How to play 100fps at normal speed?

Hi folks
I have material which the DOP says is shot at 100 fps. (Shot on Sony fs700). I want to play that at normal speed in my 1080 25p FCPX Project. By normal speed I mean real time.
What bugs me is that in the clip info in FCPX the material shows as 1080 25p material. I've tried speeding up the material to 400 %, but it doesn't look right. Too fast. Is there any other way other than to mess around with speed %?
Hope you can help.
All the best
Lasse

Karsten, you seem to have struck a chord. It seems there's a difference between what the DOP says and what the iMediaHUD says (clever tool, cheers for that). See report below.
Karsten wrote:
And one thing irritates me:
If I read the cams manual correctly, it records in AVCHD - so, how did you convert it to mov?
When I import it, FCPX doesn't let me 'leave files in place" - I'm able to tick the box, but FCPX stil copy it. And when I click to reveal the material in finder the "original material" is now .mov.
For the report I dragged the real original material. I took an .mts file from the AVCHD bundle and this is what the report wrote:
General
ID                                : 0 (0x0)
Complete name                    : /Volumes/Ring til Ramasjang - klippedisk/RaÌoptagelser/Optagelser_121214_nÃ¦re/private/AVCHD/BDMV/STREAM/000 38.MTS
Format                            : BDAV
Format/Info                        : Blu-ray Video
File size                            : 123 MiB
Duration                            : 46s 265ms
Overall bit rate mode                : Variable
Overall bit rate                    : 22.2 Mbps
Maximum Overall bit rate            : 24.0 Mbps
Video
ID                                : 4113 (0x1011)
Menu ID                            : 1 (0x1)
Format                            : AVC
Format/Info                        : Advanced Video Codec
Format profile                        : [email protected]
Format settings, CABAC                : Yes
Format settings, ReFrames            : 2 frames
Codec ID                            : 27
Duration                            : 46s 280ms
Bit rate mode                        : Variable
Bit rate                            : 21.1 Mbps
Maximum bit rate                    : 22.0 Mbps
Width                            : 1 920 pixels
Height                            : 1 080 pixels
Display aspect ratio                : 16:9
Frame rate                        : 25.000 fps
Color space                        : YUV
Chroma subsampling                : 4:2:0
Bit depth                            : 8 bits
Scan type                            : Progressive
Bits/(Pixel*Frame)                    : 0.406
Stream size                        : 116 MiB (95%)
Audio
ID                                : 4352 (0x1100)
Menu ID                            : 1 (0x1)
Format                            : AC-3
Format/Info                        : Audio Coding 3
Mode extension                    : CM (complete main)
Format settings, Endianness            : Big
Codec ID                            : 129
Duration                            : 46s 304ms
Bit rate mode                        : Constant
Bit rate                            : 256 Kbps
Channel(s)                        : 2 channels
Channel positions                    : Front: L R
Sampling rate                        : 48.0 KHz
Bit depth                            : 16 bits
Compression mode                : Lossy
Stream size                        : 1.41 MiB (1%)
Text
ID                                : 4608 (0x1200)
Menu ID                            : 1 (0x1)
Format                            : PGS

Similar Messages

How to play videos in normal quality in youtube as it is always buffered in hq and there is no option to change quality??

how to play videos in normal quality in youtube as it is always buffered in hq and there is no option to change quality?? problem because i hav network speed upto 512kbps and hq videos are nt buffered properly in it..

macalltheway wrote:
What a bummer.
Now I'm stuck with a just-about useless camera. I really need something as small as the FH1 (it's TINY).
Hard-drive camcorders record MPG2, which I assume makes them just as useless.
Is then MiniDV the only choice for a sub-$500 1080i/p camera that will allow me to edit footage without converting?
If so, any tips on the smallest one out there?
Google came up with Sony's DCR-PC55, but it's four years old and only does SD...
Do you want good OR do you want cheap? That is the decision you need to make. Also, tiny tends to be the opposite of good.
P.S. AIC converted it best; ProRes(Lo/HQ) left it pixelated for playback. But it takes about an hour a minute, and increases the file-size tenfold, so it's no good anyway.
Yes, your actual editable video file is going to be 10x bigger than a MPEG-4 file. That is what you want.
P.S. 2 "....FCP is converting your video behind the scenes which is causing all your problems."
If that's the case, then my oldish MacBook Pro (2GHz Duo, 2GB RAM) has enough juice to play the 640x480 MPG4 clips smoothly, but not the HD ones. Could the latest MacBook (2.5/6/8GHz, 8GB RAM) could play the 1080p30 clips smoothly?
No, you still have the same problem. MPEG-4 files are non-editable. You really need to convert to an editable format and then bring that into FCP. MPEG Streamclip is going to be your best choice.

Uploaded video plays at twice normal speed, but audio plays normally

I am able to upload video from Panasonic Lumix camera to iMovie08, but video plays back at twice normal speed. Meanwhile, audio plays back at normal speed. I posted a video on iTunes just to see if the problem remained and it does. How do I fix this so video plays at normal speed?

Like I say, there are two 24 modes on that camera. Is your sequence set up for 24fps or 29.97? Whichever one it is, try the other and see if it makes a difference.
What were your capture settings? You need to clarify that you've captured correctly (I'm not sure whether it's possible to capture 24fps material incorrectly as I've never tried).
The basic thing you need to do is determine whether you shot native 24 or 24 converted in camera to 30, and work forward from there.
You might find more experts on your camera and its settings over at [www.dvinfo.net]

How can I get tracks to play faster than normal speed in itunes?

I have lectures, audio books, and other recordings that I would like to play at faster than normal speed (like 1.5X or 2X normal speed).   I've set all of these recordings as audio books because I read that they have the option to play faster, but, I can't find how to actually make them play faster. I also read that it's possible to open them in quicktime, but that is very much less than ideal and a waste of time. Surely there is a way to do this in itunes, but I can't figure it out.
Thanks for any help.

I will show you how I played my audio or mp3 files at any particular speed. This method will allow you to simply enter in your desired speed.(ex. 1.5 or 1.33)
In my case Im using an audio book [Lord of the flies] I download off youtube as a MP3 file using this program:
http://download.cnet.com/MediaHuman-YouTube-to-MP3-Converter/3000-2140_4-7544580 3.html
      First off, you will need to make sure your audio file is open in QuickTime player rather then iTunes. First you need to locate the audio file. If your audio file is in itunes then right click the file and select "Show in Finder"
     The file should open in a finder window, highlighted. Right click the file, go to "Open With.." And click Quicktime Player. (If quickTime Player is not an option, you need to go to "Other..." and select QuickTime Player from your Applications folder)
Now that your mp3 file is open in a QuickTime window you may proceed to step 1.
1) Open Finder
2) Click Applications
3) Click Utilities
4) Open AppleScript Editor
5) In the program copy and paste the script below.
6) Click "Compile"
7) Now to test this script, click "Run" A window should pop up prompting you to enter your desired speed (default is 1.5)
8) press "OK" and quick time should start playing your audio at the speed you entered in.
9) If you would like to use this script again, go to File > Save... >Name your AppleScript and save it Anywhere (I saved mine in the Music Folder for easy access)
tell application "iTunes"
pause
set myTrack to location of current track
# the player’s position within the currently playing track in seconds
set mySeconds to player position
end tell
# show a Dialog
set SpeedFactor to 1.5
display dialog "Enter speed factor:" default answer SpeedFactor
set SpeedFactor to text returned of the result
tell application "QuickTime Player"
activate
# pause all previously opened documents
set open_docs to documents
repeat with doc in open_docs
pause doc
end repeat
# open the track just played in iTunes
open myTrack
# get the 'QuickTime' document, MyTrack should be equivalent but it isn't
set MyMovie to first document
# rewind by 10 seconds
if mySeconds > 10 then
set mySeconds to mySeconds - 10
end if
# set current time
set current time of MyMovie to mySeconds
# set Speed Factor and start playing
set rate of MyMovie to SpeedFactor
end tell

Podcasts playing back at improper speed after recent iTunes upgrade

iPod Touch G2
After upgrading iTunes this week (SHARED > Home Sharing is now in the left pane), podcasts now play back improperly. Different podcasts now play back at higher speeds.
Music (songs) plays back at normal speed.
What to do? Do I have do a Restore?
Thanks.

it's easily done. that's why i always make sure to hit the power button and put it into sleep mode before putting mine in my pocket! (if you double click the home button while it's in sleep mode you can bring up music controls for quick track skips/pauses without having to slide to unlock)

Copied slow motion video from iphone 5s to my pc but play at normal speed - how play in slow motion?

Copied slow motion video from iphone 5s to my pc but now play at normal speed - how play in slow motion?

You have to email it to yourself to preserve the slow-motion effect.

Why is my full length video in after effects only playing normal speed for 20 seconds

Hi everyone,
As I am developing a video "cube" four videos to rotate slowly from left to right allowing each video to show. As I have been able to tackle why the videos were playing so slow I have set them to play at 100% which now gives me normal play or speed for each video. The downside is the videos times shrunk down to a mere 20 seconds (approx) in length of play for each four sides of the cube.
The cube has been set to turn for approx 5 minutes.
So my goal with your help if you can please help me with a solution.
My thanks to you!
Merry Christmas!!
Bob

Hi Rick,
Again my thanks!
The "Cube" is really coming along. I have all four videos now playing at normal speed or original file speed.
Now things will get really exciting. How many ways to develop the Cube Comp!?
It has endless possibilities.
Thanks for being there!
Regards,
Bob

How do I play podcasts at 2x speed

I recently played a podcast on my iPod nano and it was mysteriously at 2x speed. But the next time I played it it was at normal speed.
I would LOVE to listen at 2x speed, at least to one particular podcast (Taverncast, anyone? Could you speed it up, please?).
But I can't figure out whether there's a way to do it on purpose. Is there a way to play a podcast at 2x speed?
Thanks!
-Sara

Items in a playlist will play continuously, so make a playlist named Rush and put all the podcast episodes in there. Arrange them in chronological order (instead of backward like the Podcast library does). Then play this list. All episodes will play, one after the other. This is how I always listen to podcasts because I like a variety of shows and alternating news, humor, music, etc.

Playing a file faster than the normal speed

How do you play a file on quicktime at 1.5 the normal speed?

Open the A/V Controls window (Window menu).

HT1414 My iPod touch got stuck on fast forward on the sound and I can't get it back to normal. How do I restore normal speed sound?

My iPod touch got stuck on fast forward on the sound and I can't get it back to normal. How do I restore normal speed sound?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Podcasts playing back at 2x normal speed

Since updating my 4G nano with the latest Updater version 5.1, podcasts play at twice their normal speed (sounding like the old time Chipmunks). To fix the problem (each time after powering the nano up), I need to jump to any other podcast during playback. When I do suddenly the playback goes to normal speed. Then I can go back to the podcast of interest and it will also play at normal speed.
Anyone else had this experience with Updater 5.1?
MDD G4 dual 1.25GHz, 1.75GB ram Mac OS X (10.4.7) DVDRW & DVDROM drives

Try resetting the iPod...
Reset iPod
Also, try going to Settings-->Reset All Settings (on your iPod).
Finally, make sure the software on your computer and iPod is up to date...
iTunes
iPod Updater
Update iPod's Software
btabz

How can I control my fan speed?

How can I control my fan speed on my macbook pro? I use SMC for gaming and streaming video from the internet when using my Mac OS, but I partitioned my drive and installed Windows 8 in order to play a different game (not a huge game) and the computer heats up dramatically when playing on Windows through Boot Camp to the point that it freezes every time (it never does this when playing a mac game or streaming on the normal partition Mac OS).
Any suggestions or programs to control fan speed of the mac from windows?

Get a cooling pad. That will much better than trying to constantly adjust fan speeds.
Ciao.

ITunes plays library at half speed after import

After converting a performance recording tape from analog to digital and storing it in AIFF format, I imported the AIFF file to iTunes (sample rate reported as 96kHz, bit rate 2304 kbps, 24-bit stereo). The first time I played it in iTunes it was fine...but everything else in the iTunes library played at half-speed. Now (after a re-start) the imported file plays at double speed, and the library items play at normal speed.
How can I controll this?
I see the bit rate is much higher that library items, but don't know what is "normal range" or how to control. (I'm doing A/D in Tracktion 3, 24-bit, 96k sampling, and have many options for exporting the file as AIFF.) Any help?

Tap the now playing screen to show the additional podcast and audio book controls. Tap the playback speed control until it shows white. Each tap cycles from 2X speed, 1/2X speed to 1X normal speed.

How to play one clip multiple times at the same time?

I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
myClip.setFramePosition(0);
myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
Edited by: andrasz on Feb 27, 2009 12:37 AM

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

Tip: How to play a playlist one song at a time from iTunes on a computer using the checkbox property

I would like to share a tip about how to play a playlist one song at a time from iTunes on a computer. The tip I am sharing is simple, but I was not able to find it in the iTunes Help. After searching on the internet I found the idea for this solution in a discussion in which this was presented as a frustrating problem rather than a desired behavior. This tip relies on the checkbox for each song in iTunes. For a song in a playlist to play automatically, the checkbox must be checked. To keep a song from playing in a playlist, simply uncheck it. Therefore, to keep all songs from playing automatically in a playlist, simply uncheck them all. Now you have a list of desired songs in a desired order but none of them will play automatically. You can play each one when you want to play it without having to search for the next song and without having to be at the computer to stop the playing after each song.
Step by step:
1. Create the playlist.
2. Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once)
3. Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
4. If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
Based on some discussions I found while looking for a solution (including at least one in which the questioner got bashed about why anybody would ever want to do such a thing and in which the proposed solutions were things like creating one song playlists or simply press stop after each song), some may not understand why this would ever be desired. Here's why I wanted to do it:
I was responsible for playing a series of songs at a dance. I needed to stop after each song to have a transition time to allow me to introduce the next song and to give new dancers time to get onto the floor and other dancers an opportunity to leave the floor. Furthermore, I was also dancing and didn't want to have to spend time searching for the next song (which is why I wanted to create a playlist in advance with just the songs I wanted to play in the order I wanted to play them) and I wanted each song to stop after playing since I was not at the computer to press stop.
I hope this will help others who have a similar need.

Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

How to play 100fps at normal speed?

Similar Messages

Maybe you are looking for