How to pick a HDD ?

Hi, I am looking for a hard disk for a 2005 Toshiba Satellite laptop which I bought in Singapore.
Model : Satellite M50-P330Satellite M50-P330
Part number: PSM51L-001001
I checked http://www.toshibadirect.com but could not find the precise model number.
Any analogous model ? What specs should i look for ? what is the max compatible capacity ?
further details of the laptop are here
http://pc.toshiba-asia.com/Laine/public/pressDetails.action?a=pressDetails&id=22367&currentTab=press...
i would appreciate any suggestions ..
ss
Maryland
Solved!
Go to Solution.

Any of the notebook drives that are not SATA and not cable-select should work just fine. I wouldn't exceed 120 GB because that computer's BIOS may not recognize 48-bit LBA. There are plenty of those.
Model : Satellite M50-P330Sate50-P330
Part number: PSM51L-001001
You have either the wrong model or wrong part number. They should be as follows.
Satellite M50-P330 (PSM50L-023003)
Satellite M50-P345 (PSM51L-001001)
See this Asian Satellite M50 spec sheet.
-Jerry

Similar Messages

How to pick the field "Origin Object" from SAP R/3

Hi all,
I need to implement a new field in a BEx Report : "Origin Object". This data is mix of "Cost Center" + "Project type", it's related to the PS module.
This field isn't available in my BW datawarehouse, so I need to figure out where and how to pick up it in R/3. I used the "data element" name : "CO_USPOB" and I've made a research through the "Where used list" tool but I didn't find any tables, only some structures. I've checked all of these structures but I didn't get any tracks...
Do you know another way to investigate? is there any doc. on the SAP.help about this data element?
Thanks in advance for your suggestions.
Jak

Hi,
If you know the transaction where the field can be seen. Then run the trace on that transaction and in the Trace list you will see all the tables accesed during the tranasaction execution. Then you can get the correct table from the table list
Thanks,
Nagarjuna

On a new imac how much of the HDD is already used with the OS,iLife,apps..

Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
cheers

Here's are some disk usage information from my 20" white C2D. The numbers
are running totals that include periodic software updates and some of my own
stuff -- but that would be less than 0.5 GB of the final total.
OS-X with "no optional packages" is a very usable system; it includes 'core'
applications such as Safari, iTunes, Quicktime. It does not include any of the
iLife apps or the iWork/MS_Office test-drive bloatwares.
The large increase in disk usage for a minimum Leopard system is partly due
to the inclusion of more apps in the 'core' OS package. Some things that were
optional in Tiger have become part of the "minimum" Leopard install.
The Xcode software development tools are a standard part of every OS-X
distribution, but since most customers have no use for them, they're not
included in the factory-installed disk image. If you don't plan to install
them, subtract 3.4 GB from the final tally.
Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
IMO, 250 GB is FAR more than you'll ever need for installable software plus
a sizeable collection of music/photos. OTOH, no amount of disk space will
ever be enough for an avid music/photo/video junkie, and everyone should
have an external backup drive. So, stick with the standard internal drive and
buy more external storage.
...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
Looby

How to pick consignment stock @ FIFO method when involved multiple vendors

Dear Guru s ,
I need some information/ logic on how to pick consignment stock @ FIFO method when involved multiple vendors (who supplies consignement goods) .
1)We have tried to determine the vendor @ FIFO method from the material document date & time with 101 K mvmt type
2) when we check MSEG table we are unable to get the current stock updates .For example Vendor A stock is showing 60 KG in MMBE , but MSEG is showing only 45 KG for the same vendor & storage location .
Can anyone provide me the logic / info on the same.
Thanks
Anil

Hi Anil
MMBE will show you total stock, your logic is correct , you can go for MSEG , but you need to add opening stock for that material for the period.
Suppose you are looking for report between 2nd august to 10 august , then you need to take opening stock on 2nd august and then add all goods receipt( 101 k) between 2nd to 10th and you will get correct stock on 10th ( same as MMBE)
Note : I am assuming that current date is 10th august. If you want to see stocks on particular date then go for MB5B.
Now as per your requirement , you can identify goods movement based on FIFO , follow same logic , pick time and date from MSEG for 101 k movement type.
Regards
Ravi.

How to pick the file which is created with current date

Hello All,
I have an FTP server where files are created with current date as PO_CONFIRM_20100701.txt.
Need to pick the file based on current date. How to pick the above file format using file sender adapter. i.e what file pattern can we use so that file will be picked only on today's date
Regards,
Sreenivas.

Hi Srinivas,
It depends upon the OS you are using. If unix you can see an example script here:
http://www.computing.net/answers/dos/batch-file-to-rename-files-by-date/5517.html
If windows an example here:
http://en.kioskea.net/forum/affich-87157-finding-and-using-file-date-in-batch-command
You may need to change slightly to fit your exact requirements. But this would make you to start. Else you can also google to get the script. Here is one link:
http://www.google.com/#hl=en&source=hp&q=scripttorenamefileshavingtodaysdate&aq=f&aqi=m1&aql=&oq=&gs_rfai=CRE9SwTMsTNjiDpzGhgTm65iFCwAAAKoEBU_QC2i-&fp=e0fa4b5da4f245a4
Regards,
---Satish

How to pick the fields of ABC table in Payslip

How to pick the fields of ABC table in Payslip, So i want to add the calender days(absent days) in my payslip

You can do it through PE51_CHECKTAB
Yogesh

S35dvd: How to remove the HDD?

Can anyone tell me how to remove a hard drive from a s35dvd please? I can not find a service manual anywhere and I need to remove the drive to try to remove a load of viruses that i can't remove with windows running or even in safe mode.
Thanks

Hi
Unfortunately this Toshiba unit it unknown to me and I dont have found any officials documents about the HDD replacing.
But as far as I know there should be only 2 possibilities how to remove the HDD.
1.) The HDD slot is placed at the bottom of the unit and you need to remove only the HDD cover.
Or
2.) The HDD is placed in the notebook. In this case you have to remover the keyboard and some covers to replace the HDD
Well, I can give you only this info. I think if you want to know the detailed instruction you should contact the Toshiba service partner because he has a more detailed informations about such cases.

How to pick invoice document from R/3.

Hi gurus,
How to pick Invoice Documents from R/3 to BI.
I am unable to find them in any of the datasources.
Anyone please explain me.
Regards,
V N.

Hi,
Thanks for the reply.
Normally the invoice documents which are there in the PO in Invoice receipts are billing documents ?
Please explain me in clear. I'm confused.
Regards,
V N.

How can I access HDD on Airport Extreme with iPad

How can I access HDD on Airport Extreme with iPad

Without third-party software I don't think you can. An iPad has no user-accessible interface to a file system. Just what is it you're trying to do?

How to pick document id for perticular case id from RMS

Hi,
Can anybody answer if you know "how to pick document id for perticular case id
from RMS".
please do the needful.
Thanks and REgards
-Sujatha

Alireza,
This is a really, really, really, really, really (really) really bad idea.
Using the max(id) + 1 trick:
1). WILL get you duplicates (think what happens when two people do this at roughly the same time.
2). Is horrible for scalability in general
3). If you use table locking to get around issue #1 is truly atrociously horrible for scalability.
[url http://forums.oracle.com/forums/thread.jspa?messageID=1901057]here is a previous discussion on this topic.
[url http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3379873654938]here is an AskTom article on this topic (note the title of that post is "Locking Problems" - should give you a hint as to whether this is a great idea or not).
Sorry for refusing to answer your question directly, but the best answer is here:
I do not want to use insert triggers or
sequence generators or stored procedures, yes, you do So i have to read the max id
and increment it by one from inside the application. no you don't
This is a really bad idea.
Best,
john

How to pick the changed name.

Hi all,
        can anyone help me out ...how to pick the changed name form the table ... if a name changed
        three times in month, how should I get it in report.???
        I have gone through the tables BUT000 & BUT020 but I haven't got thr trick.
        can you please help me.
Thanks & Regards,
Rajeev

Hi
You can refer to CDHDR, CDPOS tables as When you change the Object change document get created
You can put BP number in Object ID
You can view this change documents in FPP3
Extras-> Change History
Regards,
Prajakta
Edited by: Prajakta Shringarpure on May 18, 2009 12:55 PM

Satellite A200-10X: How to partitioning the HDD

Hi there guys!
I have a pro with my satellite A200-10X, it has only one HDD volume, and i want to make them two... and everytime i use the product recovery CD, it formats the HDD... but i do not know how to partition the HDD two get two volume spaces...
and whats worse is that when i keep on doing that over and over it eats the HDD free space... so how can i partition the HDD and recover the 200GB space the computer originally have?
i appreciate your help ..
thanx

Hello Sherif
If you use delivered recovery media you have follow options:
1. the whole HDD capacity can be used for partition C
2. the HDD capacity can be split and you can create two partitions
When you use both options Vista will create 1,4 GB partition but this partition will not be visible when you use OS.
If you want to have two partitions (C and D) start recovery procedure and after choosing the language use SETUP button on the right side. In the middle of the screen occurs small window and there you can set how much capacity should be reserved for partition C. when the recovery procedure is finished and Vista starts open Computer Management.
On the left side choose Disk Management. After doing this on the left side you will see partition marked as black. This is second partition but still not visible. Click there with right mouse button and choose option to create logical drive. Follow the setup procedure.
After few steps this partition will be set as logical drive and after formatting it will be visible in Vista Explorer.
If you have more questions please post again.
Bye

Urgent!!! How to pick a shape3D and give it a web link!!

Hi,
I'm new to java 3D.Can someone teach me how to pick a shape 3D and then give it a web link.
I'll be delighted if someone send me some sample source code.
This is urgent!! Please help!!
Thanks.
Chanax.

There is a two part answer to your question:
1. Detect when the object is picked
-Detect when a mouse click is generated. When this happens, cast a ray from the mouse position to the scene graph to see if it 'picks' your desired object,
- Make sure that pick reporting is enabled on ths shape you want picked, and on all nodes that are it's parent. Picking only works if all nodes from the base to the leaf are set to be pickable. More info on picking can be found here: http://java.sun.com/developer/onlineTraining/java3d/j3d_tutorial_ch4.pdf
2. Launch the web browser (This is not java3d related)
- Once you have confirmed that your shape was picked, you can open a web browser either using the System.exec() command (not very portable), or you could create a JTextPane and use Java's HTML features to display an HTML page directly. More on this at http://java.sun.com/docs/books/tutorial/uiswing/components/text.html

How to pick activity type from HR mini master during activity confirmation

Hi,
How to pick activity type from HR mini master during activity confirmation via BAPI "BAPI_NETWORK_CONF_ADD".
I have confirmed activity via bapi BAPI_NETWORK_CONF_ADD, and it is picking activity type from activity. but i wants from HR mini master. In BAPI i am passing Personal no.
Thanks in advance.

Hi,
Did you mention Activity type information in HR Master-315 InfoType (TimeSheet Default value).
then you can get the value.
Vemula

How to replace new HDD in CUCM or Unity Connection server ?

Dears All;
I am have a unity server HW Platform is 7825I5 and i am need to replace one of HDD's in slot 0 with new one,
my question is how do replacing the HDD (I have new one) and which is the method to ensuring the two HDD is mirroring and all data are replication the same .??
thanks

Hi
The attached public domain document should assist.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/trouble/7_1_2/tbsystem.html#wp1190377
Barry Hesk
Intrinsic Network Solutions

How to pick a HDD ?

Similar Messages

Maybe you are looking for