How to perform the hardware setup without the CD?

Question

In most of the support page I read, I am finding info about drivers and computer connectivity with the printer.  In many occasion, we can read a paragraph like this one: 
Important: Set up the HP hardware before installing the software. If you have not already done so, find the hardware setup document for your printer before starting the following steps.
Excerpt trom http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02273853&tmp_task=setupCategory&cc=us&dlc=en&lc​...
This is exactly what I am trying to achieve, but nowhere HP seems to be providing guidance about this.  At least that I can find.  Where can I find the bundle to download that will allow me to connect the prionter to the WIFI network?  Note that the automatic connection WPS generates an error on the printer.  My router is a bran new Linksys EA6350.
Please do not refer me to the driver download page, this is not what I am looking for. 
Thanks, 

Answer 1

New plan...  I have done some reaserach and may have found a way!
We will put the computer on the printers network, and then print a report to get the printers IP address. At this point we can access the embedded web server (EWS) and run the wireless wizard from there. Once the printer is on the home network with the router we can put the computer back on the network and vuala the printer and computer will both be on your network.
To restore network defaults - since you have done this before I imagine you know how but for others who may view the post, here are the steps
Press the Wireless button
Select Wireless Settings
Scroll down and select Restore Network Defaults.  Press Yes to acknowledge
The radio will turn off (the blue LED will go out).  You may need to press the wireless button again to Enable Wireless
Put the computer on the printers network (temporary)
1. Click on the Airport symbol on the top left side of the Mac screen
2. Choose the network that look relative to the printer (might say HP setup or some variation of your printer name) - it may take a few minutes for it to appear
Print the wireless network test - wait a few minutes to ensure the and computer have established an adhoc connection otherwise the report will not have an IP address
Press the Scan button (it also the Wireless menu button)
Select Wireless Settings
Navigate to Wireless test and select.
The Wireless Network Test prints, look for and note the IP address.
Open an Internet browser (Safari) and enter the IP address into the URL (address bar).
Click on the network tab, on the left click on wireless or 802.11.
At this point we are looking fore "start wizard" should be on the right hand side.
Once we have successful configured the printer for your network you can put your computer back on your own network.
Now you can add the printer to the System Preferences and print
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP