How to physically stop mac pro 2008's startup chime

I have a 2008 Mac pro and since upgrading to Mavericks, nothing at all has stopped the startup chime from blaring out of the speakers at every startup. In normal use, it's annoying, during troubleshooting, it is intolerable in our quiet workplace.
None of the 3rd party software solutions for silencing the startup chime work in Mavericks.
The Terminal solution has not worked since Lion, I believe.
Muting the volume before shutdown does not work.
Inserting a headphone plug does not work.
The chime just will not shut up.
I am not interested in the replies whose main message is one of these: "Wow, never heard that one before." ; "What a small problem." ; "The startup chime is an important troubleshooting tool." ; "I don't have that problem / your problem is wrong."
But I would be very grateful for instructions on how to disconnect the speaker physically – preferably without doing any harm to my machine. If there is a software solution that works in Mavericks, I will try it but I am not aware of any.

Thanks, Johnb-one, I ruled out StartNinja because I have tried it before on a couple OS cats but it has never worked for me. I'll try it again just to be sure because they now claim Mavericks-compatibility.
As per my original post, I have already tried the other two suggestions. They have worked in the past up until Mountain Lion. Apple has really ramped up security around the startup chime with Mavericks.
As I understand, the startup chime is a completely separate entity from the OS itself. Some versions of OS X have allowed limited access to its volume but Mavericks removed all that.

Similar Messages

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

My Mac pro 2008, not running after the Apple logo, i rebooting and i rebooting

My Mac Pro 2008 no boot afther the Logo Apple, reboot, reboot and reboot only, and in XP, the graphic is pertubed with bad graphics ... the mémory it's good, and i thinks my card graphic is out. SRY for my english, it's not my language. Help my please, my apple care is finished 10/2011, and i will repared itself. Many thanks. Alain Muno

Not saying this IS your problem, but … I just went through avery similar problem with Mac Pro3,1. Here is my story.
On boot of any Mac OP system drive, internal or externalHDD, (Lion or Snow Leopard), original Mac Pro install CD, Snow Leopard CD,nothing. (Would only go to gray screen,apple logo, spinning gear that would stop spinning after about a minute.) But, it would boot on XP drive. However, in XP, on Windows black startupscreen, had alternating columns of two different patters of blue dots and XPgraphics were not as they should be (larger icons on desk top, slow response,different size of desk top (maybe 600x400 when it should have been1024x768). Supplied hardware test showedno failures. Took it to shop. Their better diagnostics showed nofailures. All peripherals (my drives, myCDs, etc, disconnected. (NOTE: they didnot try a new video card since they did not have one.) Still would not start even using their drives(external or internal). Shop tried a newlogic board. That did not work and theyput the original one back in. Shop saidall they could come up with was new processors. This was not a cost effective option and they had none to try.
After thinking about it more, I figured it could be thevideo card: the original 8800 GT that came with the Mac: that it was so bad itwould not start in Mac OS but would limp along in XP. I was all set to buy another vid card one-bay just to try. While doing thatresearch, came across several articles on the Internet that discussed vid cardfailure due to micro-cracks in some solder joints. These develop due to age/heat cycles. The proposed fix was to ‘reflow’ the solder. Figured it was worth a try before spendingthe money on a new vid card. Found thesedetailed instructions on youtube. http://www.youtube.com/watch?v=T7um_hZYom4 I followed the procedure, put the vid cardback in, and now it works just fine.
I did not and would not do this until I had ruled outeverything else. But, it has worked forothers and it did work for me.

Mac Pro 2008 - upgrade to 2010 model or not?

I have a Mac Pro 2008 2.8 gHz with 12GB RAM. I'm not running Premiere Pro CS5 which is great and seems to love RAM and processor speed. I also recently got a CUDA card to take advantage of it's GPU acceleration.
My question is: Should I get a new Mac Pro 2010, 6, 8, 12 core or just upgrade my RAM to say, 24GB and perhaps get some SSDs (maybe even in a RAID 0) as my boot drive.
The RAM upgrade will be in the $650 range, SSDs could be at least that. I'll need RAM anyway for a new model as my old RAM isn't compatible.
Getting a new model could set me back $5000 (or more) when it's all loaded.
I'm also a little disappointed in the 2010 Mac Pros, for example my 2008 Mac pro was a no-brainer, but now I'm ambivalent about this upgrade to 2010, thinking there may be new models out this year that fill in all the holes. I kind of feel like the 2010 Mac Pro upgrade was a little like the Final Cut Pro 7 upgrade, it was a stop gap because Apple needed to do something. I could be wrong about this though.
I know this is kind of a difficult question to answer, but if you have any opinions, please feel free to lend any advice.

PCIe 3.0
USB3
Intel SATA3 6G
Socket LGA1356
Socket LGA2011
3G SSD (by the time 4th Gen SSDs are out, one unit would make out our current SATA channel bandwidth)
Mid-range Xeon roadmap:
Socket LGA1356, a direct replacement for the current Socket LGA1366. The parts here are 6-core and 8-core Sandy Bridge single-socket and dual-socket capable but mid-range positioned Sandy Bridge Xeon - and, ultimately, Core i7 - parts with up to 20MB of L3 cache, three DDR3-1600 memory channels just like the existing LGA1366 Westmeres with one memory speed grade higher, and 24 PCIe v3 lanes on-chip.
The single external QPI v2 link runs at up to 8 gigatransfers/sec, or 32GB/sec bidirectional bandwidth, a 25 per cent speed up over the current generation, but also feeding a third more cores on each socket.
http://www.theinquirer.net/inquirer/feature/1811091/2011-intel-xeon-update-holy- socket-trinity
Intel is set to replace its current high-end socket, LGA1366, when it releases its new 8-cores processors in the Late 2011. This socket is expected to be released alongside Sandy Bridge-EX in Q3 2011, and will support 4 memory channels as well as 40× PCIe 3.0 lanes.
http://en.wikipedia.org/wiki/LGA_2011

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed

How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed? I noticed it occurring on projects where I used Miroslav Philharmonik. I keep getting prompted when opening the projects. I uninstalled Miroslav thinking it would stop, but it didn't.

Assuming you are talking about the boxed set of Logic Studio (Logic Pro 9) on DVDs the only solutions are to either borrow or purchase an external CD/DVD drive and use that with your new MBP.
Amazon sells a very reasonably priced 'Amazon Basics' external CD/DVD drive suitable for the process...
http://www.amazon.com/AmazonBasics-Portable-External-Optical-Drive/dp/B003M0NT1M /ref=sr_1_1?ie=UTF8&qid=1416924310&sr=8-1&keywords=CD+DVD+external+drive+amazon+ basics
Do NOT try and copy Logic across from your Mac to your MBP using something like Time Machine or Migration Assistant... 99% of the time, doing so results in all kind of weird issues later on.
Just install Logic pro 9 plus all it's content from scratch using the DVDs provided with Logic Studio Boxed set.....

Mac Pro 2008 - original memory

My originl memory finally bit the dust on my mac pro 2008. I pulled them and replaced with my other third party ram and back up and running.
does anyone know if Apple has a lifetime warranty on their ram? I heard they did? Will they replace the bad ones??
Im running Maverick 10.9.2, that i just downloaded yesterday; not sure how or if it would knock out ram or not.
I partitioned my hd into 2 segments and am running snow leopard on the other hd2. i booted into it and it also show to be bad ram.

Goede bron in Europa / EU - Nederland:
Apple/Mac specialists: www.mac4us.nl - [email protected]
Mac4us RAM-geheugen zijn echt goedkoper dan in de VS.
SAMSUNG - HYNIX - MICRON / ELPIDA Factory originele RAM-geheugen, Grade-A.
RAM geheugen voor Apple Mac Pro3, 1 2008 FBDIMM ECC met HYNIX chips en originele Apple heatsinks met 10 jaar garantie.

Compatible HD for Early Mac Pro 2008

Hello All,
I have two failing drives in my early Mac Pro 2008 and its time to find some replacements. The drives I need to replace are 1TB in size but I was looking to get something larger being 1.5TB. I read on a site that this version of Mac Pro supports a maximum of 4TB accross all the four bays which would essentially mean a maximum of 1TB for each Bay. Here is the link to the site: http://www.everymac.com/systems/apple/mac_pro/faq/mac-pro-how-to-upgrade-hard-dr ives-what-type-supported.html
Question I have, is whether its safe to add two 1.5TB drives (I also have a 640GB for the boot and 500GB additional data drive) or should I stick with 1TB drives? Also, is there any advantage in going beyond the 3Gb/s Serial ATA spec as I would suspect the faster drives would not be utilized to their capacity given the older data path in this machine.
Any help/advice would be appreciated and thanks in advance!
Cheers,
Vin.

You can put any make and any size 3.5" drive in all the bays in any combination. Also SATA 3's will work but of course at not their full maximum speed as you mentioned so SATA 2's are OK.
As an example, if you got 4 3TB's you could stuff them in there for a max of 12TB. Bit of overkill unless you really need all that space!
Personally I like Western Digital 1TB and 2TB blacks.
You might also want to consider using an SSD as your boot drive.
Update: I took a look at that site you linked. That 4TB limit is the max any one drive bay can support, not the total capacity across all 4 bays.

Adding USB 2.0 ports to a Mac Pro 2008

Hi,
I love my Mac Pro 2008! Great machine, awesome performance, but I need more ports Who needs only three USB ports in the back, that's a joke!
Anyways, I just bought 2 StarTech 6-port USB 2.0 PCI cards from an online vendor, but quickly found out that it didn't fit my Mac. The description of the card even says it is compatible with Mac OS X. I suspect that Apple have changed the PCI slots for something else in the Mac Pro 2008. What are they and can we buy USB card that fit those slots? If so where? I am desperate for more ports.

You may have stumbled upon or checked some of the support pages?
http://www.apple.com/support/macpro/
- which has a link to an article titled "about your PCI Express slots"
http://docs.info.apple.com/article.html?artnum=304122
Specs 2008: http://support.apple.com/kb/SP11:
PCI Express expansion7
Three open full-length PCI Express expansion slots
One PCI Express 2.0 x16 slot
Two PCI Express x4 slots
And of course support for up to four PCI Express video cards; Fibre Channel; Mac Pro RAID.
You could install a powered USB hub, or FW/USB2, as long as you have free slots for more. I have FW800, a 1x Sonnet Tempo (couple storage drives), and a 4x Tempo (multiple RAID sets; Port Multiplier card and multi-drive enclosures and 4 channels).

Mac Pro 2008 Can't start Windows 7 / 8 Installer

I'm trying to load Windows 8 (And have previously tried everything with Windows 7) on my Mac Pro early 2008 with Mountain Lion, and cannot get the installers to initiate.
When I start the bootcamp assistant and reboot, my mac freezes before ever getting to the installer. When I reboot and hold option to manually select the installer, it freezes as soon as I select it. I've tried this from a DVD, USB, and even an install partition i setup on my HD, all with the same freezing results. This is a legitimate copy of Windows 8 system builder I'm working with and have installed it perfectly in Parallels.
I should note I upgraded my video card a long time ago to a gt 120, so I'm wondering if the video card might be the problem. I've installed Windows 7 with this video card in the past so I'm guessing this is a Mountain Lion/Bootcamp 5 issue.
Has anyone else with a Mac Pro 2008 succesfully installed Windows 7/8 from Mountain Lion/Bootcamp 5?
Any input would be immensely appreciated!

There are no Windows 8 Bootcamp drivers. Windows 8 is not supported.
Use Parallels or Fusion to install Windows 8. By doing so you eliminate the need for drivers since the virtual machine creates virtual hardware and drivers.
Once the Windows 8 Bootcamp drivers are developed and released you can then install using Bootcamp Assistant.
Read this forum. Some people are posting that they had some success with the Bootcamp install. but if you have to rely on your computer then don't take the chance.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Boot Camp support:
http://www.apple.com/support/bootcamp/
Boot Camp FAQ:
http://support.apple.com/kb/HT5639?viewlocale=en_US

Mac Pro 2008 or iMac 27 i7 ? Which to choose?

I am looking to upgrade to a faster Mac from my current Macbook Pro and decided either on an iMac 27 inch i7 2.8 GHz 8 Gigs RAM 4870 Video card or buy a used Mac Pro 2008 with 2 x 2.8GHz 4 Core (8 core total) with 10 Gigs RAM and an 8800GT video card.
Both come to almost the same price. Problem is I don't know which to get. The system will be used mainly for software development, running windows 7 and linux as Virtual Machine, some light gaming, and music (sampling, etc)
I love the iMac's LED screen and the i7 certainly is fast but love the Mac Pro's expandability in terms of hard drives and memory and I would use it on my 30 inch LCD. That said, would I ever go past the Mac Pro's configuration of 2 TB's of drives (maybe) and more than 10 Gigs RAM (don't know)? You're stuck with the iMac in terms of hard drives forced to add slow external cases.
The Mac Pro is over 2 years old at this point but I know the Mac Pro is a work horse and the iMac has had issues.
Anyone have an opinion on this? Might it be worth saving some more cash (although would take another 6 months) and getting a 2009 Mac Pro?
Let me know...

Asked a lot and the new iMac makes it look better, but not for triple boot unless you stict to VMs most of the time. The freedom of having alternate OSs on their own drives and such.
AppleInsider gave the high end iMac makes sense if you go that route, and if you would need a monitor as well?
Barefeats has posted a number of tests of the iMacs
http://www.barefeats.com
Even the 2009 $2149 4-core is no slouch and easier to find and work with.
At that price, you are close to the 2010. So wait another 36 hrs.
http://www.apple.com/macpro/specs.html
http://www.barefeats.com/nehal17.html
Apple Specials change during the day, they disappear quickly.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro

Hi, I have a mac pro 2008 and I was wondering if it possible to connect to the apple cinema 27'' display

Hi, I have a mac pro 2008 eand I was wondering if it possible to connect to the apple cinema 27'' display.

Yes using an apple 5770 video card and a dual link DVI adapter like the Atlona DP400 adapter.
Look at the hits in this google search for lots of other discussions on this topic.

How do you new Mac Pro owners like your machine with Logic?

Don't mean to be a PITA but I need to get this right before I drop three to five grand on a new set of music tools. I'm trying to decide between Mac Pro and iMac for use with Logic. Seems there are a lot of posts regarding glitches with the new Mac Pro and Logic, whereas the posts from people with older G4s and G5s seem to indicate they are running rock solid. So you new Mac Pro folks or anyone else, please weigh in. Is the new Mac Pro "glitch heavy" or is it just a matter of tweaking the system to where it runs smooth? In general, how do you new Mac Pro folks like the way it works with Logic?

I'm mostly pleased with my MacPro 2.66. Almost no crashes with Logic, although I experience a few more bugs here and there than with my G4. Occasional CoreAudio errors, I have to restart CoreAudio if my external word clock is set to the wrong sample rate when I open a session, there seems to be a bug between high fader levels (above +4dB) and panning... little things like that.
Then again, compared to my G4, the FireWire bus is screaming fast--with most sessions, I can run a buffer of 128 samples at 96k with my MOTU 828mkII, while my G4 would sometimes glitch at 96k with 512 samples. At 96k, 256 samples, my MacPro/828mkII rig is rock-solid... I informally tested it by recording 12 test tracks simultaneously for 20 minutes, with the CPU nearly maxed out (which was difficult to do--took a bunch of Space Designers and Ultrabeats)--absolutely zero clicks or pops.
And of course, WAY more processing power than my G4.
I'm assuming that MacPro compatibility is a fairly high priority for Apple these days, so hopefully the bugs will get worked out soon. And as things are, Logic is definitely usable on a MacPro--the bugs I encounter rarely slow down my work.
So, far from perfect, but as far as new technology goes, I'd say Logic on the MacPro is above average.
Good luck!
James
[email protected]

3 Tb hard drive in Mac Pro 2008?

Hello
I've bought a 3Tb Western Digital Caviar Green Hard Drive, put it in a Welland enclosure, formatted it with Windows 7 into three partitions (all exFAT), two just over 1 Tb and the third only 32 Gb. I was hoping that my Mac Pro 2008 would be able to see it, but no. Any hints?
Cheers
Morrie K

anything written about "max drive capacity" was pure nonsense and marketing based on just what was available at the time and meaningless. there are no such limits and it would fly in the face of SATA and GUID
Apple implemented GPT back in 10.4.6 (earlier but very hard to know and test too)
You can throw some 4TB drives in there.
The only product that does not: Apple Pro RAID card! it is limited to 2.2TB drives.

How to physically stop mac pro 2008's startup chime

Similar Messages

Maybe you are looking for