How to perform simultaneous multitrack recording with an Audigy 4 P

Dear Sir/Madam,
We are comming from the Uni'versity of Maribor, Slovenia. We recently buyed an Audigy 4 Pro Sound Blaster for our studio recording purposes. Here is the description of the problem:
We would like to record the speech database which will be used later to perform text to speech sinthesis (sampling rate of 96kHz, 24-bit resolution). Therefore, we need to SIMULTANEOUSLY record the stereo signals from 2 microphones located at different distances. That is, for each microphone we would have two channels which resulted in a requirement of recording 4 channels symultaneously!!!
We succeded to record the signals from either first or second microphone separately, but we couldn't record the stereo signals from the both microphones simultaneously!!! Namely, in the Creative mixer there is possible to select ONLY one recording input in a time. But we need to record the signal simultaneously from two inputs.
Our question are:
. How can we perform simultaneous, multitrack recording with an Audigy 4 Pro using two stereo inputs (e.g. from Line In and Line In 2 inputs)?
2. Which -from Creative recommended- recording software supports this multritrack recording? Namely, the recordings from the two microphones should be aligned in time as much as possible.
Thank you very much for your help!
Altair

Hi
You need recording software (Cubasis (not sure), Cubase, Sonar, etc.) which supports
ASIO drivers and a 'multichannel' microphone pre-amp/mixer to get microphone(s) connected
'separately' into Audigy Input's.
ASIO driver gives more 'Input sources' to choose from compared to WDM's one stereo/2 mono
channel capability.
.jtp

Similar Messages

How to simultaneously multitrack record in GB for iPad?

Hi,
I'm running GB on my iPad 3, and I'm looking to get a Focusrite Scarlett 18i20 interface (via cc kit) to record guitars, keys and vocals.
How do I arm tracks for recording and assign tracks to different interface inputs?
I want to record from multiple sources at the same time.
Anyone able to help? I can't see any help on this in the online manual.
Thanks,
Rich

So, I'll answer my own question.
Just called focusrite and the limitation is with GB for iPad - you can only record one track at a time.
They suggested using Auria, which allows simultaneous multitrack recording, which the Focusrite Scarlett 18i20 hardware does support.
So, there you go.

Hi guys, can you please explain how to perform automatic system scan with CleanApp - it looks like it wants me to manually chose files to delete and I just want an automatic scan (like cleanmymac does)

Hi guys, can you please explain how to perform automatic system scan with CleanApp - it looks like it wants me to manually chose files to delete and I just want an automatic scan (like cleanmymac does)

Slowness...First Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions. No need to report Permissions errors....we all get them.
Here's Freeing up Disk Space.
DALE

How can I do MultiTrack recording on MacBook Pro?

Hey guys, I just bought Logic Express 9 to record separate audio for my Canon T2i DSLR.
how can I do Muti-Track recording on my MacBook Pro out door?
Will the Behringer USB mixer allow me to do MultiTrack recording or any other mixer?
Thanks in advance,
CJ

The only thing I'll add is do not look past the current crop of USB interfaces. I just recorded 14 tracks at once to my macbook pro, a 4 year old model, with a new Tascam US-1641 USB interface. 100% perfect. I've had several MOTU, Lexicon, Roland and Presonus interfaces. All have been Firewire until I tried the Tascam USB. Works exactly the same as all my firewire models. Same latency, same stability, etc.
So please don't focus solely on firewire interfaces. There are some nice USB ones too. In fact, there is a new tascam US-800 model that can do 8 at a time, is very small and compact, buss powered (meaning no power supplies to plug in) and can be had for a little over $200.
Basically, any usb or firewire interface that has 4+ actual analog inputs (be careful, many low-input inferfaces actually have TWO analog inputs, and two digital...you probably need 4 analog inputs).

How many min. can i record with voice record with MuVo V200 1

Hi,
I'm going to buy the Creative MuVo V200 GB.
Now my questions about this player.
How many minutes can i record over voice recording.
Maybe someone can tell me how much Megabytes minute of recording will take.
Are there different quality levels of recording?
In which format does the player save the recordings?
I will use the player to record lectures at the uni'versity.
Did anyone have done this?

Recording with SB Audigy LS

I have an Audigy LS that works fine as far as playing audio or streaming audio over the Internet, but I can get Audacity to record either steaming audio or line-in audio. If I set audacity to OSS: /dev/dsp, the mixer tool bar doesn't even show up. If I set audacity to one of the ALSA settings, the mixer tool bar does show up, but it doesn't record. Audacity will also change the playback speed on any files I am already streaming.
I don't know if this has anything to do with the problems, but I read somewhere that this soundcard does not have hardware mixing. I also have to set IEC958 to mute in order to play audio files.
I would be willing to replace this card with either the M-Audio Revolution 5.1. or 7.1 if it would solve these problems. M-Audio has been recommend in this forum, but no one seemed to address the recording issue. I would be interested in any comments concerning the above problems or any experience recording with the Revolution sound cards. I would also be interested in any differences between the two cards other than 5 channels vs. 7 channels.
Thanks
Larry

B15HOP wrote:
I have a similar problem too. The problem is to do with the mic not turning on. If you press tab in alsamixer, it shows what the sound card will record and what volume settings for each input line. Yet for me, even with 100% volume on mic, i can not record because mic won't "turn on"
http://bbs.archlinux.org/viewtopic.php?id=44837
It's a real annoyance as this sound card worked worked really well in skype... not anymore.
I admit that I am not an audio guru which is partially due to the fact that things always worked. The joke is that I have an old SB Live (BUDGET) on my old computer which can record streaming audio and Line-in audio. This machine is also running Arch so its not the OS.
One of the best suggestions I've seen on this forum is to pick up an old SB on Ebay. It totally boggles my mind that such a mundane task should be such a problem. I may swap cards which is NOT the solution I wanted since I also use window on the old machine to run Replay Radio.
Good Luck

Need help in multitrack recording with Audigy 4 pro

Hi there,?I have an audigy 4 pro soundplaster caed and use it with Cubase LE. I haven't figured out yet how to record the several tracks onto seperate?channels simultaneously. All inputs of the soundcard work and I know how to assign the channels to the tracks in cubase. But in the end the same is coming out of all... I have figured out that in the Audigy mixing console you need to select the input source first, but I only can select one. If I select 'what you hear' I can use all - but not seperated. Someone knows how to deal with it'sAny help hugely appreciated
!!! G

gun wrote:
Hi,
wow, I got a big step further with this, thanks.
Yes, after pulling the window down ai discovered many moretracks. I also managed to get a signal in cubase by pressing the monitor item. And I could remap inputs. I got my input 3 set up fine. It's in the devie dislaplyed as L and R but witchever I choose works.
But for my second track it only lets my choose the other otpion of the same input (if trach one is Line 3L its has to be Line 3R for the other input. I did remap the track to to use line in but no signal and in the windows control mixer I still can only select one recording source but it doesn't correspondent with cubase, cubase records line in 3 whichever thing is ticked in the windows mixer.
Line in does go into my soundcards as I can hear it through the speakers but no further.
I uploaded the manual onto my own webspace, seemed the simplest thing: http://www.magicviolin.co.uk/Cubase%20LE%20manual.pdf
Thanks so much again, I actually feel slightly positi've now that I might it even get working...
The Manual cleared a lot. LE seem to have a bit stripped settings compared to SX, but the logic seem to be the same (maybe LE is ~ SE/SX .0).
As you have Audigy 4 Pro there, you should see quite many input channels listed on "VST Inputs" -panel. The bad thing seems to be, you have no names for inputs but they're listed as PCI REC & 2, PCI REC 2 & 3, etc. mono pairs. Now you need to examine which one is which (i.e. does PCI REC & 2 mean Audigy's Line-In L/R, PCI REC 3 & 4 as LineIn 2 L/R, etc.). See below.
NOTE: Inputs being as pairs of L/R channels means you can record to 2 tracks using one stereo input w/ mono connections (i.e. guitar through LineIn L and Bass through LineIn R). Tracks need to be set as mono. When you have one stereo connection or track set to stereo, you get the same signal from LineIn L and R to those tracks you have set the LineIn L or R as input source.
CT Surround Mixer settings:
- open those source channels you're using
- if you use any Creative ASIO driver the .rec source selector has no effect
Project settings:
With any Creative ASIO driver you need to set (Project properties)
- bit-depth (record format) to 6-bit (or 24-bit if using "ASIO 24/96 driver") and
- samplerate to 48000 Hz (or to 96 kHz when using the "ASIO 24/96 driver")
See - Activating and selecting VST Inputs - Manual p.2-25 ->:
- you need to know which inputs are included to AnalogMix() --> you see these listed on Creative Surround Mixer --> rec. source selector.
- give those inputs (label) the same name they appear on Creative Surround Mixer (i.e. Auxiliary, Line-In, Microphone, etc.)
--> you need to do these settings once if you save the (empty) project as a template
See - Mixer p. 7.37 (Audio channel strips)-->:
- here you can select the Input -channels (remember, which ones are in same group "AnalogMix ()" because they uses the same signal path and therefore gets recorded to all tracks having this source selected)
Hope you get things cleared, and remember save a well functioning project as Template (you can make templates with various settings (like one for 6/48 w/ audio tracks, other for 24/96 w/ audio tracks, and next for 6/48 w/ audio and MIDI tracks, etc.).
If you need 'some' VST effects/instruments for your recordings, KVR is best place to start from.
jutapaMessage Edited by jutapa on 04-06-2006 0:43 PM

How to send single person-records with HRMD_A Idoc and change Idoc header?

Hello group,
we have different companies in our SAP system (BUKRS). Now when an infotype is changed the changepointers are activated and using program RBDMIDOC we can send Idocs of type HRMD_A to f.i. files. In order to have these files distributed to different parties depending on BUKRS of the person we would like to have HRMD_A to deliver single records, an Idoc for each person and the Idoc header fields for variant and function should be filled so that the partner profile would distribute the Idoc to the partie.
Is this possible? And if yes how?
Regards, Léon Hoeneveld The Netherlands

Transaction PFAL lets me trigger the Idoc manually, but with a job for RBDMIDOC this is automatically.
I found fm RH_HRMD_BLOCK_SIZE in wich you can enhance the code to set the block size for an Idoc-type to 1.
But now I still have to change the Idoc header with an enhancement of user-exit.
HRALE00OUTBOUND_IDOC BADi does not have the functionallity.
Regards, Léon Hoeneveld

How to select Most recent record with rest of record in ascending order...?

Dear Expert,
I have one table called Tab1 & have a lot columns. For this schenario, i mentioned few of the columns.
The columns are
product_type varchar2(100),
curr_date date (storing with time stamp),
other1_cloumn varchar2(10),
other2_cloumn varchar2(10)
Now I want to display all the records in ascending order except most recent record for every product_type || Union all || Most recent records in ascending order in single query.
For example...
product_type curr_date date other1_cloumn other2_cloumn
1, "10-May-2005 10:10:10", 10, 10
1, "10-May-2005 10:10:11", 10, 10
1, "10-May-2005 10:10:12", 10, 10
1, "10-May-2005 10:10:09", 10, 10
2, "10-May-2005 10:10:10", 10, 10
2, "10-May-2005 10:10:11", 10, 10
2, "10-May-2005 10:10:12", 10, 10
2, "10-May-2005 10:10:09", 10, 10
3, "10-May-2005 10:10:10", 10, 10
3, "10-May-2005 10:10:11", 10, 10
3, "10-May-2005 10:10:12", 10, 10
3, "10-May-2005 10:10:09", 10, 10
Now I want to display (OUTPUT) like...
1, "10-May-2005 10:10:10", 10, 10
1, "10-May-2005 10:10:11", 10, 10
1, "10-May-2005 10:10:09", 10, 10
2, "10-May-2005 10:10:10", 10, 10
2, "10-May-2005 10:10:11", 10, 10
2, "10-May-2005 10:10:09", 10, 10
3, "10-May-2005 10:10:10", 10, 10
3, "10-May-2005 10:10:11", 10, 10
3, "10-May-2005 10:10:09", 10, 10
1, "10-May-2005 10:10:12", 10, 10
2, "10-May-2005 10:10:12", 10, 10
3, "10-May-2005 10:10:12", 10, 10
Plz, provide a solution....

I want to display like...
select * from tab1 where (product_type,curr_date) in
(select product_type,max(curr_date) from tab1 group by product_type)
order by product_type
Union All
(select * from tab1 where (product_type,curr_date) NOT IN
(select product_type,max(curr_date) from tab1 group by product_type)
order by product_type)
But, In the above case, The ORDER BY Clause will not work...How to get this one...?
I mean.. I want to display all the records in ascending order except Most recent record base on Product type and next I want to display Most recent record in ascending order. I want to display both cases in a single query...?

How to delete a master record with transaction data?

Hi,
Iam able to delete master record(GL/Vendor/Customer)through OBR2 when there is no transaction data in those respective master records. Despite of clearing all open items in a particular vendor Account, Iam unable to delete that master record. Please suggest me how we can delete vendor master data having transactional data.
Thanks in Advance
Regards,
Satish

Hi...
Not sure whether this helps....you can mark the vendorrecord for deletion and later try to delete it.
Logistics >> Materials management >> Purchasing >>
(new menu) Master data >> Vendor >> Central >> Flag for deletion
try using XK06/FK06
Assign points if useful
Regards
Aravind

How to use sony ic recorder with macbook pro, how to use sony ic recorder with macbook pro

Anyone can help? I realise there seams to be no software to syncronise my IC rec with my Mac.. I had one for my PC.. but not for Mac??

instructions from Apple: http://support.apple.com/kb/HT3131

How can i create a record with a qualified or a hierarchy look up field

if have the api to create a this record by one time or must to create lookup then create main record???

Hi,
The process is to first populate the values in the lookup(can be a part of main table or qualified table) and hierarchy tables. Once done, create the main table record and then fill the details in the qualified table for that particular main table record. Since the details of the qualified table are stored in the link established between main table record and qualified table record hence you cannot first create a qualified table record before creating main table record.
Also when you first create a main table record containing set of lookup & hierarchy fields then you wont find the values in the drop down since you have not filled the lookup tables, hence we always fill the lookup table data first.
Regards,
Jitesh Talreja

How to display a db record with a variable number of joined records

I'm building a website for an airshow http://www.hollisterairshow.com and the organiser would like to post a list of things he needs for the show and have people respond via the website. For example, he might need 20 tents and potentially up to 20 people could respond, each offering one tent, or fewer people could each offer several tents. I'd like to create a view showing the item needed and underneath it one row for each offer he receives. I already have a couple of tables defined, one called "needs" and the other called "offers" , the "offers" table has a column called "needId" which is the index from the needs table.
So far I have created a recordset to join the tables but each row contains the need and the offer so I'm seeing the need repeated on each row and I only want to see it once. Here's the SQL generated by DW CS4
SELECT needs.needId, needs.title, needs.`description`, needs.quantity, needs.needMet, offers.needId, offers.offerId, offers.name, offers.email, offers.phone, offers.quantity, offers.`comment`
FROM needs, offers
WHERE needs.needId = offers.needId
ORDER BY needs.title
I'm sure there must be a simple solution to this but I'm unable to figure it out. I'm new to SQL and doing this as a volunteer for the airshow.
Thanks,
Tony

Thanks so much, for pointing this out. This looks like it'll do what I need. I think I understand the code so I'll modify it and try it.
It looks like it will create an output that looks something like this
Need1    Offer 1
             Offer 2
             Offer 3
Need 2     Offer 1
               Offer 2
etc....
This is certainly workable. Ideally I'd like to create something like this
Need 1
     Offer 1
     Offer 2
     Offer 3
Need 2
     Offer 1
     Offer 2
Is there a way to do this? Would I need a different recordset or am I still looking at a layout issue?
Thanks again for the help.
Tony

Recording with SB Audigy 2

I am trying to record multiple tracks, but keep each track seperate and then mix them. I have no problem recording a single track. When I record the second track, I have the first track mixing and recording into the second track. I need to hear the first track as I record the second but I do not want the second track to contain the audio from the first. Is this possible and if so what do I need to do?
thanks in advance,
tom

See this standard FAQ
http://www.adobeforums.com/webx/.3bbe20ee.2ccd2a56/0

Audigy 2 Plantium (Pro)/Audigy 4 Multitrack Record

Hi!
I've read the following in the product-specification for Audigy 2 Platinum Pro: "It supports ASIO 2.0 and SoundFont 2. and can record up to 6 simultaneous channels at 24-bit/96kHz."
First Question: Can this six channels only be mixed in the mixing console or do they work like simultaneous soundcars?
For example I would like to do multitrack recording with cool edit pro/Adobe Audition and in this Program I normally can only choose the soundcard that should be used - not the inputs.
Second Question: I've that works - how many channels can be used with a normal Audigy 2 Platinum or an Audigy 4 Pro
So if anybody knows anything about this stuff, please tell me
with best regards, Thomas

Jeremy
I am in a very smiliar situation as the original poster and i need to know how to access the ASIO mixing controls. is the ASIO 2 driver something i need to download or install seperately? can i just use the "creative mixer" in my system tray to mix the various inputs on my sound card for multitrack recording? The user manual and website include absoultely no information as to how to do this, but they all claim that it can be done.
To be more clear about what i wish to do, i am using adobe audition (which supports multitrack recording) and would like to simultaneously record using multiple microphones that would each go to seperate tracks in the audition software. I am using the audigy 2z platinum pro if that hel
ps.
thanks

How to perform simultaneous multitrack recording with an Audigy 4 P

Similar Messages

Maybe you are looking for