How to Pick differant price for same activity based on employee grade?

Hi,
My Requirement is -
1. We are using Machine -1 for manufacturing purpose. In this machine, There 3 employees who are authorized to work... (Eg. Employee A -Employee B -Employee C)
2. We have an Activity type for Machine hour. The price given in KP26 is 10$ per hour and assigned it in Work Center.
3. But Employee A hourly price is 12% & Employee B hourly price is 10$ -Employee C hourly price is 8$.
4. Now with the current set up, system is taking 10$ for any of the above employee which is not correct.
Requirement is - When Employee A works on this machine, system shoule take 12$ per hour and If employee B woks on this machine, system should take 10$ per hours and For Employee C, system should pick 8$ per hour. How to get different activity rate when using different employee?
Kindly help me how can i configure for this requirement. Please give me some inputs..
Thanks
F4N

hi..
You can map in the following manner :
             You creat One WC and define three operation against each Employee and define three activity and plan your rate in KP26 against each activity
                       WORK CENTRE     Machning
                         Activity
OPRN -1(Emp-A)     A-1
OPRN-2(Emp-B)     A-2
OPRN-3(Emp-C)     A-3
     So from operation One system will take hr * rate to calculate cost of oprn of employee and so on....
Please test and write back for any help.
kkumar

Similar Messages

How to make Different Price for same product in one Sale Order

How can i customizing my system?
I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
Someone have any suggestions?

Hi
you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
- you'll need to create a new ítem category copied from the one you´re using and do all assignments
- add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
http://scn.sap.com/thread/1693234
- Adjust your pricing sequence as per new table
- Maintain specific prices in new table for materials with this new ítem category
Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
Regards,
JM

How to maintain different prices for same item in different organizations

hi all,
We have noticed that the list price of an item at Item Validation Org level is getting defaulted when creating requisitions. We want to maintain different prices for the item for different organizations, so that the prices will be properly defaulted to requsitions depending on supplier and receiving org.
We found one way of doing this. Using contract purchase agreement and Advanced Pricing price lists. Can anyone please let us know if there is any other way of achieving this??
Also, I have a question regarding Advanced pricing Price Lists. I performed following steps.
1.Set the QP: Licensed for Product profile to Purchasing
2.Create and approve a contract purchase agreement in Oracle Purchasing
3.Define Price Lists and Price List Lines (optional)
4.Define sourcing rules and ASLs to automatically default source information onto requisition lines. Associate Contract to ASL.
5. This will enable Oracle Advanced Pricing integration in the following Oracle Purchasing functionality:
Requisition pricing
Purchase order pricing
But when I create requisitions, the price from price list is not getting defaulted automatically. In requisitions form, if I go to source tab and select source as a Contract Purchase Agreement, then the price from price lists is getting defaulted. Is there any way where the source for the requisition can be automatically defaulted to Contract and the price can be picked from price lists??

Can oyu not make it an organization level item and specify the proce there instead of keeping it a master level item?
Regards,
Utsav.

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

Need help:How to realize different prices for different quantity in CCM2.0?

Hello,
I'm in process of establishing catalog with CCM2.0 for our company. There is a user request to realize different prices for same item when user buying different quantity. Can you help me how I can realize this?
Thanks a lot,
Elly

Hi,
Is there somebody can help me? I really need this to be addressed ASAP...
Thanks a lot!
Elly

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How to maintain different price for different grades

Dear sd experts
plz let me know one thing.. i have one material but we have divided 4 grades like AA,BB,CC,DD
now here material is same sales org , distribution channel is also same
so i want to maintain different price for all like 500,400,300,200
so is it possible in OMWC T.code
i know variant configuration is helpful but that concept is different ,, i have checked this link http://scn.sap.com/message/14124162#14124162
but this is differnt
so plz experts any comment on this ... thanks a lot

Hi Venu,
while creating the material you can enter the valuation type as below
and in the Material master under accounting view 1, click on the organizationa level where youc an see your valuation type C1
In the same way you can maintain the prce for C2 and click on the organizational level under the Accounting 1 view
for the same material and same plant with different valuation types you can see different price
hope you find thd difference in price between two valuation types
revert if you need more details.
regards,
santosh

Maintain diffrent prices for same material

How to maintain different prices for same material (assume that the price of the the material is varying frequently that to with high margin)
But my req is need to maintain N values for same material .Is it possible??
For ex,
3 Jul Purchasing 20 Pc with 20 INR
5 Jul Purchasing 10 Pc with 10 InR
7 jul Purchasing 20 pc with 2 Inr .... like that price is changing freq. But i dont want to use MAP .Whatever price i purchased will be used for cost calculation.Any suggestion??
Message was edited by:
velmurugan s

Hi,
If your Purchase price changes frequently and you want your MAP or STD price to match the purchase price then you will have to write a simple ABAP that will read the last price paid for each item and automatically post an MR21 to change the MAP or STD price to that price.
I have seen this used in other implementations and it is the only real way to get the MAP or STD price to relate to the last price paid.
I would question why you need to do this though as the two "prices" are designed to be different and there is no accounting reason why they should always be hkept in line.
Steve B

How to arrive same day two difference prices for same material/customer

how to arrive same day two difference prices for same material/customer.pls give the solution
thanks in advance
Aravinthan.K

Hi
This is possible through some careful customization
In your condition table you need to bring the field PRICE LIST
That is customer/ Material/ Price list
That is customer ABCD / Material X / Price list 01---Price is Rs 10
That is customer ABCD / Material X / Price list 02---Price is Rs 20
The condition records to be maintained like this
So same material and same customer with price list 01 price is Rs 10 and with price list 02 price is Rs 20
Now in sales order you will find price list field in item details SALES B tab
Through incompletion log you can make this field as an mandatory field
Now in sales order same material and same customer according to the price lists different price is picked
In img-sd-basic functions-Maintain Price-Relevant Master Data Fields--here you can define different price lists
Regards
Raja

How do we maintain diff price for same material diff customer

Hi Experts,
Wish you all a very happy new year 2010.
Here is the question which I have for you..very elementary.
I need to maintain different price for different customer for same material in the same sales area, for the same plant
Can anyone let me know how to do it !!
There are more than 10k customers for whom different price needs to be maintained.
P.S: I tried to search in the forum a lot about this, but was not able to find one correct answer.
Thanks and Regards
Rohit Dujari

Hello,
You can take help of ABAPer to create a batch input session or you may use LSMW . You can split these 10000 customers into some practicle numbers (group) depending on your policy.
You may also explore rules for creating condition records which frankly i am not awareyou get a select rule tab on bottom side of screen when you go to vk11/vk12
Regards
Vivek

Purchasing info records with different prices for different packaging

Hi,
hope, someone can help me.
We have different prices for different kind of packaging, but all the material is bought in the same unit, i.e. kg.
Let's say, usually you buy x kg in a drum, but sometimes you buy y (or x) kg in a bottle or in a bag.
We won't allow variable order units. Even if we would, it's not helpful, because we always order kg.
So the price depends on a criterion - I don't know, which to take. And we want to maintain the different prices in the info records.
Is there a solution?

Hi.
I went through the history of the problem.It seems that your base unit of measure is KG.Also you have mentined that same material is used in various plants.
You need to activate the variable ordering unit 2 in material master. This is present in the materila master Purchasing tab.Also note that this data is maintained at plant level. This will not have any impact on the materials which are presnt in the other plants.
After activating variable order unit in materal master. You need maintains the conversion factors from Order units to Base UOM.(Eg 1 KG = 1 KG, 1BOX = 10 KG etc)
Create inforecord for the material and maintain price in Base unit of measure.
In PO enter the order unit as BOX system will automatically calculate the price of BOX based on the conversion factors which are maintained in the material master.
I belive this is the simple and best solution for your requirement..
If you have any suggestions please let me know
Cheers
Umakanth

Separate Moving Average prices for Same Material

HI All,
My client wants to maintain moving average price separately by shipment wise. In this scenario same material for same plant might have different moving average prices for each shipment. Is it possible with standard SAP system or how is it map in to System?
Thank you & Best Regards
Sameera

Duplicate thread already same question raised refer below link,
[Re: Separate Moving Average prices for Same Material]

Different View for same document library on a Wiki Page

Hi,
I am developing a Provided hosted app which have a functionality to create a document library with two Views. Also we need to show this document library in a wiki page with two different views.
I am using CSOM (C#). I am able to create the document library and the two views programmatically. But when I add the document library in the wiki page the default view (All Documents) is shown for both the web parts. There is an hidden view created with
the WebPartDefinition from the xml provided through code.
Through CSOM we are able make a View as default with the link below.
http://sharepoint.stackexchange.com/questions/90433/add-document-library-xsltlistviewwebpart-using-csom-or-web-services
In my case both the webparts will get the same view, where I need different view for same document library in a wiki page.
Also I tried to update the web parts with the following code.
string viewString = @"<View Name='{0}' MobileView='TRUE' Type='HTML' Url='/SitePages/Home.aspx' Level='1' BaseViewID='1' ContentTypeID='0x' ImageUrl='/_layouts/15/images/dlicon.png?rev=23' >
<Query><Where><Eq><FieldRef Name='KeyDocument'/><Value Type='Boolean'>1</Value></Eq></Where></Query>
<ViewFields><FieldRef Name='FileLeafRef'/><FieldRef Name='DocumentOwner'/><FieldRef Name='Modified'/>
<FieldRef Name='_UIVersionString'/><FieldRef Name='Editor'/></ViewFields>
<RowLimit Paged='TRUE'>30</RowLimit><JSLink>clienttemplates.js</JSLink><XslLink Default='TRUE'>main.xsl</XslLink>
<Toolbar Type='Standard'/></View>";
WebPartDefinition wpd = wpfound.FirstOrDefault();
string formattedstring = String.Format(viewString, wpd.Id);
wpd.WebPart.Properties["XmlDefinition"] = formattedstring;
wpd.SaveWebPartChanges();
web.Context.ExecuteQuery();
I created two views (viewString) as shown above.
The above code did not throw error, but it did not update the web part.
Please advise how to move forward.

Hi Samir,
When we click outside of the list view webpart on a webpart page (or allitems.aspx page) with containing multiple webparts, the list view webpart will lose the focus, and the selected items will be deselected, this is by design.
You can look at the following article with using the approach/workaround of Javascript to prevent the specified list view webpart from losing focus.
http://sharepoint.stackexchange.com/questions/44360/list-view-loses-focus-when-additional-webpart-added-to-page
//Set focus on our list web part
var webPart = document.getElementById('WebPartWPQ1');
WpClick({target: webPart});
//Prevent it from losing focus
SP.Ribbon.WebPartComponent.$3_1.deselectWebPartAndZone = function() { };
Thanks
Daniel Yang
TechNet Community Support

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

How to Pick differant price for same activity based on employee grade?

Similar Messages

Maybe you are looking for