How to play all selections?

iLive 05 Suite
We have a school project that has 18 small iMovie segments. I have figured out how to use mapping, folders and subfolders so I can group and arrange these student masterpieces using iDVD.
The final piece of the puzzle is: Is there any way I can configure iDVD so the resulting DVD will have an option to play through all the 18 mini movies or can the user only select one at a time to view?
Remember, these are 18 individual iMovies that I am bringing into iDVD and NOT one iMovie with 18 chapter markers.
Thanks for any help,
Sue

Hi Suzanne
No iDVD can't do that easily but if by any chance the 18 movies together is
less than 60 min then You can import them into a new iMovie project and
make one 18 chapter movie as You say and add this to the 18 individual ones
that you already have.
To make a DVD with a play all movie and chapters that ends in the iDVD
start menu You have to do a double set. I think that this is possible in
DVD-Studio pro.
Yours Bengt W

Similar Messages

How to play all?

I'm trying to make a dvd with two movies and I was wondering how would I be able to make the dvd play all the contents at once rather than going back to the main menu after every movie.

Hello, itsaboutmomo,
Welcome to the discussions!
You can put both of your movies into one iMovie, and put that into iDVD to have them play as one long movie.
If you use iMovie 6 you can put a chapter marker at the beginning of the second movie. Then you will have the iDVD options to choose either 'Play Movie' to see the two movies consecutively, or 'Scene Selection' which will take you to a submenu where you can choose to view either movie by itself.
Or, you can put the three movies (the long one with both movies as above, and the two original ones) into iDVD and place them on the main menu so that the viewer has the three options at the beginnning. You may have to do Copy/Paste if iDVD places the short movies on another submenu, but you can do that to get them all appearing on the main menu. If you wish to do this and need more help, post back.

How to view ALL selected tracks in iTunes

Simple question, I hope, but I've got more tracks on my iTunes than I can fit into my iPhone and I would like to be able to see how much memory my selected tracks take up, in total, not just by artist, before I try to sync.
Is there anyway of viewing all selected tracks in iTunes?

Create a new playlist using the command File > New Playlist. Drag the selected tracks into it. Open the playlist and look at the bottom to see the number of tracks, total size, and playing time.

Subtitles not appearing when play all selected.... please help

Hello All,
The deal goes like this... I am making a DVD for a national park and I have 4 videos
3 of which have subtitles. The subtitles are on a separate menu and you don't have to select to show subs, they are automatically selected when the viewer selects the video of choice. The client now wants a play all button, which I did with stories. Well it works fine in the simulator but when I burn the DVD nothing.... The subtitles are still available on the single tracks but not when you selected all.
Any ideas.

It should work, is the pre-script set in the story or the track?
Actually stepping back a second, how is the project set-up? It looked like it was stories between tracks?
Also take a look here
http://discussions.apple.com/message.jspa?messageID=2069686#2069686
http://discussions.apple.com/thread.jspa?messageID=2065380&#2065380
And as Hal noted here sometimes prescripts act strange so you could also try the same script as standalone
http://discussions.apple.com/thread.jspa?messageID=5425873&#5425873

How to play all the songs in my library

I have problems with the configuration of iTunes, it only play the songs that have the selection mark, and I don't know how to change the configuration in order to play all the songs in my library. Please, if someone know how to change this configuration, answer this message. Thanks!

There are several ways around this that work much better than unchecking stuff since you will still want to be able to play this in iTunes automatically.
One way is to manually manage the iPod...
Managing content manually on iPod
http://docs.info.apple.com/article.html?artnum=61148
which will let you simply drag into the iPod the stuff you want or select and delete from the iPod the stuff you want off. The downside of manual updating is that play counts and ratings you set in the iPod are not synced back to your library.
The other method is to use Playlists and Smart Playlists and set your iPod sync preferences to sync only the playlists you want. See this post of mine from earlier today that tells one way to set up a Smart Playlist to be just the right size for your iPod...
http://discussions.apple.com/message.jspa?messageID=4408531#4408531
Patrick

How to play all my mucis

how to i play all the music i play on i-tunes

iTunes will play video podcasts consecutively only if they are in a playlist. You can manually create a playlist, or create a smart playlist with the following parameters:
Match all the following rules
Podcast is true
*Play count* is 0
Kind does not contain audio
Live updating
Now you have a playlist full of all unplayed video podcasts that will update automatically, including removing played podcasts. Hope this works for you.

Camileo S20 - How to play all recorded videos?

hi all!
Ive not long had the camileo s20, so still trying to get mt head around it. I think ive managed the basics but im having a problem with play back.
When i recored a video - 6 mins long, but i pause the recording half way through, then go back on to start recording where i left off, during play back it will play the movie sepratlely and i manualy have to start the other half of the video to play.
Is there anyway i can just click play and it plays all my recorded videos continuously? a play all setting?
Thanks

Hi wayne_1,
First of all I can recommend checking the user manual. It contains a lot of informations about your camera and how to use all features.
I have checked the user manual but unfortunately I think such a playback function isnt available. With the playback button you can switch to playback mode and use the left and right button to go to the next picture/movie.
But there is no function about playback of all videos.

How to play all movies on Apple TV

Hi,
I have couple movies on the Apple TV. But Each time, I have press play to next movie.
How to do like Photo and Music? They are keep playing.
Is this possible? Any trick to play all movies on Apple TV without keep press play to continue to next movie.
Anyone know about this?
Cheeers

Ge0ph wrote:
I have a playlist called shows that has a few TV shows, movies, and podcasts. I also have the latest versions of iTunies and Apple TV. The playlist doesn't show up anywhere on the Apple TV.
Where should it be?
the playlist option will show next to where "genre" is only if the playlist contains the appropriate content for the section that you are in.
for example i have a playlist that contains all episodes of a season of King Of Queens. the playlist shows in the "my tv shows" section, but does not in "my movies", as the playlist only contains tv shows.
might be an idea not to mix content in playlists, as you won't be able to play mixed content from a playlist anyway.

How to "Play All" in DVD Studio Pro

Hello: I'm putting a dvd together that has a collection of short films on it, and I'm listing each film on the menu, but I also wanted to add a "Play all Movies" option to the menu. I know how to create the button, but I'm not figuring out how to make the target of the button all of the movies. Do I have to link all of them together in final cut first and make a single movie file out of them, or is there and easier way to make them all play in dvdstudio?
Thanks...Mark

http://www.kenstone.net/fcp_homepage/dvdsp_playall_russell.html
MtD

How to play all exept one album

Hello there!
Is it possible to play all music except one album without organizing or using a playlist?
If yes can you teach me?
Thanks

No. You would either need to not sync that album or create a Smart Playlist that includes everything except that one.
Creating a Smart Playlist is pretty simple.
-Peter

Ipad music video library - how to "play all"?

I have a stack of music videos on my Ipad2. Each one has to be started manually. Is there some way I can do a "play all"?
Google no help, seemingly,
Thanks
Ron

Thanks. I won't waste any more time.
Odd function for Apple to omit, though.

How to Play all type audio or video file in Flex 4.5 mobile

Hi,
I need audio player and video player include by Mobile app.
<s:VideoPlayer - not mobile optimized.

First of all, thanks for your reply.
second, the way i found is this: http://www.sparkfun.com/products/10748 sparkfuns IOIO device. i'm planning to use its UART port for real time serial communication.
yet the thing i couldnt understand is, how people never feel the need to use threading in Flex. I mean, HOW?

How to clear all selection screen parameters before calling transaction?

Hi Experts
 I have a ABAP report that displays data using ALV.
When I double click a cell it calls transaction MB51. Before calling the transaction I need to set some parameters of the selection screen of the transaction.
My code is like below:
<UL>
 <LI>FREE MEMORY ID 'MAT'. "material
 <LI> FREE MEMORY ID 'WRK'. "plant
 <LI> FREE MEMORY ID 'CHA'. "batch
 <LI>* Get the selected ALV row data
 <LI>READ TABLE i_recon INDEX p_selfield-tabindex INTO x_recon.
 <LI>* If link MB51 is clicked then open tcode MB51
 <LI> IF p_selfield-sel_tab_field+8(4) = 'MB51'.
 <LI>* Pass material, plant to the corresponding tcode
 <LI> SET PARAMETER ID 'MAT' FIELD x_recon-matnr.
 <LI> SET PARAMETER ID 'WRK' FIELD p_plant.
 <LI> CALL TRANSACTION 'MB51' AND SKIP FIRST SCREEN.
</UL>
The problem is:
<UL> <LI> 1. First, I run the given transaction before running the report in a separate session with some set of values in the selection screen. For example: plant = AB01, Material = 990001 and Batch = 10001.</LI>
</UL>
<UL>
 <LI> 2. Then in another session I run my report. In the report ALV I have selected a record where plant = AB01, Material = 990001 but Batch is blank. But it opens the transaction with plant = AB01, Material = 990001 and Batch = 10001.
Even though in my ALV record the batch is blank yet it uses the batch value from the memory. That is, the batch value that was given in the transaction earlier. Why it is not getting cleared? I have also used FREE MEMORY ID code in the beginning. But still it is not clearing the values in the memory.
</UL>
<UL>
 <LI>What shall I do to clear all the selection screen parameters before calling the transaction?</LI>
</UL>
<UL>
 <LI>
Thanks
Gopal
</LI>
</UL>
Edited by: gopalkrishna baliga on Aug 11, 2010 10:29 AM

Its because sap memory is globally shared.
Do it like this.
READ TABLE i_recon INDEX p_selfield-tabindex INTO x_recon.
IF p_selfield-sel_tab_field+8(4) = 'MB51'.
perform bdc_dynpro using 'RM07DOCS' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ONLI'.
perform bdc_field using 'MATNR-LOW' x_recon-matnr.
perform bdc_field using 'WERKS-LOW' p_plant.
perform bdc_field using 'CHARG-LOW' p_batch.
perform bdc_field using 'DATABASE' 'X'.
call transaction 'MB51' with i_bdcdata mode 'E'.
endif.
form bdc_dynpro using program dynpro.
clear la_bdcdata.
la_bdcdata-program = program.
la_bdcdata-dynpro = dynpro.
la_bdcdata-dynbegin = 'X'.
append la_bdcdata to i_bdcdata.
endform.
form bdc_field using fnam fval.
 clear la_bdcdata.
 la_bdcdata-fnam = fnam.
 la_bdcdata-fval = fval.
 append la_bdcdata to i_bdcdata.
endform.

Zen v+ - how to play all tracks in artist/album/track-number or

i got my zen v+ yesterday and am very excited, but...
i've read the help, tried every play mode and every option on the player, searched this forum and an another forum w/o success
this seems like a very basic ability - i must be missing something obvious
i installed/used the media explorer included with the player and used the included sync tool
my wmv's are tagged, they appear to be organized properly when browsing by artist and album
somebody please help me
tia,
brett
ps.
also want the ability to skip an artist if i'm not in the mood for their musicMessage Edited by brettvplus on 08-24-20072:44 PM

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

Video Question, How to play all at once

Hey everyone, I have a list of videos i'd like to play one right after the other but i cannot seem to be able to do it. Is there any way to do this? I don't see why there wouldn't be, I probably just can't figure it out. Thanks!

Get a halfway decent system, something like:

How to play all selections?

Similar Messages

Maybe you are looking for