How to pause a imported .swf logo?

I've exported a 3 seconds turning Logo (.swf file, done by
After Effect)
Pls tell me how to pause the logo after it had fly out (in a
10 seconds slide)?
I've tried to pause the logo in After effect till 10 seconds
but the .swf export file size is HUGE!
I've tried to drag and extend the 3 seconds logo in timeline
to 10 seconds,
but i found out that the logo will became SLOW MOTION and
just turn into 10 seconds animation (won't pause after 3 seconds
turning effect),
So can i let the 3 seconds logo flying out, and pause it at
last frame till 10 seconds in Captivate?
Thanks~!
Lulu
Malaysia

Thanks Dexterous!
I've discovered a method to pause swf effect at last frame!
1. Output 3d logo using After Effect:
---- (12 frames per second + Resterized + Jpeg quality low +
no looping).
-----Uncheck the loop continuously box.
2. Import to Captivate using Insert/Animation
3. Under Options: Display for: rest of slide,select
Synchronize with project (Uncheck the loop) and Fade in only.
Now even the slide is 10 seconds,
my 4 seconds spinning .swf animation logo will show in the
slide
and pause at the last frame untill the slide finish!!!
So i can output swf animation with a very small file size!!
(^ v ^)Y
Lulu
Malaysia

Similar Messages

How to import a logo from flat file to SAP in SMARTFORM.

how to import a logo from flat file to SAP in SMARTFORM. i need to know whether TIFF format is used and also the full steps.
Thanks,

Hi,
You can not directly use a logo from a file into a Smart form. First you will have to upload it to SAP. This has to be done only once. Once it is imported into SAP then you can use it in smart form. To import a logo to SAP, goto SE78. Open the tree under GRAPHICS. Select the file type and click on the Import (first button on the toolbar, just before delete button). Select the logo file and give it some appropriate name along with description. Select appropriate type of the image and click Continue. Your logo will be uploaded into SAP from a file. Now in your smartform, Create a Graphic Node, give the name of the logo along with other properties. In this way you can import a logo from a flat file into SAP and consequently in a smart form.
Reward points if the answer is helpful.
Regards,
Mukul

How to insert AS to fix audio in imported swf ?

Thanks to Whyves... This previous post seems to have a solution, Im just not sure where i create layers in my Captivate 4 file? As I go into Project > Actions >???
Cheers
5. Mar 31, 2010 4:23 PM in response to: Whyves_
Re: Captivate 4, interaction SWF using XML and the Reviewer tool Problem
Part 1:
Found a way to stop the imported SWF audio when a user switches slides. The following AS3 code was inserted into the imported swf:
My actions layer:
root.addEventListener(Event.ENTER_FRAME, checkSlideInfo);
My functions layer:
function checkSlideInfo(e:Event):void {
    /* if user moves to next or previous slide in Captivate, stops the interaction audio */
    if(root.cpInfoCurrentSlide == 4) {
        null
    } else {
        /* stops audio */
        if (savedChannel!=null) {
            savedChannel.stop();
        /* resets interaction */
        loadContentToBox(contentBox.contentText, instructions);
So, for those trying to find a way to stop their audio from imported swfs, there's one piece to the puzzle!!! You CAN stop your imported swf audios or animation audios using the above function in AS3!
BTW, it would be nice if Adobe would create a book on Essentials to Advanced Actions, just a suggestion since it is somewhat of a programming language and it would be nice to have samples and more informative tutorials to use.
NOTE: The above function calls on other variables and functions are specific to the interaction. The main piece to focus on is the roo.cpInfoCurrentSlide. It had to equal slide 4 in order to allow the interaction swf audio to play. If the user switched, I stopped the savedChannel (named soundChannel variable in AS3) from playing.

Hello,
About your suggestion for a book on essentials for advanced actions. Rick Stone has such a book, for Captivate 4 (Goober Guide). I have been blogging a lot about advanced actions, with links to tutorials published with Adobe Publishing Application. It is not a book, but could perhaps help you if you did not yet visited the blog. The feedback from readers is pretty positive. Here is a link to a post that has a list with the published articles, a lot of other blog posts explain use cases and principles:
Articles on Advanced Actions
Lilybiri

How to import swf files into project

I am new to flash programming. I have to make minor
modifications to an swf
file. I decompiled it to the fla file but all of the sprites
which are
themselves swf files did not end up in the fla file. how do I
get these swf
files back into the project so when I make the new swf file
it will be the
same as the original one?

Hi
I think 'Handbrake' will convert swf files used it for lots of converting but not tried it with swf recently, its available for free download just give it a google.
Hope this helps

How to playback an embedded swf in a Captivate project

Hello,
I generated a swf file from one captivate project and am embedding it into another. When I play back the slide that has the imported animation the playback from the slide and the imported swf are different. If I pause the main slide playback the swf continues and vice versa. How do I get the playback of the imported swf file to be controlled by the main playback controls? I am using Cpativate 4.
Thank you in advance

Hi there
I'm hoping one of the Captivate team members picks up on this one and either confirms or denys my findings.
It is my understanding that one cannot control the other. Likely you may want to simply insert a Click Box or Button on the slide with the SWF and allow the user to move on when they are ready after having interacted with the SWF.
You may wish to experiment with the properties of the embedded SWF. There is an option called "Synchronize with project". But I'm doubtful it will work to accomplish what you want. I think what this option does is to ensure that if the timing of the slide is different than the SWF inside, it will play the SWF in its entirety.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

How to Put Controls on SWF File... then Export to FLV

Have a swf file that self plays.
What I Need:
I need to imbed this self playing 2 minute video clip with
sound...but I want it to have controls on it and be paused. I want
to use dreamweaver to place it in the web page but stupid
dreamweaver only puts controls on a flv file NOT SWF's.
How can I get a swf file, then add controls, then output to
FLV so Dreamwemaver can put it on my page.
I have Adobe Dreamweaver CS4, Flash CS$ but DO NOT KNOW HOW
TO USE IT - Tried but failed miserably (it didnt even want to put
controls easily on this...I tried for 30 min but couldnt break
through. I have the CS3 Master Collection.
Thanks
All I want is for this video to play universally and nicely
in a web page of mine...when will this stuff ever be compatable and
transparent to use!
Suzzie

For me, not. But yes I have to do this. Maybe I manual have a table which includes the y axis coordinates. X axis is dicrete then when I get the value 2 I will look at its y axis and take the coordinates of the y-axis corresponds to the table
Is it difficult?
Yasemin Barutçu
Electrical And Electronics Engineer

Import swf files in CP3, but export without any voice?

Did anyone have the same problem with me?
I imported swf file in slide and published. But I can't hear any voice in the slide....
At the same time, I tried to import as flv file and published, then it works. Voice in slide can be heard with no problem.
How can I fix the problem? thanks!!

Hi,
Just a quick check. Go to menu item " Edit > Preferences" and select category "Publish Settings".
Confirm that option "Include Audio" is checked.
regards,
Mukul

How to get rid of IDES logo in the SAPScript Layout PSFC_PRINT_LAY ?

Hello Guys,
I am trying to print the standard production order.
The printout has the IDES logo on top left corner for the SAPScript Layoutset PSFC_PRINT_LAY.
How do I get rid of it?
Is there a config setting for that?
How do I insert my own logo?
Thanks
George King

hi
I tcode se78 where you have to import your logo from outside to SAP system. and then copy this to the smartform of PSFC_PRINT_LAY
but for this you have to consult with ABAPER
Regards
Pravin

Imported swfs display different every time

Hello -
I have tried importing swfs, and each time it displays different when published. The first time, it resized and could be seen completely within the window. The second time, it did not resize so only the top left of the image could be seen. The third, time it sort of resized, but is still cut off on the bottom. I inserted the same swf file the same way each time, so I'm not sure what affects the way it displays when published. I'm using the trial version of Presenter version 7.0.7 Build 7746. The swfs were created in Captivate 5.0, and I'm using Office/PowerPoint 2010. Below are examples of what each looks like after the publish. Does anyone know how I can control how the swf will display once published?
Thanks!
Katherine

Hello -
I think it has to do with resizing the swf once it is imported. I resized it first by widening it so it went the entire width of the page - the second time I believe I did the same thing and got the larger image. Then I tried various ways of resizing and also not moving or resizing at all, and got these different results. It is not consistent, the same way of resizing did not result in the same output. Is it not possible to resize the imported swf - for example, resize so it takes up the entire slide? Below is a link to download the swf I'm using.
http://mylearn.documentum.com/curriculumdevelopment/slide4.zip
Thanks!
Katherine

Importing Swf

Hi there,
I have created a flash file using codebaby and it is transparent; however, when I bring it into adobe presenter, it has a black background. How do I get rid of the black background of the imported swf file? It looks great in other tools; however, I need it to be transparent in adobe presenter. I have 7.0.
Adobe presenter 7.0.6 build 7604

Hi there,
I am using AS2; however I still get the black background, so then I tried capturing the background and using that in my background and I get a border.

Call a function in the shell SWF from a imported SWF

We have flash set up as a shell to take lesson data from XML
and display it frame by frame.
We import SWF files when the XML tells it to to be displayed
on the frame.
How can I get the imported SWF file to call a function in the
shell....
basically have a button or movie clip in the imported swf
call the "gotoNextFrame()" function in the shell.

We found a "bit" easier way if anyone is interested.. we have
the have an eventlistner added to the loader to assign a event to
the swf file thats imported:
flashLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,
addEventHandlers);
then when its completed, it adds event listeners and calls
our "goNextFrame" function (then clears it when its removed from
the stage):
function addEventHandlers(event:Event):void
var swfMC:MovieClip = event.target.content as MovieClip;
swfMC.addEventListener("NextFrame", goNextFrame);
swfMC.addEventListener("PreviousFrame", goPrevFrame);
swfMC.addEventListener(Event.REMOVED_FROM_STAGE,
clearEventListeners);
Then in the swf file thats to be imported, its real simple:
next_btn.addEventListener(MouseEvent.CLICK, MoveToNextFrame);
prev_btn.addEventListener(MouseEvent.CLICK,
MoveToPreviousFrame);
function MoveToNextFrame(e:MouseEvent):void
dispatchEvent(new Event("NextFrame"));
function MoveToPreviousFrame(e:MouseEvent):void
dispatchEvent(new Event("PreviousFrame"));

HELP my imported SWF

I have created an animation of a superman like character flying with the animation being his cape flapping, his eye moving occasionally, and he moves up and down slightly to imitate the movement of flight.
I exported that animation as a SWF movie.
I then opened a new document and then imported that SWF file into the library to use, but when I place it on the stage, the functionality doesn't work. The only animation that has carried over from the original file is the cape flapping. The moving eye doesn't work, and he doesn't move up and down anymore.
I'm quite new to animation in flash, so maybe I'm exporting and importing too many times or something, or I'm just not going about it the right way.
Should multiple animations be done in the same document? or should they be done individually and then all imported into a new document where they all come together?
All help and advice most welcome.
Thank you.

First of all I done all the artwork in Illustrator, then I imported the pieces into Flash and set them in position, putting on seperate layers the parts that were to to move, eg. the pupil in the eye moving within the eyeball.
For the cape, I had done what you said not to do, but it's the only thing that's working, ironically. I made the flapping cape animation in a separate flash document using 5 different images and changing to each along the timeline every 1 second. I then exported the flapping cape as a SWF movie and then imported it into the flash file where the body of the character was and positioned it where it should be.
The eyeball moving occasionally was done using a motion tween, as was the gentle moving up and down of the man flying.
Then I exported ALL that as another SWF movie so that it was one animation (which actually included 3 different animations. 2 done in the document, and one imported SWF), but it's only the flapping cape that continues to work even if I copy all the layers across instead of importing the SWF.
I know that all sounds a bit of a mess to people who know how it should be done, but I'm a bit lost at the moment as I'm not sure which steps I should be taking and in which order.
Thanks for your help with this.

Imported SWFs background to "Transparent" in Presenter?

Is it possible to set an imported SWFs background to transparent within Presenter? I have Presenter 7, PowerPoint 2007, Flash CS4, working in Windows Vista.
The only way I know to set SWF transparency is with the WMode parameter... so, in PowerPoint, if I right-click the imported SWF and choose "Properties" I get the Properties window which contains a field WMode. I set this to "Transparent", but when publishing the Presenter file to "My Computer" the original SWF background (white in this case) still shows up.
My PowerPoint has a gradient background, and my SWF file's stage is smaller than my PPT stage. Making teh SWF BG transparent will allow me to place the SWF wherever I need to on the PPT stage without having to worry about lining up background gradients precisely.
Any help is appreciated.

So, not even 4 years later, and after 2 new versions of Flash can we still not produce a transparent background to be able to seamlessly go in a Powerpoint 2010 file? I imported a single/looping file under the <Insert Tab. It had a transparent backgound and a playhead with start/stop on it. Can't remember how I did it though?
Thanks,

(MX04) Pausing a loaded swf with sound objects within it

Hi,
I'm working on a PowerPoint-esque presentation where a user
watches and listens to a loaded swf in the main movie, clicks the
next button (which unloads the swf, advances to the next frame and
loads the next swf), and watches the next one. Lather, rinse,
repeat. Some of the sections are rather long, and I'd like to give
the user the ability to pause and play by button click.
I know how to stop and start the container MC, but that
doesn't stop the sound object (and the embedded MCs). I also know
how to pause and start a sound object using the object's instance
name. Is there a way to pause everything from the main timeline,
and keep the AS general enough so that any sound object pauses when
clicked?
Any help is most appreciated! MX04 and AS2.0.
Thanks!

Kglad,
I tried your code and ran into some problems with stopping
the mc's, as the embedded mc's within the loaded swf need to stop
as well. I found the attached code to stop the mc's, but now am
having trouble with the sound objects.
Here's the issue, I used this:
this.soundPosition = currentMovie.loop1.position/1000;
this.currentMovie.loop1.stop();
... for the sound object stop commands and listed a new one
for each loop I was using. On the play button I started them back
up again. This all works, but when I start them up again they all
play, not just the one that is currently paused. Do you mind giving
me some guidance with the for (obj in mc) loop? My loop experience
is nil. What I want to do is have the code cycle through all of the
loops to see which one is playing, then store that information in a
variable, then pause and play the variable. Does that sound right?
Thanks again for the help!
-Sandy

How to pause a imported .swf logo?

Similar Messages

Maybe you are looking for