How to pick up installment plan in alternate bill (invoice)

Hi,
For a certain rate category (product), we are moving from monthly billing cycle to fortnightly billing cycle.
Installment plans are already created for customers such that installment is due on 1st day of every month.
As per contract terms, we can not break down installments further and should be charged only once in a month.
E.g. installment due dates are 01.04.2011, 01.05.2011....
Earlier this was charged once in a month, as billing cycle was monthly.
Now when we move from monthly cycle to fortnightly cycle, installment is being picked up in each fortnight (though due date is not reached).
E.g.
For bill period 01.04.2011-15.04.2011, billing/invoicing is done on 15.04.2011, one installment is picked up corresponding to installment due date 01.04.2011. This is okay.
For bill period 16.04.2011-30.04.2011, billing/invoicing is done on 30.04.2011, again new installment is picked up (which is due on 01.05.2011).
Here we want to avoid installment being charged in second fortnight which is not yet due. This should be picked up in subsequent cycle.
Please advise how to handle this, is there any event etc. where we can make some changes?
Thanks,
Sachin Joshi
Edited by: joshisachinr on Apr 19, 2011 1:52 PM

Sachin:
Look at event R411 for solution to your issue. You can adjust line items pulled in for due date synchronization. You might also reconsider the restriction of the IP line items since the items are no longer requested on same cycle as billing.
regards,
bill.

Similar Messages

Create an installment plan for an existing invoice

Hi gurus,
We have invoiced a customer and now want to make the invoice payable by instalments, is there any way this can be done using the existing invoice?
It would not be appropriate to creit the invoice and recreate it as a periodic contract.
Thanks
Ciara

Hi,
You may use the SAP standard periodic or milestone billing functionalty as suite to your requirments or need.
with regards
Vivek.

How to migrate installment plan with open items

Hi all,
I am trying to figure out how to migrate an installment plan, when my legacy system does not tie my open items directly to my installment plans. And the amounts in my open items table may not add up to the exact amount of the installment plan.
So for a simple example, I have $10 left on an installment plan that was created 6 months ago.
Since the creation of the plan obviously more charges and payments have been posted to this account, clearing previously open items and creating new ones.
Presently, I have only 2 open items remaining, one for $6 and one for $7.
So I have "enough" open items ($13 worth) to post the $10 installment plan, but not an exact match.
The way I read the migration documentation on this, I thought I could use a OPUPZ field (Subitem for a Partial Clearing in Document) to signify that I want to partially clear that $7 charge. Apparently I misinterpreted that.
So my question is, is there a way to migrate this installment plan with this set of open items?
Or is my only option to alter the payment plan to the open items, and say that there is $13 remaining on the plan?
Thanks.

C N,
The principal Idea is to migrate either
- the original amounts, the installment plan and last the latest payments (you migrate payment history)
- or to migrate the still open amount as one or more open items and subsequently an installment based on that amount.
Kind regards,
Fritz

Installment Plan Migration failing (Emigall)

Hi all,
I'm trying to migrate installment plan data using the INSTPLAN object. I can upload successfully as long as I'm only migrating ONE payment. The problem is when I try to migrate multiple payments. The way I read the docs, I should just be able to send multiple IPDATA rows with the payment amounts and due dates, under one IPKEY row.
I've pared my data back to just sending as follows:
IPKEY row with current dates
IPDATA row with due date 20090129, amount due 14
IPDATA row with due date 20090228, amount due 14.56
IPOPKY row with a Document id that relates to a single open item of 28.56.
I have verified in FPL9 that my open item is indeed that amount 28.56. But the error that I get is:
"Sum total Inst. Plan is not equal to the original receivables"
So this makes me suspicious that I've done something wrong in the IPDATA rows - maybe it's recognizing only one of them?
Can anyone shed some light on this subject for me?
Thanks,
C N

One more thing I can't figure out, is how to load an installment plan where there is not an EXACT match of open items to the installment plan amount, so I need to partially clear one open item.
I've played around with using 000 and 001 for OPUPZ as the documentation indicates, but still I cannot get that scenario uploaded
Anyone know how to do this?
Thanks

Installment plan - Plans are scheduled and not paid , extend to other cust.

Hi Masters,
Please clarify and suggest on Installment plan.
We have query in Auto industry , where the customer buys the vehicle on installment basis ,and the installment plan is for 2 years . The customer pays regularly for 1 year and after an year , the customer is not paying the installment.
There are two sceanarios .
1.Installments not paid , how to close the instalment plan and how the payment procedure is closed
2.if some other cusotmer want to buy the same used vehicle how can the instalment plan can be extended the other customer.
Thanks in Advance,
Awaiting for your inputs.
Rakesh

You are addressing issues that are not for this forum. This is a user to user support forum. Your comments are not being directed to anyone at RIM.
Even if this was a direct to RIM forum what your carrier charges for a data plan and what data plans are available is beyond RIMs control. Your issue is with your carrier in particular and Indian carriers in general.
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

Bought a tablet on device installment plan, can no longer bill equipment to account

I recently purchased an iPad mini and bought it on the device installment plan. Then found out that I can no longer bill equipment purchases to my account. I have a spotless payment history. I was planning on buying the iPhone 5 this week and billing it to the account so I could pay for it in January on the December bill (which would be due Jan 17 as my billing cycle closes on the 22nd). I billed an OtterBox (which I got for my iPhone 5, which I am keeping) and I billed an upgraded MiFi device (which I cancelled the online order and VZW put in a ticket to FedEx to have the shipment intercepted and returned to VZW). According to the tracking, VZW received the shipment on Nov 23rd) but VZW says that it has not been scanned in yet as of Nov 27th. I am trying to dispute the charge but have been told that it would be credited when it is scanned in. I don't know what barcode is scanned but FedEX assigned a new tracking number to return the shipment and VZW says that is unusual so I am hoping that they are not relying on the tracking barcode.
I am wondering if the device installment plan disqualifies a customer for billing equipment purchases to the account.

Iowacowboy, thanks for posting. An account cannot exceed $1000 combined bill to account and Device Installment Plan balance. (Bill to account maximum is $400 per account, per month for consumer lines). I hope this helps.^SP

ISU-Installment Plan item in Invoice

Hi,
We are rolling out installment plan and were able to create the standard installment plan.
The present Invoice has 3 heads i.e. 1)Current month amount, 2) Outstanding and Net Amount Due (Total of 1& 2)
The business requirement is to add the installment plan items into this, i.e. 1) Current month amount, 2) Outstanding, 3) Installment plan item and Net Amount Due (Total of 1,2& 3)
The dates of installment plan (say 3rd Aug) and Invoice due date (Say 30th Aug) will always be varied.
Is there any way to add the installment plan item into the Net Amount Due
Additional info:
-Invoicing is always monthly
-There is no Charges/interest/taxes involved
-Its ok if the customer pays on 30th for Installment item due on 3rd (again since Charges/interest/taxes are not involved)
-The customer can pay only the Invoice Net amount due (no option to edit this amount when he pays) which is driving this requirement.
Thanks in Advance,
John

Hello,
Installment plans are treated as short plans where in which the overdue outstanding amount is divided into 'N of items thus reducing the burden of the customer. Say if you have £100 Inv. You have agreed to collect the amount in 2 installments. You create Inst plan for £50 each using FPR1.
Now if the customer is on Direct Debit, the above amount would be collected when you run the Payment run using FPY1, Generate DME file and send to bank.
Hope this is clear
Rgds
Rajendra
Points!

I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
or
Adobe contact information - http://helpx.adobe.com/contact.html

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
Thanks,
Adrian
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? 20 Year Verizon Client

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? Any other advise in this matter would be greatly appreciated.
20 Year Plus Verizon Client

The only "unlimited" plan I can think of where this would not apply is the old Connect plan for multimedia/basic phones. That unlimited data, on devices such as the LG Voyager, EnvTouch, and other "multimedia" devices is not the same.
If you currently have an individual $29.99 unlimited data plan with a 3G Smartphone, then you can buy a BBQ10 retail and activate it with the same data plan and keep the unlimited.

How can i check Rapid planning version installed in R12 E-Business suite .

How can i check Rapid planning version installed in R12 E-Business suite .
Please let me know.

Hi;
Please check below doc:
Information Center: Rapid Planning [ID 1391411.2]
Information Center: Rapid Planning Patch and Maintenance [ID 1395694.2]
Regard
Helios

How about "installment-plan" SAP Educaton in the newer SAP technologies ?

OK - so SAP wants more customers doing the new SAP advanced technologies.
If that's the case, SAP should want more folks out there who are qualified in these advanced technologies - BI, XI, WebD, etc.
So, why not offer SAP Education on the installment plan with a 5% interest-on-balance fee?
Is the idea too simple?

David,
Your idea is probably correct, just it should not be SAP offering the loans. Instead SAP could partner with one or many of its banking customers to offer such type of "tuition assistance". SAP and the banking customer could decide how to compensate each other for the service.
This assume that SAP would want to try to market its courses to a larger audience. I will say one offering that definitely would get more exposure is making the full training catalog of course available through the virtual training offering. I'm still waiting for the CRM marketing class to be offered in such fashion.
The only drawback is that the classes still cost the almost the same regardless of delivery method.
Take care,
Stephen

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

Error while Installment Plan creation

Dear friends ,
When i am saving the installment plan i am getting this error can anyone please let me know how to rectify this error
Internal error: Incorrect use of a function module
Function module FKK_TAX_EXEMPT_KEY_DETERMINE was called with incomplete parameter specifications. One of the following entries is missing in transfer structure I_FKKTAXEXC:
Tax code
Company code

Hi,
You check the a/c determination for Inst Plan in EK01 & EK02.
I beleive that the G/L a/c is incorrectly assigned.
Regards,
T

Installing iTunes to alternate internal hard drive?

Cliff Notes Version:
Can someone help me re-install iTunes on an alternate internal drive (a drive other than C)?
I have just removed iTunes and all components from my PC and now need to reinstall.
You can read the details below but ultimately I want to install all things Apple on my E drive as opposed to my C drive.
If you do read the details, I chose option 3 at the bottom as opposed to trying to fix existing errors or files.
I tried moving both the library file and the database file as instructed but you can see the error messages below.
What I am looking to do is do the original install on the E drive to avoid moving anything as that did not work the last time.
I am not looking to save any files or playlists...I can repopulate those fairly easily. I just want this set up right out of the gate.
Any advice greatly appreciated.
Original Posting on Another Board:
I originally tried to move itunes the library & database and got the these errors
- iTunes Library cannot be saved . There is not enough memory
- the iPhone Doug's iPhone cannot be synced. An unknown error has occured (-23)
My System:
Windows 7 64 bit
C drive = 96Gb SSD that is used for program files only. I want to move both the library and database (ie all Apple software) off of here.
iTunes 10.7.0.21
System has 8Tb of memory over several hard drives (music, photos, etc...). iTunes will only manage the music part of my media
Of these drives, about 1.5 Tb is music. Of that 1Tb is a copy (FLAC) of all my CD's. The other 1/2 Tb is digital music I have downloaded.
E: = 1 Tb drive for digital music (mp3 files) It is less than 20% full
H: = 1 Tb drive containing a FLAC copy of my CD collection
Bonjour was/is disabled as it had been causing other issues with the system (edit - is has now been uninstalled with the remainder of the Apple software)
I wanted to move itunes (both the library and database files) is to keep the SSD at a lower capacity. Obviously the library files alone would have over-ran the drive, but I am not sure how large the database file gets, so to be safe I moved it too. Here are the steps I took:
First I moved the library (at the point it was moved it only had 3 mps cd's in it).
1. Edit>Pref>Advanced
2. Checked only the Keep iTunes Media Folder Organized (I do not want a second copy of all my music in the library.
3. Clicked CHANGE button and chose E:/Music folder (the same drive I have my digital files on and only 20% full.
4. File>Library>Organize Library>Consolidate Files>OK
I then moved the iTunes Database:
1. Shut down iTunes
2. Copied the iTunes folder to the new location (also E:/Music)
3. Restarted iTunes while holding the shift key and chose the library.
Finally, I moved in all the digital files from the E drive (File>add Folder to Library). This appeared to work and all my MP3 files appeared in iTunes.
The problem started when I attempted to sync my iPhone. I should note that my music library has been recently rebuilt as I lost everything on a previous drive (music, iTunes, etc...). So, when I attempted to sync the phone for the first time since re-installing/rebuilding everything, I got an error message: this iPhone is already synced to another Library. And that if I continued with the sync, I would lose all the files on the iPhone. I was ok with that as I had the files in the new/rebuilt iTunes. Also checked was the button to let me check the files I wanted to sync as iTunes is much larger in size than my phone. At that point I tried to select several files to sync with the phone and got the error messages listed at the top.
So, I have a few questions:
1. Can anyone tell me what the error messages mean? The first about not having enough size makes no sense. The drive that iTunes was moved to was only 20% full at the time on a 1Tb drive. Even if I had chosen to keep a copy of the music in iTunes (which I did not) it would have still only been 40% full including the iTunes Library file. I have no idea why I got this message.
2. Just how large will the iTunes database get. I know this is subject to how much it "manages" but assuming 3-4 Tb of music, photos, etc... how large will this file grow? On my SSD Windows is taking up more than 25% of the drive. I could leave this on the SSD provided it will remain fairly small and just move the library but thought it would be just as easier to move everything.
3. Would I be better off completely installing iTunes and re-installing it on the alternate E drive as opposed to the default C (SSD) drive? This is what I have choosen to do, so far have uninstalled iTunes and now have questions regarding re-installing on an alternate drive (see very top)
Any help is greatly appreciated!

turingtest2 - thanks for the info. Have some questions:
1. Already used 3rd party software to backup all the music from my phone (about 99% ripped from cd or purchased elsewhere than iTunes. So, I really need to just get any data (contacts, etc...) and the apps purchased backed up. I assume doing steps 3-6 from the Recover Your iTunes Library link you sent will do this?
2. From what you sent, just my database file will be about 20Mb on a 96Mb drive. That is precisely why I want to move the database as well as the library off the C drive.
3. I currently have no library as I deleted all things Apple earlier today. What I do have is 2 drives that contain music, an E drive for music downloaded and an H drive for music ripped from CD's. So I don't currently have a library to know if it's working. The process you describe is a split process with the library database on one drive and the media folder on another drive. In my case I do want to "move" the entire iTunes folder to another drive but an internal drive. And as opposed to moving the files, is there a way to simply install them that way when downloading a new copy of iTunes (rather than installing then moving the files)?
Also, in the Make a Split Library Portable document you linked, it sawy that any media files outside of the media folder will need to be consolidated. Since I am starting from scratch, I assume there will be no files there yet to consloidate. Or would this be the files I backed up and restored (apps, data,etc...) in step 2?
As for manipulations you mention, are any of these necessary in my case if I am not moving a library but rather creating a new library on a different drive? I assume once the
Or, in short, how can I simply install (or move) the entire iTunes folder to my E drive and then compile the library with music? And if you don't mind, could you be pretty detailed on moving/installing both the library database and the media folder on the new drive? I got confused about renaming, root drives, etc...
Or am I overthinking this and it is as simple as downloading iTunes (to the C drive)> copying the iTunes Media folder (and all contents)>pasting that folder in my E drive> going back and deleting the original iTunes Media folder in the C drive> then re-opening iTunes +shift key to point to the new iTunes Media folder on the E drive?
Thanks again

How to pick up installment plan in alternate bill (invoice)

Similar Messages

Maybe you are looking for