How to play an mp4 file on iphone 6

I have just bought an iPhone 6 that I want to use for watching movies when traveling - so I went for the 128GB to be able to store a few movies.
But I am lost - I have followed the instructions to use iTunes to transfer a movie (mp4) file. But where is the file on the phone? And what app do I use to play it? And BTW, will the wonderful VLC app come back for ios 8?

You have to sign out of the account. If the phone is using find my iPhone, you must have the ID and password to remove the phone from the account and activate with your own.

Similar Messages

How to play quicktime .mov files on iphone

I would like to be able to play quicktime (.mov) files on my iphone4s but I get a message that my file cannot be played on this iphone.
I created the file in keynote, exported it to a quicktime movie with the manual advance option.
My goal is to be able to use iphone to connect to a projector with a iphone to vga adapter and thus project my presentations from the iphone.
But I cannot import import it using itunes to the iphone.
Wondering if there is an app that plays quick time movies or some other option.
The reason I cannot export from keynote is that it does not give the option for manual advance.
It only provides a fixed time option.
Appreciate any help
thank you
jac

The movie/video must be in an iPhone compatible format.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.

How to play a MP4 file?

Hello all, I'm a new iPad user, I'm just want to play a MP4 (recorded using a GoPro HD camera) in the iPad. I've added the file to iTunes but when sinchronizing an error message says the file was not copied to the iPad because it cannot be played.
These are some properties of the video file:Lenght: 11:05; Size: 963MB; Frame width: 1280; Frame height: 960; Frame rate: 29 frames per second, Data rate: 12014 kbps; Total bit rate: 12142 kpbs.
Thanks for any help!

The supported video formats are (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

How to transfer mp4 file to iphone 5c

how to transfer mp4 file to iphone 5c?

The codec of the .mp4 file should be H.264 or MPEG-4.
If you think it’s difficult to understand, you can use the iPhone PC Suite to transfer the .mp4 file to your iPhone 5c. The software will automatically convert the video file to iPhone supported format before transfer.

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

HT1349 How can i shift my files from iphone into a new android phone?

How can i shift my files from iphone into a new android phone?

There's no files to shift.

Playing an mp4 file from my iPad on to a TV screen.

I am playing an mp4 file from my ipad 2 on to a TV screen. I would like to see the video on both the TV screen and my ipad. Currently the video can only be seen on the TV screen.
I am using an HDMI cable with an adapter to connect the ipad to the TV screen.
Thanks
Dave

OK, I can get the video to play, but I have no ability to scroll thru the movie.

How to play a FLV file located in a second FMS?

How to play a FLV file located in a second FMS not directly accessible by the flash client?
- I am publishing an audio stream from the flash client to a FMS;
- This FMS then publishes the stream to a second FMS, which records the stream to a FLV;
How can I play in the client the FLV audio file that I recorded in the second FMS?
- The first FMS is accessible by the flash client, but the second FMS is only accessible by the first FMS.
thanks in advance
fabio

Answer in http://www.flashcomguru.com/forum/forum_posts.asp?TID=4276&PN=1&TPN=1

N80 Restarting "WSOD" when playing large mp4 files

I love Anime's so I'm converting my "RMVB" or "AVI" video files from my pc to "MP4" so that i can watch in my N80.
here is the setting when i convert the files to MP4:
Video
-resolution is "352x288 (CIF)"
-frame rate(FPS) is set to "auto"
-Bit rate is set to "512"
Audio
-im just setting it to "mono" and "128kbps"
file size: is almost 110mb
there are two situation that i observed before the WSOD is happening:
1st situation:
when i try to play the mp4 file using "imaging folder---> realplayer".
2nd situation:
when i try to play the mp4 file using "gallery--> images and videos".
both situation makes my n80 restart A.K.A "WSOD" but the difference is it is restarting more often when im using the 1st situation that i couldnt enjoy what im watching.
In the 2nd situation i can play up to two 30 mins MP4 videos and then on the 3rd video usually WSOD will appear.
can someone tell me why this is happening? And this is only happening when im watching Video. Is this a firmware bug? pls help
By the way i have the latest firmware for my n80IE
V5.0719.0.2
24-05-2007
RM-92
Nokia N80(12)
thanks in advance

hi scoobyman
actually i already read that thread, and my settings are correct except for the "bitrate"... he said that the maximum recommended bitrate is "350 kbps"
my setting for bitrate is "512kbps"
i think that 512kbps is still ok in n80, because when i try to look at the properties of the "recorded video" of my n80. here are the properties:
(ORIGINAL PROPERTIES OF RECORDED VIDEO ON N80)
video
-Bitrate is 574kbps
-format mpeg4
-size/resolution 352x288
-frame rate is 15 fps
sound
-format mpeg4aac
-bitrate 0kbps
-sample rate is 16000hz
-channel is mono
as you can see, the recorded video file of n80 has bitrate of 574kbps
here is my setting when im converting my PC file for my n80:
(MY SETTING IN CONVERTING FILES TO MP4)
video
-Bitrate is 512kbps
-format mpeg4
-size/resolution 352x288
-frame rate is 15 automatic
sound
-format mpeg4aac
-bitrate 128kbps
-sample rate is 44100hz
-channel is mono
i dont exactly know if theres a problem in my sound setting but i think the video
settings are correct. and also according to el_loco
"Audio: NB-AMR, WB-AMR or MPEG4 audio in mono or stereo, up to 128 kbps @ 44.1 KHz.
Sample rate."
that makes my sound setting also correct.
i dont really know why this is happening, im suspecting 3 things here:
-a bug in firmware
-version of realplayer
-or the converted file itself
if its the converted file can you please recommend a good video converter for nokia.
thanks =)Message Edited by wicked on 05-Jul-200703:22 PM
Message Edited by wicked on 05-Jul-200703:23 PM

How to play a wave file through the DAQ board?

Hi there,
we want to play a wave file that is saved on the harddrive via the DAQ board. Means we want to connect a amp to the analog output of the DAQ to amplify the sound and play it through a speaker.
We couldn't find any VI that does that. Can anybody tell us how to play a wave file, or perhaps even send us a VI that can do that?
Thanks a lot for your help
Martin - Physical Optics Corporation

Hi Martin,
The only example that I could find on how to do this was using our
older Traditional DAQ drivers version 6.9.3. If you're using Traditional
DAQ drivers, the vi can be found here.
The example reads a 8-bit mono .wav file (an example .wav file is included in the .zip file) and writes it to the analog out of your DAQ card. I've updated the
example to work with our newer DAQmx drivers and attached it here.
I hope this helps,
Paul C.
Message Edited by Paul C. on 08-14-2007 05:47 PM
Attachments:
daqmx_wav_file_to_ao_output.zip ‏27 KB

How can I sync text files into iPhone?

How can I sync text files into iPhone? like doc. txt. for reading or editing

The native iPhone OS doesn't allow that. I think there are several solutions to this, some of which may be against the AT&T or Apple rules. One legitimate solution is The Missing Sync for iPhone by mark/space (http://www.markspace.com).
Before I had an iPhone, I owned a copy of The Missing Sync for Windows Mobile. It was a pretty decent app. In my opinion, though, their app for the iPhone is NOT worth the price ($40 new, $25 for a cross-grade).
Also, check the App Store (if you have 2.0 software)--there may be an app that does this, probably for a lot less $.

How to password protect numbers file on iphone?

How to password protect numbers file on iphone?
I've made a password protected numbers file on iMac and saved it to itunes.
When i open this file on my iphone for the first time i have to type in the password. But afterwards it's not protected anymore and i can open the file without the password!
How can i secure my files?

There is at this time no way to put a password in the Numbers app nor on a Numbers spreadsheet, and as Michael said it's not something a third-party developer could add. You can suggest that Apple add a password feature via their feedback pages:
http://www.apple.com/feedback
or you can look for a third-party spreadsheet app that does allow password-protecting a sheet. Documents To Go from Dataviz is a commonly-recommended app that supports spreadsheets, but I don't know if they support passwording.
Regards.

How to clean the junk files in iPhone 5S

How to clean the junk files in iPhone 5S

Howdy sdshiras,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides a lot of great information that you can use to identify content which is taking up storage space on your iPhone 5s.
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
Cheers,
-Jason

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

TS3778 How do I open MP4 files with VLC?

How do I open MP4 files? I have VLC open on my desktop but cannot manage.

mushybutt wrote:
I believe the proglem is with in Adobe CS5 and something just isnt working correctly and that maybe why it cant read or do anything with RAW files. I also noticed that Adobe's site says that it supports canon 70D CS2 files. my camera files are CR2, im not sure if maybe that might have something to do with my issue.
Nothing to do with anything being faulty in CS5.
The reason has already been given by tpolakov above: The 70D was first supported in Camera Raw 8.2 which is only compatible with CS6 and later. CS5 is not compatible with Camera Raw 8.2 so CS5 cannot read Raw files from the 70D. That's all there is to it.
mushybutt wrote:
Thanks Tomsm13, I actually tried to convert the files to DNG but that doesnt work either. I used the latest compatable Adobe DNG converter and i get a message that it can not find any camera RAW files to convert.
You select a folder containing CR2 files, not a CR2 file.
See Camera Raw: How to use Adobe DNG Converter - YouTube
From 1.40 onwards.

How to play an mp4 file on iphone 6

Similar Messages

Maybe you are looking for