How to place push button on right corner of a screen

Hi,
I am creating push button on application tool bar of a screen using set pf-status,usually the push button is created on left hand side of the screen. But I want to put this push button on right hand side of the screen.Is it possibe.....?
Regards
Sudha Mettu

Hi sudha,
1. I dont think its possible.
2. Either u have to put empty
buttonS on the left,
so that your required button,
comes at the right.
regards,
amit m.

Similar Messages

How to ijntroduce PUSH Button in KD_GET_FILENAME_ON_F4

Dear Experts,
I am new to ABAP.
I know how to use push button in Sel-Screen. But my requirement is:
1)How can I use a push button in "KD_GET_FILENAME_ON_F4" so that on hitting the push button a PopUp screen appears.
2) This Pop up screen should be a file directory screen from which I can select a file.
3) This file on one click should get considered as "file_name" of the call function "KD_GET_FILENAME_ON_F4."
Looking forward for advise from experts.
Regards
Chandan Kumar

Dear Mr Klaus,
Thanks for your reply. The method suggested by you will definitely help the user to directly open a file dialogue box. But I want the code to make it more simpler for the user. After I execute the code The use should get a Push Button. On hitting this push button a POP UP screen should appear. This pop up screen should lear us to the target folder.
In your suggestion it was possible to open a folder path pop up screen. just I want to intriduce a PUSH button there. Also I want multi selection to be possible. In your suggestion above when I wrote the code as:
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
      lw_file LIKE LINE OF it_tab,
      gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
*F4 input file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
READ TABLE it_tab INTO lw_file INDEX 1.
p_file = lw_file-FILENAME.
Start-of-Selection.
file_str1 = P_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = file_str1
*    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
tables
    data_tab                      = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the above code when I use Multiselection = 'X' then in the folder pop up multiselection is possible but the multiselection deosn't
gets selected for upload.
Looking forward for your suggestions.
That is my requirement.
Regards,
Chandan

How to add push buttons in out put screen of ALV

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

Hi Kiran,
Here is the sample code.If you are using reuse_alv_grid_display, no need to write code in PBO.
Just double click the 'TEST' which is written in code.Then create a GUI Status.In Application toolbar,type the name of the button you want(say BUTTON).Then double click that name.Then enter the ICON name and function text.Activate it.This itself will work.If you want all the functionalities,then try to do as Vinod told.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = v_repid
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
   i_structure_name                  = 'QMEL'
TABLES
    t_outtab                          = i_qmel
EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status '<b>TEST</b>'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
                         selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
    WHEN 'BUTTON'.                              "Double Click line Item
      call transaction 'MM01'.
endcase.
endform.

How to Add Push Button On Selection Screen

Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.

Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar

How to add push button in alv display with out class or method

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

You should post your question in the ABAP forum.
ABAP Development

How to add push button in application tool bar in SAP transaction VA01

How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.

There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

HT5362 How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?

How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?
Sometimes, when I am about to click something in the upper right corner, the banners stand in the way. It is very annoying.
However, I still need them and it is not an option to completely turn off notifications.
Has anybody faced the same problem?

Yeah, i've been playing around a bit with Notifications, and not being able to move there location is very annoying. The default location normally means it is covering one or more tabs in Safari (or any tabbed application for that matter). Might have to try Growl again.

I don't like the look of the new firefox and I treid to change the theme by clicking on an Add-on, but nothing happened and nothing changed. Also I can't see the minimize and close buttons on the corner of my screen.

the Add-on didn't work to download. It was the Qute theme to make firefox look more like an older version.
Also the top right corner of my screen is black and I can't see the minimize or restore or close button. they work by me guessing where to place my mouse, but the buttons can't be seen.

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

The menulets in the top right corner of my screen have disappeared. What should I do?

My brother was using my iMac today, and logged out of my account. When he did, every menulet in the top right corner of the screen disappeared besides Spotlight and the printer one. I tried to go to System Preferences and bring the menu buttons back up, but when I clicked on them, the check mark would appear but the icon wouldn't go back to the bar. Command+Drag also is not working. I am running OS X Leopard, if that makes any difference. Thanks for helping!

Yes, that's a manufacturing fault. Take it back for a replacement. Don't even try to fix it.
Michael

Dialog programming - How to place a select-option field in a dialog screen

Hi all,
In Dialog Programming, How to place a select-option field in a dialog screen.
Kindly give me some example code...
Thanks,
Jaffer Ali.S

hi Ali,
U can add select-options in ur module pool by using SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN command.
check this link for reference.....
http://help.sap.com/saphelp_47x200/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm
Example Code :
DATA : ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X',
            p_rad2 RADIOBUTTON GROUP grp1,
            p_rad3 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_matnr FOR mara-matnr,
                s_matkl FOR mara-matkl,
                s_mtart FOR mara-mtart.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1010.
START-OF-SELECTION.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CALL SCREEN 1010 .
ENDMODULE.                    "status_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
SCREEN 100 ****************
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
<b>***** where sub_1010 is name of sub-screen area</b>
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE user_command_0100.
<<< REMOVED BY MODERATOR >>>
Harimanjesh AN
Edited by: Marcelo Ramos on Dec 17, 2008 7:54 PM

The lower right corner of my screen clicks when I press on it.

I have an iPhone 5, and when ever I press on the bottom right corner of the screen, it makes a clicking noise. If I press hard, it will stop for a few minutes, but then starts again. Whats wrong?

Stop pressing on it

Why do i get a window in the lower right corner of the screen that says "high memory usage"

why do I get a window in the lower right corner of the screen that says "high memory usage" on my compaq presario using windows xp home edition?

Hi,
No just turn the monitor off, not the product off. Which version of NIS are you using ? Please see the following screen:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

27'mac upper right corner of the screen

March 5, 2010 purchase of IMAC 27, upper right corner of the screen there are yellow. Aftersales staff explained that because the entry of dust, should I bear the cost of repairs. I am very atmosphere!

I recently noticed what looks like dust UNDER the glass at the top left and right corners, as well as a blotch on the LCD itself about 2” x 3” which is only perceptible when you are looking at a white background.

There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...

There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...

abigailfromwaddell wrote:
There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...
You have activated rotation lock. Check the little switch near the volume control.
Stedman

How to give push button in alv report output

hi,
my requirement is that , i have to give push button in alv report output(item level) not in application toolbar, i am using reuse_alv_grid_display FM, can any body provide me sample code
regards,
siva kumar

have a look at this thread, also has a sample report at the end from Uwe Schieferstein.
[button on alv list|How to add and program a pushbutton on ALV grid line;
seems not to work try this:
How to add and program a pushbutton on ALV grid line
Edited by: Micky Oestreich on May 15, 2008 10:20 PM

How to place push button on right corner of a screen

Similar Messages

Maybe you are looking for