How to pause a video on a slide

Hi everybody,
so i have inserted a video into a captivate slide.
Its a mp4 that goes about 6 sec. Video starts well, but after its finished the video disappears.
I want Captivate to automatically stop it after 5 sec and freeze (there is a person walking into the picture and i want the picture to stand still instead of the person disappearing).
Anyone an idea how i could do this?
Thanks in advance for any tips...

There is also SnapZProX if your willing to part with some coin for more options.

Similar Messages

How to pause while video recording on iphone6 ?

How to pause when video recording on iPhone 6?

Hello sbonasoro,
Welcome to the Apple Support Communities!
I understand that you would like to pause video while recording on your iPhone. You cannot pause a video recording and pick it back up where you left off, but you can stop the video and start a new one when you would like to continue filming. Please refer to the attached iPhone iOS 8 User Guide for further information (page 94).
Shoot some video. Choose Video, then tap the Record Video button or press either volume button to start and stop recording. Video records at 30 fps (frames per second). With iPhone 6 or iPhone 6 Plus, you can switch it to 60 fps in Settings > Photos & Camera.
Snap a still while recording: (iPhone 5 or later) Tap the white Take Picture button in the lower-left corner.
Have a great day,
Joe

How to embed a You Tube video into Keynote slide?

Hi there,
I am wanting to go further than simply making a hyperlink.
How can I embed a you tube video in the slide?
I am going to save as powerpoint for presentation on PC so hoping it will still work as well.
P.S This question has been asked previously but got no replies!!
If anyone has an idea....your knowledge is much appreciated

Any reason you don't download the video and just place it in your presentation?

How to use video in a slide show

I've created slideshows in iPhoto and incorperated a mizture of photos and videos.
I've now made one using Aperture but the video does not play - it just shows the first frame. The video will play if I select it alone in the browser.
Any suggestions.?
Thanks.

Thanks Frank, I had watched that some time ago but it was good to be reminded of it.
What I was having problems with was running the slideshow in 'manual' mode ie starting it using the Play slideshow option and then moving on from slide to slide during my talk which has no set time for each slide.
What I discover is that using the keyboard or mouse, in effect, puts the show on pause. Using arrows or mouse moved the show forward but to show video it is necessary to press space to cause it to run and then pause it again - or set slides to a very long display time.
Anyhow, unless there's a neater solution this is workable.

Toggle pause & play a video in a slide

Does captivate has function to toggle pause & play a video in a slide using keyboard shortcut?

If using Slide Video, the Spacebar or F3 key may work.

How to burn a slide show DVD in Elements 11? Can only find how to burn a Video CD, which doesn't help.

I'm trying to burn a DVD slide show in Elements 11, but can find only how to burn a Video CD. Is burning a DVD possible in 11?

Do you know if it is Vista Home Premium?
If yes or if you are not sure, look for Windows DVD Maker,
On my Vista Home Premium laptop whe I click on "All Pprograms", within the list of programs I see "Windows DVD Maker" listed as a program.
If you have this program then my suggestion is to use the PSE slide show editor to Output a file to your hard disk
(use the
-- the "Save to a File" instead of the "Burn to a Disc"
and
-- the "Movie File - .wmv"
and for slide size choose:
DVD-NTSC if in USA
or DVD-PAL if in Europe or other PAL TV country
Save the wmv file in a hard drive folder where it will be convenient for you to reference for later use in the Windows DVD Maker program.
Once this wmv file has been successfully created, you can play it back with Windows Media Player to verify that you like its contents.
Your next step will be to use the Windows DVD Maker program to write the formats of movie files required for the TV DVD player playback to the DVD disc. I recommend closing Photoshop Elements and then open Windows DVD Maker from the Windows Start menu list.
Windows DVD Maker is a "follow the instructions on the screen" program.
However, one point of confusion is how to add the PSE created slide show to DVD Maker program.
The answer is that you use that .wmv file (from the PSE slide show editor) -- it is now in a video format and is a "video". So you can follow the onscreen directions to add video to DVD Maker.
Note 1: I recommended closing PSE before starting the Windows DVD Maker in order to conserve your PC system resources. It is probably not absolutely necessary.
Note 2: You could also produce the DVD for TV playback by adding Adobe Premiere Elements to your computer. However just for the purpose of making the DVD from your slideshow I anticipate that using Windows DVD Maker will be simpler and faster.
Note 3: I recommend using a DVD-R disc. What brand of discs do you have?

How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.

How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.

Try sharing and see if the effect is still present when you play the shared movie. It can happen when playing within iMovie if there are insufficient resources to play a full resolution.
Geoff.

My iPod automatically pauses the videos whenever I press play. How can I fix it?

My iPod automatically pauses the videos whenever I press play. How can I fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Regarding points see:
Apple Support Communities - Reputation, status levels and privileges

How can I Stop Video from Playing? (not just mute or pause)

I have a page for playing a video. Below it I have a 'return to previous page' button. If the video is playing and I click this button to return I can still hear the video playing in the background. I know how to mute or pause the video when clicking this button but I would like to know how to completely stop the video so that if I go back to the video page - the playhead is at the start and I can see its thumbnail image again.
Anyone help?

do you mean:
sym.$("Video01")[0].currentTime = 0;
I tried this but it didn't work (just resets and plays in background). Also, I have several videos on one page and a navigation bar at the top. I would like (when I click the Nav Bar to go to another page) any video to stop and reset to its Poster.
If you like, I could send over a very simplified project.

How Do I Pause A Video Recording?

How can I pause a video recording using the inbuilt camera on my iPod Touch 8GB? There don't seem to be a option to do this. Is there a way of combining videos to be as one instead?
Thanks

You can also check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

How do I delete more than 1 slide at a time from the custom slide show in Elements 8

How do I Delete more than 1 slide at a time from the custom slide show in Elements 8?

How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
 Cheers, Tom

How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

Keynote is not designed to produce printed media, it is set up is for video. There are dozens of applications that are designed for printed output on the Mac, Pages, Word, In design, Quark, Open Office, Libra.
Pages is the accompanying application in the iWork suite that is specifically designed to print to paper, you should look at that first as it May be on your Mac already.

How to pause a imported .swf logo?

I've exported a 3 seconds turning Logo (.swf file, done by
After Effect)
Pls tell me how to pause the logo after it had fly out (in a
10 seconds slide)?
I've tried to pause the logo in After effect till 10 seconds
but the .swf export file size is HUGE!
I've tried to drag and extend the 3 seconds logo in timeline
to 10 seconds,
but i found out that the logo will became SLOW MOTION and
just turn into 10 seconds animation (won't pause after 3 seconds
turning effect),
So can i let the 3 seconds logo flying out, and pause it at
last frame till 10 seconds in Captivate?
Thanks~!
Lulu
Malaysia

Thanks Dexterous!
I've discovered a method to pause swf effect at last frame!
1. Output 3d logo using After Effect:
---- (12 frames per second + Resterized + Jpeg quality low +
no looping).
-----Uncheck the loop continuously box.
2. Import to Captivate using Insert/Animation
3. Under Options: Display for: rest of slide,select
Synchronize with project (Uncheck the loop) and Fade in only.
Now even the slide is 10 seconds,
my 4 seconds spinning .swf animation logo will show in the
slide
and pause at the last frame untill the slide finish!!!
So i can output swf animation with a very small file size!!
(^ v ^)Y
Lulu
Malaysia

Is it possible to pause a video clip?

Hi,
Could anybody tell me if it possible to pause a video clip for a few frames and then resume playing later in the project?
I guess I could chop the video clip into several discrete shorter clips and create some static freezeframes, and then play them all one after the other to crate the same effect.
But that sounds clumsy so I wondered if there is a way to pause/resume a video clip within a project.
Thanks.
Meme.

Many thanks for the pointers. I excitedly booted-up Motion to explore further...
... but I couldn't find anything called Timing remap or re-timing etc. Then it dawned on me that I should have specified that I'm still using Motion 2, and I guess those features are only available in Motion 3?
However, armed with the new phrase 'Timing Remap', I dived back into Google and came up with this article:
http://www.kenstone.net/fcphomepage/speed_changesmotion.html
This explains how to use the Scrub filter (also available in Motion 2) to control the playback of video clips relative to the project.
Its a bit fiddly, but I'm comfortable with basic arithmetic, so I can certainly use it to achieve the effect I want (basicaly I need a video clip to pause and then resume a few times throughout a project).
So thanks again for the feedback. It really did help.

How to Stop a Video in ActionScript 3

I have created a flash site that navigates between 4 pages (Home, About, Play, Making)
The pages Play and Making both contain videos that are a movie clip symbol and have skins on them.
When i press play (I turned off autorun) on a video it will play as should do, but when i navigate to another page such as Home or About, the new page will appear but the sound from the video continues to run in the background.
It's as if it keeps that page in the background and keeps playing. When i attempt to go back to the page and try to press pause - the video is at the beginning, waiting for me to press play, its not going at all, even though i can still hear the music of it going.
I want to know how i can make it stop the video when i navigate to another page.
I have tried to put "instance_name.stop()" but it stops all animations in the whole site. (every other animation is a graphic not a movie clip)
I run Flash CS5 and its in an actionscript 3 page.
How can i make it stop????
If you need more info to help me with this problem, let me know and i will tell you what you need...

The very first action in any of the page navigation should be a control on the video to stop the video. Then.... and only after the video has been stopped, navigate to the next page.
Most likely your video player has a "Stop" button. Call that action first in your page navigation button.
If you are using NetStream, then you'll want that action to be
netstream.close();
so that the download of that first video file also stops. Other wise the entire first video file may be downloaded even if the viewers does not watch the whole thing. Be sure to do some testing to make just you can also stop the downloading, not just turn off the video/audio.
Best wishes,
Adninjastrator

How to pause a video on a slide

Similar Messages

Maybe you are looking for