How to pick a quality PSU?

well? i need a new one this Stock PSU can take the heat. anytime i try to O/C now it just restarts and i know its not the ram or CPU. i just have too much hooked up.
so how do you pick a PSU that will produce what its posting on the box?

the best judge of a psu is size of 3.3v 5v and 12v max amps and there balance
its no good today having 50 or 60 amps 5v and low numbers on the others
but that still has its limitations
but you use the word quality
thats a different matter
and unless you get to look in side and do a million tests im afraid like most you have to rely on a makers reputation and the opinions of others
things like voltage ripple etc are why you pay 3x more for the good than the generic
the warrenty period is a good guide as well
names also ,ive found things with flash sounding names well lets just say most dont live up to them

Similar Messages

How to pick the field "Origin Object" from SAP R/3

Hi all,
I need to implement a new field in a BEx Report : "Origin Object". This data is mix of "Cost Center" + "Project type", it's related to the PS module.
This field isn't available in my BW datawarehouse, so I need to figure out where and how to pick up it in R/3. I used the "data element" name : "CO_USPOB" and I've made a research through the "Where used list" tool but I didn't find any tables, only some structures. I've checked all of these structures but I didn't get any tracks...
Do you know another way to investigate? is there any doc. on the SAP.help about this data element?
Thanks in advance for your suggestions.
Jak

Hi,
If you know the transaction where the field can be seen. Then run the trace on that transaction and in the Trace list you will see all the tables accesed during the tranasaction execution. Then you can get the correct table from the table list
Thanks,
Nagarjuna

How to export best quality gif animations in flash

how to export best quality gif animations in flash

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How can I improve quality of image when burning a movie to a DVD

How can I improve quality of image when burning a movie to a DVD?

What resolution are you using? If the DVD is to be playable on an ordinary DVD player, only ordinary TV resolution is supported. You need Blue ray for HD.
Geoff.

How to pick consignment stock @ FIFO method when involved multiple vendors

Dear Guru s ,
I need some information/ logic on how to pick consignment stock @ FIFO method when involved multiple vendors (who supplies consignement goods) .
1)We have tried to determine the vendor @ FIFO method from the material document date & time with 101 K mvmt type
2) when we check MSEG table we are unable to get the current stock updates .For example Vendor A stock is showing 60 KG in MMBE , but MSEG is showing only 45 KG for the same vendor & storage location .
Can anyone provide me the logic / info on the same.
Thanks
Anil

Hi Anil
MMBE will show you total stock, your logic is correct , you can go for MSEG , but you need to add opening stock for that material for the period.
Suppose you are looking for report between 2nd august to 10 august , then you need to take opening stock on 2nd august and then add all goods receipt( 101 k) between 2nd to 10th and you will get correct stock on 10th ( same as MMBE)
Note : I am assuming that current date is 10th august. If you want to see stocks on particular date then go for MB5B.
Now as per your requirement , you can identify goods movement based on FIFO , follow same logic , pick time and date from MSEG for 101 k movement type.
Regards
Ravi.

How to pick the file which is created with current date

Hello All,
I have an FTP server where files are created with current date as PO_CONFIRM_20100701.txt.
Need to pick the file based on current date. How to pick the above file format using file sender adapter. i.e what file pattern can we use so that file will be picked only on today's date
Regards,
Sreenivas.

Hi Srinivas,
It depends upon the OS you are using. If unix you can see an example script here:
http://www.computing.net/answers/dos/batch-file-to-rename-files-by-date/5517.html
If windows an example here:
http://en.kioskea.net/forum/affich-87157-finding-and-using-file-date-in-batch-command
You may need to change slightly to fit your exact requirements. But this would make you to start. Else you can also google to get the script. Here is one link:
http://www.google.com/#hl=en&source=hp&q=scripttorenamefileshavingtodaysdate&aq=f&aqi=m1&aql=&oq=&gs_rfai=CRE9SwTMsTNjiDpzGhgTm65iFCwAAAKoEBU_QC2i-&fp=e0fa4b5da4f245a4
Regards,
---Satish

How to pick the fields of ABC table in Payslip

How to pick the fields of ABC table in Payslip, So i want to add the calender days(absent days) in my payslip

You can do it through PE51_CHECKTAB
Yogesh

How to pick a good power supply?

I ordered my 875p Neo-FISR with an Aspire X-Dreamer case. The case is budget, but it does a decent job of cooling my system (cpu temps: 25c-40c). The only problem is, I'm using the 350w Turbolink PSU (better named POS) that came with the case.
My turbolink: +3.3V@24A;+5V@35A;+12V@12A
I have some money to spare so I'd like to buy a high quality PSU close to 500.
Here are a few of my options:
Enermax 460W EG465P-VE(FC):
+3.3V@35A;+5V@35A;-5V@1A;+12V@33A;-12V@1A;[email protected]
(Enermax sounds like a favorite on these forums, but it's a bit pricy...)
Fortron 530W FSP530-60GNA:
+3.3V@30/17A,+5V@44/24A,[email protected],+12V@16/28A,[email protected],+5VSB@2A
(Fortron won the Anandtech PSU Roundup so I thought I'd consider it.)
Antec 480W TRUE480BLUE:
+3.3V@30A;+5V@38A;[email protected]; +12V@22A;[email protected];+5VSB@2A
(Good PSU brand name)
Enermax $$$ > Antec $$$ >> Fortron $$$
The funny thing is, turbolink was ripped to shreds by Anandtech so I KNOW I have to replace my PSU. Any other suggestions are welcome.
Bonus points to anyone who can explain the volt/amp numbers and why they are important.

As Raven has posted, get the Enermax 460W and save yourself a lot of hassle in the future. I use it, I love it.
To "try" and explain voltages and such, well I'm not sure what you mean, but I will explain what I can.
+12V : The most important of them all since this one powers the processor, vid card, all fans and some other stuff I don't know of.
+5V : Dunno what this one is for. Maybe powering the mobo itself and the chipsets?
+3.3V: Powers your ram. Dunno what else it does.
Hope this helps.
Oh, and to everybody reading this, please correct me if I'm wrong. Thanks

How to reverse from quality and change the vendor account.

I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regards

hi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
   1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
   2. In the field for the movement type, enter
   3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
   4. Choose Enter to display the selection screen for the purchase order items.
   5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
   6. Save the goods receipt and exit the Materials Management component.
   7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
   8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
   9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

How are you checking quality in the upgrade process?

When upgrading your EBS, how are you managing quality?
Are you using solutions such as Quality Center and Quick Test Pro (from Mercury)? Are you using other tools?
Which test sets are you using to ensure that the upgrade had completed successfully?

Hi,
I am not very good at testing and nor I have used any testing tools.
But I think there are various post upgrade task which measures the quality of upgrade.
In my view upgrade quality can be decided on two factors
1.) Performance of new instance
2.) Is there any issue with Data ( Check for all tests and reports)
Pravin

How to pick invoice document from R/3.

Hi gurus,
How to pick Invoice Documents from R/3 to BI.
I am unable to find them in any of the datasources.
Anyone please explain me.
Regards,
V N.

Hi,
Thanks for the reply.
Normally the invoice documents which are there in the PO in Invoice receipts are billing documents ?
Please explain me in clear. I'm confused.
Regards,
V N.

How to pick document id for perticular case id from RMS

Hi,
Can anybody answer if you know "how to pick document id for perticular case id
from RMS".
please do the needful.
Thanks and REgards
-Sujatha

Alireza,
This is a really, really, really, really, really (really) really bad idea.
Using the max(id) + 1 trick:
1). WILL get you duplicates (think what happens when two people do this at roughly the same time.
2). Is horrible for scalability in general
3). If you use table locking to get around issue #1 is truly atrociously horrible for scalability.
[url http://forums.oracle.com/forums/thread.jspa?messageID=1901057]here is a previous discussion on this topic.
[url http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3379873654938]here is an AskTom article on this topic (note the title of that post is "Locking Problems" - should give you a hint as to whether this is a great idea or not).
Sorry for refusing to answer your question directly, but the best answer is here:
I do not want to use insert triggers or
sequence generators or stored procedures, yes, you do So i have to read the max id
and increment it by one from inside the application. no you don't
This is a really bad idea.
Best,
john

How to pick the changed name.

Hi all,
        can anyone help me out ...how to pick the changed name form the table ... if a name changed
        three times in month, how should I get it in report.???
        I have gone through the tables BUT000 & BUT020 but I haven't got thr trick.
        can you please help me.
Thanks & Regards,
Rajeev

Hi
You can refer to CDHDR, CDPOS tables as When you change the Object change document get created
You can put BP number in Object ID
You can view this change documents in FPP3
Extras-> Change History
Regards,
Prajakta
Edited by: Prajakta Shringarpure on May 18, 2009 12:55 PM

How to use std quality document types

Hi, Pls advise how to use std quality document types like Print list, Quality agreement, Technical delivery terms? i mean for what purpose those will be used?

hi
Quality Agreement;
Quality aggrement document type is used in Quality Info Record.If you maintain control key regarding Qaulity Aggrement you must maintain the Qaulity agg otherwise PO or GR wil be blocked.
Technical delivery:
Technical dele term are maintained in Material master-->additional data -->documents.
if you select the control key which has reference of Technical dele term you have to maintain this in MM otherwise PO or GR will be blocked.
Q01 Q-Agreement / MM-PUR
Q02 DelivTerms / MM-PUR
Both are customization in SPRO
Regards
Sujit

How to export height quality gif frm Flash CS3?

Hi,
When i export a .GIF movie from Flash CS3 , the movie quality is not good, here is some dot dots in the gif movie.
How to export height quality gif ? . Kindly explain pls as soon possible...
Thanks & Regards
Mohan

GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

How to pick a quality PSU?

Similar Messages

Maybe you are looking for