How to pixalet more than one person on the same piece of footage?

Trying to pixalet more than one person in a piece of video footage with Final Cut Pro X. Having problems trying to do more than one person.

rebelrider1 wrote:
Trying to pixalet more than one person…
you can apply the Censor Effect, as most other effects, more than once:

Similar Messages

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

Hiring more than one person to the same position.....

Hello, experts,
Am surprised to see that I cud hire another person for the same position which was already occupied 100%. I understand that a position may be filled by more than one person, totalin to 100%. In this case, though one person occupies the position to 100% full, am still able to hire. Could anybody help me with this as to why is it so.
thank you,
Sarita.

Hello sarita,
The problem is coming from the setting of the relationship A008 in table V_T777ZVK, which is set to 2 instead of 3.It is not recommanded to change the standard setting as it can cause issues, which can be critical, refer to note 396103 for mor information on the consequences.
If you want to have warning message in PA40 when assigning position to make sure only one person is assign to one position, you can do the following:
If the 100 % check is set to 'W' in T77VA you get a warning message
telling you that the A008 relationships of P xxxxxxxx exceed working
hours by xxx % Message no. 5A 321
You should set this flag to 'W' for example when there are two persons who should be assigned to the same position, i. e. when they are working part time.
If the 100 % check is set to 'E' in T77VA you will get an error message telling you that A008 relationships of S xxxxxxxx exceed 100 % by 100.00 % Message no. 5A 323
To get this error message please make sure, that you have maintained both entries in table T77VA (relationship characters):
Best Regards,
Deepak.

How to display more than one data on the same page?

Hello all,
I have a question that is if I want to choose more one data on the same page and the data is selected from the same column.
I.E I want to tick more than one boxes in the page but the data is selected from the same column.

Select all the item to burn... right click...
Or
Place all items into a folder and burn the folder to the disc.
Or
Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

How to burn more than one file on the same dvd?

I would like to burn more than one file in to the same dvd. It seems to me that using Finder I can burn only a file. There is some alternative command? Thank's

Select all the item to burn... right click...
Or
Place all items into a folder and burn the folder to the disc.
Or
Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

How to send more than one command at the same time to write buffer in VISA READ?

Hi,
I'm using the LABVIEW->serial.VI with a small modification for my serial communication with a shutter control unit.At present,I can send one command CTSO1 to the write buffer.My instrument can read upto 5 commands.I want to send CTSO1 and CTSO2 simulatenouly so that i could open two shutters simulatenously.Note that commands have carraige return constants as terminatting characters.I'm enclsoing the VI which works for one command.
Any help in this regard is greatly appreciated!
Regards,
Rajesh
Attachments:
VI_SHUTTER_JUNE30.vi ‏50 KB

You cannot do two different simultaneous VISA writes over a serial bus. There is a single rx line on the pc's com port and a single rx line on the instrument. You only hope is if the instrument allows you to chain commands and the reception of the carriage return triggers the instrument to implement both at the same time. Maybe you can send CTS01 and CTS02 separated by a space or comma. The manual should tell you if that's possible or maybe you need to ask the manufacturer.

How to create more than one VIP use the same IP address and different port(e.g. 80 and 443)

Hi,
I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port.
for example:   VIP address 1.1.1.123   use port 80 for HTTP   and port 443 for HTTPS
However,
the following problems encountered, when I create the second VIP.
PS C:\Windows\system32> New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -LoadBalancerVIPTemplate $VIPTemplate1 -LoadBalancerProtocol $Protocol1 -LoadBalancerHealthMonitor $HM1
New-SCLoadBalancerVIP : A virtual IP (VIP) address with the specified name (vip11) or
address (1.1.1.123) already exists on the load balancer (xxx). (Error ID: 13691)
Specify a different name or IP address and try again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq
"{b41a77eb-ae0b-490a-8948-662a529b1d8c}"})
At line:1 char:1
+ New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -Lo ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ReadError: (:) [New-SCLoadBalancerVIP], CarmineException
    + FullyQualifiedErrorId : 13691,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.Ne
   wSCLoadBalancerVIPCmdlet
PS C:\Windows\system32>
any suggestions ?
Thank you in advance !

I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.

How can you text more than one person at the same time?

Is it possible to text multiple people at the same time?

Nope - not at the present time anyway.

How to prevent more than one login for the same username

I am trying to create a centralized login/logout for my J2EE application, i.e application level security in order to keep track of the users that login and logout to/from application. I need that in order to know which users have logged out before their sessions expire. Is there an easier way (possibly on the server level) to accomplish this.

How is your centralized authentication service hooked up, through a custom realm?
Unfortunately there is no notification mechanism of logout events currently. Partly due to the fact that while the a logout is sometimes explicit (session invalidated or expired) it is also at times implicit (if there is no session, the logged in user silently disappears at the end of a request).
P.S. If you're only looking to keep track of login and access events (and not modify the behavior), the audit logging provides this information directly.

How to emai more than one person

hi, can someone please post some code on how to send more than one person the same email, i tried what's below but get an error:
// Send message out as email via JavaMail
// Emails for group 1
String namesOne[] = {"[email protected], [email protected]"};
// Vector to store names
Vector namesInGroup = new Vector();
// Add names to vector
for(int i=0; i<namesOne.length; i++) {
     namesInGroup.add(namesOne);
Properties props = new Properties();
props.put("mail.smtp.host", "???");
Session s = Session.getInstance(props);
MimeMessage message = new MimeMessage(s);
InternetAddress from = new InternetAddress("[email protected]");
message.setFrom(from);
InternetAddress[] to = new InternetAddress[namesInGroup.size()];
String emailOfPerson;
for(int i=0; i<namesInGroup.size(); i++) {
     emailOfPerson = (String)namesInGroup.elementAt(i);
     to[i] = new InternetAddress(emailOfPerson);
message.setRecipients(Message.RecipientType.CC, to);
message.setSubject(subjectOfMessage);
String text = mailText.toString();
MimeMultipart mm = new MimeMultipart();
MimeBodyPart mbp = new MimeBodyPart();
mbp.setContent(text,"text/html");
mm.addBodyPart(mbp);
message.setContent(mm);
Transport.send(message);
// End of JavaMail code
the host is fine, ???, just didn't want to write it there, i've been able to email one person but can't get this to work, i get the following error:
[05/Sep/2002:15:27:03] failure (10730): Internal error: exception thrown from the servlet service function (uri=/WriteAndEmail.jsp): javax.servlet.ServletException: Illegal address, stack: javax.servlet.ServletException: Illegal address
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:384)
at WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:291)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:533)
, root cause: javax.mail.internet.AddressException: Illegal address in string ``[email protected], [email protected]''
at javax.mail.internet.InternetAddress.<init>(InternetAddress.java:66)
at WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:243)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:533)
both emails are valid.
Thank you.

soni29 wrote:
hi, can someone please post some code on how to send
more than one person the same email, i tried what's
below but get an error:
// Send message out as email via JavaMail
// Emails for group 1
String namesOne[] = {"[email protected],
[email protected]"};
// Vector to store names
Vector namesInGroup = new Vector();
// Add names to vector
for(int i=0; i<namesOne.length; i++) {
     namesInGroup.addElement(namesOne);
Properties props = new Properties();
props.put("mail.smtp.host", "???");
Session s = Session.getInstance(props);
MimeMessage message = new MimeMessage(s);
InternetAddress from = new
InternetAddress("[email protected]");
message.setFrom(from);
InternetAddress[] to = new
InternetAddress[namesInGroup.size()];
String emailOfPerson;
for(int i=0; i<namesInGroup.size(); i++) {
     emailOfPerson = (String)namesInGroup.elementAt(i);
     to[i] = new InternetAddress(emailOfPerson);
message.setRecipients(Message.RecipientType.CC, to);
message.setSubject(subjectOfMessage);
String text = mailText.toString();
MimeMultipart mm = new MimeMultipart();
MimeBodyPart mbp = new MimeBodyPart();
mbp.setContent(text,"text/html");
mm.addBodyPart(mbp);
message.setContent(mm);
Transport.send(message);
// End of JavaMail code
the host is fine, ???, just didn't want to write it
there, i've been able to email one person but can't
get this to work, i get the following error:
[05/Sep/2002:15:27:03] failure (10730): Internal
error: exception thrown from the servlet service
function (uri=/WriteAndEmail.jsp):
javax.servlet.ServletException: Illegal address,
stack: javax.servlet.ServletException: Illegal
address
at
org.apache.jasper.runtime.PageContextImpl.handlePageExc
ption(PageContextImpl.java:384)
at
WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:
91)
at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBa
e.java:126)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java
826)
at
com.netscape.server.http.servlet.NSServletRunner.Servic
(NSServletRunner.java:533)
, root cause: javax.mail.internet.AddressException:
Illegal address in string ``[email protected],
[email protected]''
at
javax.mail.internet.InternetAddress.<init>(InternetAddr
ss.java:66)
at
WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:
43)
at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBa
e.java:126)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java
826)
at
com.netscape.server.http.servlet.NSServletRunner.Servic
(NSServletRunner.java:533)
both emails are valid.
Thank you.
try using addElement()method of the vector.
or get all the address as one string represented by _to
where _to = "[email protected], [email protected]";
     //set to addresss
InternetAddress to = new InternetAddress() ;
InternetAddress [] toadd = to.parse(_to);
msg.setRecipients(Message.RecipientType.CC,toadd);
i hope this wouldhelp you
thanks and regards,
Suraj Berwal

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

How do I view more than one image at the same time in CS6?

How do I view more than one image at the same time in CS6?

Hi there
If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

HT1657 Can you rent more than one movie at the same time?

Can you rent more than one movie at the same time on itunes?

I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
select * from sales partition (sales_q1_2000)
union all
select * from sales partition (sales_q1_2001)
union all
select * from sales partition (sales_q1_2003)
union all
select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

URGENT: passing more than one value at the same parameter

Hello friends at www.oracle.com,
if I have a Forms program that sends some parameters to a Report, how can I send more than one value at the same parameter that is being sent?
For example: the Reports parameter P_CODE should receive (from Forms) and print the values 1, 2, 3 and 4, each one in a different page. But, only 4 is being printed, and these values aren't saved at a database, so I have to pass the other three values too. How can I solve this problem?
This is quite urgent and I need help on this.
Best regards,
Franklin Gongalves Jr.
[email protected]

Thanks to Oracle Reports Team for answering! I'm sure this will work.
Best regards,
Franklin Gongalves Jr.
[email protected]
hello,
on the forms side, you will have to build the list for this parameter by e.g. string concat.
on the reports side you will have to "decode" this parameter according to how you built it in forms.
e.g. if you pass the list like this "10~20~30" you might use a where-clause in the query
... where instr(myCol, :myParam) >0
regards,
the oracle reports team --pw

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

How to pixalet more than one person on the same piece of footage?

Similar Messages

Maybe you are looking for