are not free (and I am willing to pay) and the risk for malware is, I believe, high.
    I would greatly appreciate your comments and assistance, esp. some source for not too expensive fonts (If I need them).
    Regards,
    Hans L

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • How can I digitalize a document text in PDF and export it to WORD?

    Anthony
    How can I digitalize a document text in PDF and export it to WORD?

    If you already have a PDF document, ExportPDF can help you with this task. https://www.acrobat.com/exportpdf/en/convert-pdf-to-word.html
    On the other hand, if you have a physical document, you'll need to scan it into a PDF document first.
    Depending on what you need to do you may require different tools & services, so please help us out with more details.
    Vlad

  • I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't

    I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't continue in Hebrew.  I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste.  Does anyone know how to fix this?  I use an older MacBook running OS 10.9.1.  I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.

    Just clarifying:
    Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
    Pages 5 has much better support but with bugs.
    If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
    If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
    As Tom recommends the only real solution on the Mac is Mellel.
    Peter
    btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
    Peter

  • I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    The application Acrobat provides no language translation capability.
    If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
    Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
    Transfer the output into a word processing program that is localized to the appropriate language.
    Do cleanup.
    Be well...

  • How do I get Elements to occupy full screen on my macbook pro? - the docking station remains visible and I don't want to have the dock in hide mode?

    How do I get Elements to occupy full screen on my macbook pro? - the docking station remains visible and I don't want to have the dock in hide mode?

    Unfortunately, there is no answer to this problem via this link. It may be that this is simply how the software actually works. It is a design fault in Adobe Photoshop Elements. It is possible to temporarily hide the dock within 'system preferences'. Oh well. Someone may know better.... I hope!

  • I bought photoshop from pc world, it was a download via activation code my computer has broken and had to be replaced how do i re download program as i no longer have the scratch card

    i bought photoshop from pc world, it was a download via activation code my computer has broken and had to be replaced how do i re download program as i no longer have the scratch card

    you just need your serial number.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT4623 in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyo

    in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help

    stell80 wrote:
    in settings and then general i do not have the option of software update...?
    That is only present if you have already updated to iOS 5 or later.  If you're on iOS 4 you can only update while connected to your computer's iTunes.
    stell80 wrote:
    How do I know if I am on IOS6
    Settings/ General/ About
    stell80 wrote:
    I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
    You can't access iCloud from your iPhone unless you're on iOS 5 or later.  Otherwise, refer to this article:
    http://support.apple.com/kb/HT4436

  • I text a friend, from my contacts and they text me back and only the number shows up on screen, not the name who it is from?

    I text a friend , from my contacts and they text me back and only there number shows up on the text???  So all day, i'm asking my friends in my contact list, who is this? If the lakes and rivers were not frozen here, my phone would be on the bottom of them!!!

    Are you with Verizon?  If you are take a look at the link and see if it helps
    http://discussions.apple.com/thread/3752984?tstart=30

  • I was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?

    i was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?

    You may not be able to get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
    http://www.apple.com/support/itunes/contact.html
    It's possible they'll make an exception for you, particularly if the problem was on their end preventing the movie from downloading in a reasonable time.
    Good luck.

  • How do I redownload elements to my new computer, I have the key and S/N?

    How do I redownload elements to my new computer, I have the key and S/N?

    Apparently Adobe does not offer support for Elements12 and Premier.  Frustrating I spent most of yesterday trying to down load the two files you and Chat directed me to and nothing happened, the files wouldn't properly download.
    Your thoughts,

  • I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

    I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

    Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
    Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
    Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
    So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

  • I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

    I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
    == When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

    Brilliant! Problem solved! Thanks so much.

  • TS2755 How do I turn of imessage when i no longer have the iphone!?

    How do I turn of imessage when i no longer have the iphone it was activated on? so frustrating dont get any messages from iphone friends also it seems like there is no solution to this problem and to make it worse apple cant help without a serial number!!

    please
       Allan Sampson  
       wjosten  
    can you do something about my message, to much personnal info. Possible to make it diseappear ?

Maybe you are looking for

  • I can't open iTunes 7.2 on my Windows XP PC....

    I can't open iTunes 7.2 on my Windows XP PC and I received the annoying error message "iTunes encounter a problem and needs to be closed, we are sorry for the inconvenience". I install/upgrade iTunes from 7.1.1 to 7.2 and no error messages during ins

  • My dream new communicator

    As a person who has kept faith in the communicator range since the 9210, I am waiting for the new release with both hands. Please Nokia, kindly add the following features. 1. If you can fit 4GB in a N91, can you kindly fit anything over just 1GB to n

  • No VoiceOver in Word Doc

    I have been able to use VoiceOver with TextEdit but not with Word documents. I can navigate the menu bar and scroll bars in a Word document, but I cannot get the echo voice for creating text or the usual voiceover for reading text. None of the comman

  • Error msg: Artwork DB is corrupt

    can't find this file to delete or fix, can you help? "\iPod_Control\Artwork\ArtworkDB is corrupt" dell latitude D400   Windows XP Pro  

  • Clustering SQL Standard edition on three nodes as Active/Active/Passive

    Is the limit of Standard Edition clustering of SQL a licensing limit or a technical limit? We have an Active/Active cluster (2 nodes, multiple SQL "resource group" installations), and we want to add a third node in to become the passive node for all