How to permanently connect to a minimal without being on the same network?

I'm trying to connect my mini-mac to my mac book pro permanently so that they will appear in each other's finders even when they are not on the same network. I've done it before but I can't remember how I did it. Help?

Hello,
If you can download the driver on a computer that does have access to the internet you can transfer the file to the other computer using a USB Drive.
I work for HP.

Similar Messages

HT4356 How can I tell if my AirPrint printer is on the same network as my router

How can I tell if my printer is on the same network as my wireless router

iMac Obsessed wrote:
I've had my MacBook Pro Retina since the 17th and am only now realising that my firewall was not on. I've already connected to a network via ethernet at my job so that I can have access to the internet. How can I tell if my personal info is safe?
As long as you are behind a router, you don't need to have your firewall turned on at all, in fact it probably slows your computer and/or internet connection down a bit. The only time you need it is to either protect yourself against intrusion from others on your local network or if you hook your computer directly to a cable / DSL modem. See Thomas Reed's Do I Need a Firewall?

Can Management Studio connect to a server that is on the same network but not on the same domain?

Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain? I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
whether I am embarking on an exercise in futility.

Hello,
That's your issue!
Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
be rejected as your local computer user account is not the correct domain account.
You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
Edit:
I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
Sean Gallardy | Blog |
Twitter

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do i connect a wired pc, and wireless nb to same network?

is it possible to connect my desktop to a network with a wireless notebook without adding a wireless card to the desktop? I have a wrt54g wireless router.

On the back of the router you should have 4 ethernet output ports. If your desktop has a ethernet adapter all you need is a ethernet cable. This BTW is the prefered configuration as you will always have communication with the router even if there are wireless problems.

Can I authorize a computer without it being on the same network?

I bought a new computer. I want to transfer my itunes account to it. Do I really need to spend the money to make a direct connection between the two computers to do it?

Hi DP07:
Welcome to Apple Discussions!
That is one way to transfer the music from your old computer to your new computer. You can also use your iPod if you have one: http://docs.info.apple.com/article.html?artnum=300173

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do I set up 2 different IPOD's on the same computer without having all the songs and games from the first one copy onto the second one?

how do I set up 2 different IPOD's on the same computer without all the songs and games from 1 copying to the other?

- Disable autosyncing: go to iTunes>Preferences>Devices and check the box that says "Prevent iPods ...syncing">
- Connect the iPod and go to the music, apps and other panes for the iPod and check the boxes that say only sync the checked items.

How do I enable playback of music without intermission on the iPhone?

How do I enable playback of music without intermission on the iPhone?

Doing so on a 3G iPhone "can" take several hours. So, plug your phone into a wall outlet, then Settings>General>Reset>Erase All Content & Settings. When finished, your phone should look just like it did when first taken out of the box, with nothing but the OS on it. Conversely, you can connect it to iTunes & restore it as a "New" device. Just don't sync after you restore as new.

How do I make a wired connection to my Airport Extreme that will share the same network as any wireless connection to it?

Here's the set up.
I have a cable router into the house and then an Airport Extreme connected to it. Everything connects wirelessly to the Airport Extreme apart from one computer in the same room as it, which I wired into the AE with a cable (it's a gaming PC and has no wireless).
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.

There is nothing stopping you connecting to the wireless computers if you have sharing turned on..
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.
I don't quite follow this..
If the cable modem is a router.. the AE must be in bridge mode..
So all routing is handled by the cable modem router.. and the wireless clients will all be in the same IP range as the PC is.. please check that by opening the PC command window and type ipconfig /all
Then go to one of the wireless devices and check that it also has the same IP range.. eg,, 192.168.x.x and same router or gateway address eg 192.168.1.1 and same DNS.. which is the same as the router address..
Then in the command window of the PC use the command ping to see if the other devices respond.. ping it by name or by IPaddress.
If there is no response.. windows has decided it is in a public network.. and slammed up the firewalls.. make sure your network is set as home for location.. and make sure the firewalls .. you can have multiple if you have an internet security package are not blocking local network access.
Also remember PC and Mac in a network can take a bit of fiddling to see each other. But ping should always respond and in both directions.

TS3988 How can I verify my icloud account without being able to get mail from the account?

How do I verify my icloud account without being able to get mail from that account?

The verification email will be sent to your primary Apple ID email address.

HT2731 how to create a free apple id without puttin in the cridit card info?

how to create a free apple id without puttin in the cridit card info?
Card type "None" option is not available

Welcome to the Apple Community.
To be able to download free apps without a recognised method of payment or gift card.
Open iTunes and navigate to the app store. Select a free app to download. A simple way to do this is to scroll down to the top free apps box on the right hand side, hover your mouse over the first item and click on the free button that appears when you hover over it.
A pop up will open asking you to sign in with your Apple ID click "create new account", click continue to create your account. Check the box to accept the store terms and conditions and click continue.
Enter your email address, password, security question, and date of birth, click continue. Now, you will be asked to provide a payment method. Note now that the last option says "none".

How can you connect your 4th gen ipod touch to a 3g network?

how can you connect your 4th gen ipod touch to a 3g network?

Yu need a device like the following:
- A MiFi or similar. They are credit-card size devices that act a wifi hotspot and then connect to a cellulare network
- Use a smart phone that can act as a wifi hotspot to share it s cellular connection. An iPhone will also do that via bluetooth. You need to purchase a tethering plan .

I have upgrade my iphone 4 to ios 6 and from this moment every day my iphone go to block. it turn off and i can't turn on if i don't connect to charge connectors.. someone have the same problem? how can i solve it?

i have upgrade my iphone 4 to ios 6 and from this moment every day my iphone go to block. it turn off and i can't turn on if i don't connect to charge connectors.. someone have the same problem? how can i solve it?

I am experience a similar problem, my iphone 4 either turns off by itself or I am unable to answer a call. Everything just blocks. After contacting 2 different apple service spots still no answer as to how can we fix the problem. Worse, I am unable to revert back to ios 5.1.1 where everything worked just fine.

How to permanently connect to a minimal without being on the same network?

Similar Messages

Maybe you are looking for