How to permanently add adjustments to the adjustment tab...

I want to add the "Straighten" to the "Adjustments" tab in Aperture 3.0. I read how to do this in "Aperture Help," and did it, but, when I click on a different picture, it disappears. How do I add it permanently?

You should be able do this as follows:
1 - Select an image that does not have the straighten adjustment applied yet
2 - Select 'Straighten' under the Adjustments drop-down to place in the pane
3 - Use the Actions menu (cog wheel) in the Straighten adjustment section and select 'Add to default set' option
This should add the Straighten adjustment to the default adjustments displayed for all pictures.
It works on my system, so that is all I have to verify. There may be other issues going on if you can't do this on your system if running AP3.
Good luck.

Similar Messages

  • I can't see the adjustments under the Adjustment tab in Aperture. Where is the data?

    Several months ago I dragged photos from Aperture into a Burn Folder on my Desktop. Today I dragged the photos from the Burn Folder on my Desktop into Aperture. My photos are all still edited, but I can't see any of the adjustments I made under the Adjustment Tab in Aperture. Where is that data? How do I get it back?

    I'll cover most of this because I'm too busy to trim it, but be sure to read Léonie's post.
    barbst wrote:
    Can you explain to me the difference between a Preview and the Master image? I checked my preferences and they are set "Photo Preview: Half Size" and "Photo Preview quality: 8 Medium".
    The Master is now known as the Original.  (Apple changed the term.  I don't know why.)  The "Original" is the term Aperture uses to designate the image-format file you imported into your Library.  When you import, Aperture creates a record in its database and creates an Image that you see in the Browser and the Viewer.  Every Image has an Original.
    Aperture creates additional files that it uses.  Among these are a Version, which is a text file containing instructions regarding adjustments and metadata changes you make, some thumbnails, which are image-format files in small dimensions, and a Preview, which is a JPG-format file that is automatically updated to include any adjustments you have made.
    The Original is _never_ altered.  Aperture is a _non-destructive_ photo developing workshop.  "Non-destructive" means that your original files (the ones that Aperture calls "Originals" once you import them) are never altered.
    The Preview is _always_ altered.  It always is updated to include all the adjustments you have made to any Image.
    As you know, you set the JPG parameters (size and quality) for your Previews in Aperture's preferences.
    Does this mean that all the photos I have dragged to Burn Folders and burned to DVDs are lesser quality than my Masters in my Aperture Library? I thought I was backing up the Masters!
    Sorry for the bad news, but the latter is not correct, and the former is.  When you drag an Image from the Browser or the Viewer, Aperture creates a copy of that Image's Preview.  (The User Manual should make this clear.  Currently it is incorrect.)
    Note, too, that your Masters (now "Originals") are never altered.  What you might have wanted to back up were the Images in your Library.  Now -- get ready for the weird part -- those Images do not exist as image-format files.  There is no file that we can access in order to to back-up an Image.  You can either create share-able image-format files from your Images, and back those up, or you can back up your Aperture Library, which, when restored, will give you the opportunity to create share-able image-format files from your Images.
    Aperture is structured this way -- it saves the imported file, untouched, and text instructions telling it how to create your Images on-the-fly -- specifically to save the space you would need to store full-size files of every Image in your Library.  Rather than save "the thing itself", it saves just what it needs to create "the thing itself".  The storage savings are enormous.
    This is why your workflow is (in general): import, make adjustments and add metadata, sort, group, and organize, and export _only when you need an image-format file to share with another program_.  You then share that file, and delete it (because if you need another, you can create it by exporting from Aperture).
    How about when I drag photos from my Aperture library to an external hard drive icon on my desktop? Am I dragging the Masters or Previews? If so, are the Previews lesser quality than the Masters in my Aperture Library?
    When you drag Images from Aperture, you create copies of those Images' Previews.  If you haven't made any adjustments, then they are Previews of your Masters (now called "Originals").  But Previews are JPGs with the dimensions and quality you told Aperture to use, whereas your Originals are whatever format, dimensions, and quality they were when you imported those files.  The quality of an Image's Preview is always less than the quality of that Image's Original.  (I'm using "quality" to mean "amount of useable data".)
    You should test this right now.  Create a new Finder folder.  In Aperture, select an Image with adjustments applied.  Drag it into your newly-created Finder folder.  Then export it's Original into the Finder folder (File ▹ Export ▹ Original).  Then export the Version with whatever settings you want (File ▹ Export ▹ Version).  Compare the three files you just created.
    I think I'm going to be sick! Please tell me it isn't so! I have 1000s of beautiful photos from trips on both DVDs and a Western Digital external hard drive, but I dragged them all from my Aperture Library to either a Burn Folder or a Western Digital icon on my desktop, then I deleted the originals from my Aperture Library. I did this to make room on my Mac Book Pro hard drive. This is how Apple One on One taught me to backup my photos!
    I'm sorry  .
    To back up your Originals, back them up.  They are files.  If they are in your Library, they get backed up when you back up your Library.
    To back up your Images, either make files from them, and back up those files, or ... back up your Library with the knowledge that that way you can create new files from your Images after restoring your Library from your back-up.
    To shrink the size of your Library so that it leaves more space on your system drive:
    - remove un-needed Images
    - relocate some Images' Originals to a second drive (almost always external).  Aperture makes this easy to do.
    Alternative, put your entire Library on a second drive.  Libraries on external drives connected via USB-3 or Thunderbolt work fine.
    In general, a photographer's commitment to an image-management database system (of which Aperture is one) is complete:  it works best when it is all-enclusive.  I recommend against removing Images from your Library either to save space or to archive them.  My personal Library catalogues all my photographs.  Using it I can find, and make available, any photo I've taken and decided to keep.  Once I decide to keep it, it stays -- forever -- as a record in my Library.
    Note that your "Library Set" (I just made that up, but it should exist) includes your Library package (that shows as a file in Finder) and any Referenced Originals that belong to Images in your Library.  You must back up your entire Library Set.
    The Geniuses at the Apple Store generally do great jobs in demanding circumstances.  They are, by need, generalists who must be reasonably adept with a lot of software.  It seems you were (badly) misinformed.  Please recommend this post to the one who coached you, so that s/he makes sure that others aren't similarly misled.
    HTH,
    --Kirby.

  • Under the tools/options/applications tab Telnet is not listed. I have 2 computers running the same OS and on 1 telnet is listed under the applications tab and on the other it is not. How can I add Telnet to the applications tab.

    This is an issue in both the 3.x and the 4.x versions. On the computer that has telnet listed I have it setup so that when I enter telnet:x.x.x.x it opens a putty session. I have created a bunch of bookmarks using the telnet:x.x.x.x format and exported them to my peers but some have telnet option and some do not. Telnet is enabled on there PC's

    Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
              although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

  • I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?

    I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?

    Have icon but cannot connect - Please Help.
    Mine is Gen. 2 - Model MC572C/A. I have the YouTube icon but cannot access YouTube.  Message says "No content was found - There is a problem communicating with YouTube. Try again later."  This problem has been for at least 1 month now.  Any ideas?

  • HT4059 how can i add books to the library on my iphone 4s

    How can I add books to the library on my 4s?

    If the photos that you are wanting to delete are also in your Camera Roll then you can delete them from the camera roll

  • How do I add apps to the dock on my mac?

    how do I add apps to the dock on my mac?

    Select the application you wish to put in the Dock, then drag it into the left side of the Dock's sizing gadget.

  • Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

    On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
    Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
    <input type="file" name="file" accept="image/*" id="file" />
    mimeTypes.rdf does not seem to allow this.

    ''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
    You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
    <pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
    For details, see
    * [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

  • I have an ipod touch and the contacts icon is missing.  How can you add it to the home screen?

    I can't find the contacts icon... How can you add this to the home screen

    Every iPod touch has a contacts icon. It might be hiding. You can try Settings > General > Reset > Reset Home Screen Layout.

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • How can I add photos in the Camera roll to My photo stream if they were taken prior to icloud being activated?

    How can I add photos in the Camera roll to My photo stream if they were taken prior to icloud being activated?

    You have a couple of options:
    Open the photos one at a time and take a screenshot.  This will add a new low resolution copy of the photo to the camera roll, which will then upload to your photo stream;
    Email the photos one at a time to yourself, then save the attached photos to your camera roll.  This will add a copy of the photo at full resolution to your camera roll and upload to photo stream;
    Use an app like PhotoSync, which will allow you to wirelessly transfer copies of all your old photos to your computer all at once.  Then delete these photos from your camera roll and use PhotoSync to transfer them back from your computer to your camera roll.  These will be the original resolution and will upload to your photo stream.  (You need an app like this because iTunes will not transfer photos back to your camera roll, where they must be in order to add to your photo stream.)

  • How can i add subfolders in the mailsystem to classified my mails

    how can i add subfolders in the mailsystem to classified my mails similar to outlook. Somebody with idea?-

    You can't do it directly on the iPad. If your email account is setup as IMAP, create the folders on the server (either in Outlook or webmail) and then the folders will appear in iPad Mail.

  • In the middle of creating a book in aperture I need more photos. How can I add them to the browser at this stage?

    In the middle of creating a book in Aperture I need more photos. How can I add them to the browser at this stage?

    In the middle of creating a book in Aperture I need more photos. How can I add them to the browser at this stage?
    You can add more images to your book, by dragging them from the browser to your book album. Switch to the Library Inspector, select the album or project with the images in the source list, and then drag these images onto the book icon. That will add them to the book album, and then double click the book album again to continue working with the book.
    Regards
    Léonie

  • How do i add photos to the photo array when creating a book using iphoto 8.1.2?  the book doesn't accept the albums and foldlers i drag and drop.

    how do i add photos to the photo array when creating a book using iphoto 8.1.2?  the book doesn't accept the albums and foldlers i drag and drop.

    I'd suggest you ask this question in the iPhoto forums:
    iPhoto
    Posting here is unnecessarily limiting the people who'll see your question to those running iMacs.
    Regards.

  • How do I get rid of the adjust window in iphoto.  It is stuck there and it won't go away.

    How do I get rid of the 'adjust' window on my photo.  I click on the x and it does nothing.  Is it hung?  I thought apple didn't hang.

    Close iPhoto and do the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • How do I Add Authentication to the WSDL generated?

    Hi Experts,
    I am creating web service in CAF to get All task assigned to a user using BPM API.
    The WSDL generated while testing from wsnavigator is picking up as a guest user even if I am entering the user details in invocation parameters.
    Can some one tell me how do I add authentication to the WSDL I have generated in CAF?
    Thanks in Advance
    Kumar.

    Hi Kumar,
    You Can find the above Section in : Go to http://hostname:port/nwa and open Configuration--->Connectivity --> Single Service Administration and open Service Definitions tab and select the application service for which you want to create the Authentication.
    Cheers
    Piyas

Maybe you are looking for