How to Play a Song Automatically as soon as phone connects to Car's Bluetooth..!!
is there any way to do so..???
first of all . xperia arc works great while connected to my car's bluetooth i don't know why most uses have complaint of the bluetooth , i can make receive calls without any trouble , can play music..
i know we have liveware manager but it just opens the music and does not automatically play a song....
well when i connect the phone to the car , it pairs automatically without any problem , but then i have to open the music player and hit the play button..
no problem i can do this whenever i enter the car , but the problem is when i shut off the engine , and then again start , ( we have long traffic lights so its better to shut off the engine ) it opens the music player ( live ware manager ) but doesn't plays any song..
how to do it..??
also , can we make calls directly in the car without touching the phone..?? i mean when i hit the call button in the car , it just redials , i don;t know if this the car's fault or the phone itself , just want to know if we can go through the phonebook and call anyone i want..
Solved!
Go to Solution.
wait for sometime and buy a wireless head set pro( sony) and just forget the car's bluetooth system :smileywink:
or never switch off ur engine... simple it is
or don't expect the songs to be played automatically :smileywink:
concentrate on driving while u r on road and always wear a seat belt .. keep ur mobile away
this is the best answer u can get on this forum
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.
Similar Messages
-
How do you transfer song from you're i phone to you're computer
how do you transfer songs from you're i phone to you're computer
If you have bought these songs on iTunes Store on your iPhone, it should ask you to do it automatically when you plug in your iPhone to your computer.
-
How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?
It depends on your car stereo. On the JVC we have you can select either "Head Mode" or "iPod Mode" when you're plugged into the USB port. Ipod Mode lets you select the songs from the iPod although the radio still controls the volume. I believe the Alpine I have does the same thing.
-
I replaced my iphone4 with a new iphone4 because didn't connect to wifi or bluetooth. New phone connects to wifi, not bluetooth. How to fix?
Here are the supported bluetooth profiles http://support.apple.com/kb/ht3647
You can't connect to other iphones/ipads/smartphone via bluetooth. -
How to Play One Song Without Repeat?
I am a new Ipod user, with an 80 GB video version. (I don't think it's one of the latest new models, but the second to last generation. Is that "fifth generation"?)I updated it with the latest firmware, just a few days ago.
I have used other MP3 players before though. In most respects I find the Ipod superior to the other MP3 players I have used. However, there is one setting, that I have made before on other MP3 players, for instance my old Creative Muvo 4GB (a few years old), which I cannot figure out how to set on my Ipod.
How does one set the Ipod to play one song, without going on to the next one, and without repeating that one? The default (of course) is to play all the songs in the album or playlist, going on to the next one, when the current song is finished. Looking in Settings, I find one can set "Repeat" to repeat the whole playlist or album when one comes to the end of it, or set it to repeat the same song.
But---what if one wants to play one song, and then have the Ipod stop (or at least pause), and not automatically go on to the next song, or repeat the same song? Is it possible to set that? I cannot see how. If there is a way to do that, please let me know.
Some might ask--why would one want to do that? True, for normal use, the default setting is the best one, going on to the next song, as when one listens to a CD. But, there are cases where one might want the Ipod to play one song and stop. I'll explain my reason for wanting to make that setting--I am an elementary school music teacher. In my concerts with the children this upcoming week, I will put the musical accompaniments for my choirs on the Ipod, and play them from it. When the choir is performing a song, at the end of the song, I don't want the Ipod to start playing the next song on the list. I want it to stop or pause at the end. It will be a hassle for me to have to manually stop it at the right moment, and I might miss it, and it will start playing the next song.
Any way to set it to play one song, and then stop? If so, please tell me.
If not, I would hope that Apple would add that capability to the next firmware upgrade. Do they read here for user's suggestions? Is there another place to make suggestions for improvement in the Ipod firmware?
Thank you for your input.Thank you for the reply, Chris.
I thought of that idea, a separate playlist for each song. That would be fine, if I was only playing one song. But I want to have the list of songs ready to play, so was going to put them in a playlist together. I need to be able to get to the next song quickly, without a lot of messing around with the Ipod.
Is it possible to put playlists within playlists? Then, perhaps I could make an individual playlist for each song, and make a playlist with all those one-song playlists together. If that is possible, it probably still would make it too complicated to go to the next song, probably having to use the menu button to go back to the higher playlist, etc. I want to keep playback simple.
I may try your idea of creating a blank "song" to put between tracks. (Is there also no way currently otherwise, to put a certain amount of empty space in between tracks?)
Thanks also for the feedback link. I will send this concern to Apple, and hope they add that capability soon. -
How to play one song at a time?
I have never had this problem with any of my previous iPod's however I just got a new 32GB Touch after Christmas and I can not figure out how to do this. When I go into my music section and select my artist then album and then a specific song off that album I would like it to stop playing after the song I picked. After the song is done playing that I selected it starts playing the next track. I would prefer it if that only happened if I selected the "Play Album/All" option. I have never had this problem with my other iPods. Hopefully someone knows what I am doing wrong.
Message was edited by: VonDaurieIf you don't find a app to do this, there is always:
a- Use the On The Go playlist and just put one song in it, or
b- Tag all the music on the iPod as "Skip When Shuffling" and play a song in shuffle mode. When the song completes, the iPod will stop playing.
I realize that (b) is not a very good solution, but if you don't normally use shuffle mode it might work for you. -
?? how to play one song only without auto advance
Is there any way to get itunes to play single song without automatically advancingf to the next song in the play list.
hp media center Windows XPYes just uncheck them,
If you have an iPod tho, you will want to make sure "Only Update Checked Songs" is UNCHECKED in the preferences -
How to play one song then stop on iPhone?
iTunes playlist on my computer can play one song then stop because there is the uncheck all songs feature, but apparently iPhone doesn't have the same feature.
Need to play one song then have it stop instead of going to another song in the playlist. Creating 20+ single-song playlists is inefficient.
I know there is the Play on Cue app for $1.99 but why should I have to have another app on my phone do what iTunes on my computer already does built-in (play one song then stop)?"Creating 20+ single-song playlists is inefficient." Please read next time.
-
I've been using a Z10 for about 6 months and I connect the phone to my car (a 2012 Honda Civic) via the Bluetooth handsfree link to receive phone calls and to play songs that are stored on my phone's SD card. When I play a song, the song title, album and artist information is displayed on my car's LCD screen. However, after updating to 10.2.1 this morning, the song information doesn't seem to be sent to the car. No matter what song I play, the car screen says "none" for the title, album and artist. I can still "scroll" though my songs from the car's stereo console using the forward and backward buttons, but alas, no song information is shown. I've rebooted my phone several times, deleted the Bluetooth connections on my phone and in the car and then reconnected, but no dice. I must admit that I'm really annoyed about this. This is pretty basic stuff. Does anyone else have a similar experience?
Solved!
Go to Solution.Hmmm...very strange. In the worst of the worst cases, the reload process I used was:
Fully document configuration
On Device WIPE
AutoLoader Reload
On Device WIPE
Reload all configurations (not a restore from backup)
Reload all media from PC
Launch media app and wait for it to full scan for media
Pair with vehicle and see it it now works
Tedious I know, but sometimes required especially with emerging technologies.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Newbie can't figure out how to play one song only.
So I just got up and running with my new iPod 80GB Video. I ripped 3 CDS of tunes to mp3's with iTunes and loaded them into the iPod and it plays but I can't figure out how to just play a single song, it always continues to the next song alphabetically. I've looked in the online manuals and couldn't find where you set "single" instead of "play all". I'm in Songs menu, not Artists or Albums. Please help.
The iPod isn't designed to work like this, and I think the only workaround is to create a playlist with one song in it.
-
How can play Itune song when authoriaztion does not work?
after sharing Itune file, how can I play song when computer authorization process does not work?
Hi dewhi,
You can use the Adobe Cleaner Tool to uninstall CS6.
You can download the cleaner from : http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -
I am trying to build a simple player inside my swf file. The code is a bit messy but it seems to work.
I´m using a soundChannel for Playback..
I´m trying to figure out how to have the player play the next song once the previous one has reached its end.
Do I add some sort of EventListener to the soundChannel?
Thanks for helping
import fl.transitions.*;
import fl.transitions.easing.*;
prevBt.buttonMode=true;
playBt.buttonMode=true;
stopBt.buttonMode=true;
nextBt.buttonMode=true;
pauseBt.buttonMode=true;
pauseBt.visible=false;
var xmlLoader:URLLoader= new URLLoader;
var temasURL:URLRequest= new URLRequest ("temas.xml");
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded)
xmlLoader.load(temasURL);
var temasXML:XML = new XML();
temasXML.ignoreWhitespace=true;
function xmlLoaded(e:Event):void{
temasXML =XML(xmlLoader.data);
var temaNum:Number=0;
var tema:String = temasXML.tema[temaNum].mp3;
var musica:Sound = new Sound(new URLRequest("audio/"+ tema))
var sc:SoundChannel;
var isPlaying:Boolean = false;
var pos:Number=0;
stopBt.addEventListener(MouseEvent.CLICK, parar_musica);
function parar_musica(e:MouseEvent):void{
sc.stop();
isPlaying=false;
playBt.visible=true;
pos=0;
playBt.addEventListener(MouseEvent.CLICK, tocar_musica);
function tocar_musica(e:MouseEvent):void{
pauseBt.visible=true;
playBt.visible=false;
if(!isPlaying){
sc= musica.play(pos);
isPlaying=true;
playerTx.text=temasXML.tema[temaNum].legenda;
pauseBt.addEventListener(MouseEvent.CLICK, pausa_musica);
function pausa_musica(e:MouseEvent):void{
if (isPlaying){
pauseBt.visible=false;
playBt.visible=true;
pos=sc.position;
sc.stop();
isPlaying=false;
nextBt.addEventListener(MouseEvent.CLICK,seguinte);
function seguinte(e:MouseEvent):void{
sc.stop();
temaNum +=1;
musica= new Sound(new URLRequest("audio/"+ (temasXML.tema[temaNum].mp3)))
sc= musica.play();
pauseBt.visible=true;
playBt.visible=false;
isPlaying=true;
playerTx.text=temasXML.tema[temaNum].legenda;
prevBt.addEventListener(MouseEvent.CLICK,anterior);
function anterior(e:MouseEvent):void{
sc.stop();
temaNum -=1;
musica= new Sound(new URLRequest("audio/"+ (temasXML.tema[temaNum].mp3)))
sc= musica.play();
pauseBt.visible=true;
playBt.visible=false;
isPlaying=true;
playerTx.text=temasXML.tema[temaNum].legenda;if I declare:
var musica:Sound;
then add the EL:
musica.addEventListener(Event.COMPLETE, song_ended)
function song_ended(e:Event):void{
trace("finished");
pauseBt.visible=false;
playBt.visible=true;
isPlaying=false;
and finally load the sound into the variable:
musica= new Sound(new URLRequest("audio/"+ (temasXML.tema[temaNum].mp3)))
I get this error message:
TypeError: Error #1009: Der Zugriff auf eine Eigenschaft oder eine Methode eines null-Objektverweises ist nicht möglich.
at index1_fla::player_33/xmlLoaded()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
(sorry about the untranslated text, I bought this laptop in Germany)
which leads me to think that the COMPLETE event in the Sound Class is related to the loading of the sound rather then the playing of the sound (correct me if I´m wrong).
On the other hand,
var musica:Sound = new Sound(new URLRequest("audio/"+ (temasXML.tema[temaNum].mp3)))
musica.addEventListener(Event.COMPLETE, song_ended)
function song_ended(e:Event):void{
trace("finished");
pauseBt.visible=false;
playBt.visible=true;
isPlaying=false;
doesn´t work either. As a matter of fact, after I´ve written:
var musica:Sound = new Sound(new URLRequest("audio/"+ (temasXML.tema[temaNum].mp3)))
it´s as if I can no longer add an Ev Listener (it´s not there on the list of options anymore) -
HT2688 How to play same song of two different computers at the same time
Hi I have turned on Home Sharing. So one computer can play music on another. Is there any way to have one computer play what the other computer is playing at the same time. Other than just starting the same song as close in time as possible on each computer.
create an album of all of the photos you want to order, open the album, select all and order - be sure teh photos are cropped to the print size so unexpected cropping does not occur during the printing process
LN -
How to play karaoke song with lyrics
I've purchased a couple of karaoke songs, but when I play them the lyrics don't show. Is there something else I need?
The Music app on the iPad doesn't currently support lyrics (http://www.apple.com/feedback/ipad.html), so you'll need to look in the app store for a third-party music app that does - you could also do a search on this forum to see if any have been recommended.
-
How do I delete songs completely off of my phone?
I delete the songs on my phone but there is a cloud thingy by them, and my phone still plays them. How do I get rid of the songs completely?
You can go to settings>music and disable show all music. See if this removes the songs from your music library
Maybe you are looking for
-
I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to
-
When I try to "Add" printers I get error message "The application Printer S
In the Set Up Printers Utiity when I click on "Add" I get an error message saying "The application Printer Setup Utility has unexpectedly quit", with a dialog box asking "would you like to submit a bug report to Apple?". Help? iMac G5 Mac OS X (10.
-
My hard drive crashed and along with it my Adobe Acrobat XI standard purchased last year. How can I reinstall the program without having to purchase another copy?
-
Display the full file path in title bar
I apologize for my username. After getting a ton of "username already exists" I went to the keyboard crushing technique to find one that didn't. We currently use Adobe Acrobat 9.5.4 I am assisting a user who would like the full file path of the opene
-
Host string(s) on NT
How can we find out all the valid host_strings to login to SQL*plus on NT? Tried leaving it as blank and logging in a system/manager, scott/tiger... but neither worked. Please advise ASAP.