How to play analog sound with PC input

Hello,
I have connected a pc to the pc input (VGA sub D15) in my TV 46TL933. I am looking to connect the analog audio output from the pc into the TV. I already tried to connect the audio signal to the component input, but the tv doesn't listen that input when switched to pc input. How to play sound from pc on the 46TL933 TV ?
Thank you in advance for everyone who helps me.
Kind regards
John

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Similar Messages

How to Play Stereo sound with the MIDI API

Hi!
I wanna know how can I make and application like the FL Studio's Piano Roll using the java sound midi API.
How can I convert this MIDI sequence to a stereo sound.
Thank's a lot for your answers

http://java.sun.com/j2se/1.5.0/docs/guide/sound/programmer_guide/contents.html
http://java.sun.com/products/java-media/sound/index.jsp
http://java.sun.com/products/java-media/sound/list.html
lutha

How to play a slideshow (with movies) from Iphoto to Apple TV second gen

Hi,
Does anyone know how to play a slideshow with movies, that I normally play perfect with Iphoto (I even can add music)to let it stream to the Apple tv second gen?
So I have some movies on Imac from a holiday in Egypt and Iphoto alows me let it play as a movie.
How can I setup my Apple TV so that it is the same on my Apple TV? So with nice fade ins and outs?
Thanks

Ok Thank you, but I have one more question.
The Iphoto library is loaded with different movies and Photos. They are sorted by date.
Is there a possibily to make folders in Iphoto. So that I have on folder called for example "vacation Egypt" and put all the movies in this folder within Iphoto?
And then when I select this map it will make a slideshow from all this movies with music? Just like in Iphoto?

How to trigger a counter with AI input

Hi,I have a question on how to trigger a counter with AI input.We are using a DAQ board with two counters(counter 0 & 1),and we have an external synchronization signal input at a frequency of 50 Hz or so.The counter is set to event counting mode.Now we want to trigger one of the counters so that the counter starts a new counting process each time it detects a rising/falling edge from the sync signal.Can anybody kindly show me how to achieve this?Thanks a lot.
Regards
Verdi

Verdi,
I think that the behavior you are looking for can be achieved by configuring the counter for buffered period measurement. The counter starts counting from some initial value with each rising or falling edge on the gate. You could also use buffered event counting, but the count value will not reset with each edge on the gate. I don't know what you're using to program the board, but you could start by looking at the counter examples that are installed with NI-DAQ.
Hope this helps,
Erin

How to play infinite sound

hi,
how to play an (invisble) flashmovie containing a soundloop
over several html-pages? (I use flash8 professional and I'm able to
use script )
thanks for any hints
kesel2

thanks Rafiq Elmansy,
i found a solution which works fine and wasn't such much work
to do, i thought before...
the first call goes to a frameset, where one frame is filled
with the startpage and the other frame (just 1row and color to
background #fff, so it's not visible - don't set the visibility to
hidden, then you get no sound too!).
into the second frame i put the .swf file (width and heigth
=1 px), with the looped sound, which now playes in all pages and
even in the pageloading times...
if nesseccary you could also add buttons to controll the
sound, but they are outside the main window (frame 1) of your site.
bye
rainer kesel
kesel2

How to play wav files with Garageband/Midi keyboard

Hello,
I'm using Garagband (on my MAC, not iPad) and a midi keyboard for making songs. I just got a couple of cd's from Miroslav Philharmonik, but the sounds are all in standalone WAV files. There is no installation required. How can i use these sounds with Garageband? Must i copy/paste them in a specified directory on the HD? Or is a sample library necessary? I tried drag and drop, but that dind't work out...
Thanx in advance for your help.

this should help:
import com.ms.win32.*;
public void play()
          try
          URL url = new URL("file","C:\\","Hallo.wav");
          String wav= new String(url.getHost()+url.getFile());
          Winmm.PlaySound(wav,1,1);
          catch(MalformedURLException e)
or something like this ;))
Quaxi

How can i control graph with two inputs?

Hi,
i would like to ask you about the graph with two inputs
Normally, if i just give one input, they generate the graph with this input(y) vs time(x).
But now i would like to get the graph with my two inputs in x axis and y axis .
i want to control both of two axis. How could i do for it ?
i attached the file that i try to use "Build XY graph" to control both x and y axis with random number .
It can run but i don't know how come the graph show nothing. .
Actually , it have to show something like wavefrom continuously. am i right?
Could you tell me a way to solve it ?
>>>
what i want to get is ..
in Graph,
for x axis , ditance (always increases)
for y axis , vibration (vary)
>>>
Thank you so much for your time . I am looking forward your kindly reply.
With Respect,
Su
Attachments:
using Build XY graph.vi ‏59 KB

Hi NI9233,
Mind me to interrupt, I am just helping Mike to explain what he meant to you, refer to the graph:
Picture 1:
Double click on Build XY Graph, uncheck the clear data on each call
Picture 2 and 3:
Change your formula node into +1 Basic Function in Functions Pallette.
Hope that helps!
PS: I am sorry for the size of the image, seems I made a mistakes when I saved the picture.
Sincerely,
Krisna Wisnu
Message Edited by Krisna Wisnu on 11-19-2008 08:19 PM
Sincerely,
Krisna Wisnu
Attachments:
Clear Graph on Each Call.PNG ‏46 KB
+1.PNG ‏30 KB
+1_2.PNG ‏21 KB

How to play a cd with a .wave file?

I got a cd with a .wave file. I do not know how to play with itunes. can anyone help? I rarely use itunes.
answers are very appreciated
acb

hello chris,
itunes opens. this is it.
thanks for response
regards
angelika

Mail doesn't play any sound with new Gmail emails

I just signed for a Gmail account but I see it works in a someway different manner from the other email accounts I have. I noticed that Mail shows me a new incoming email almost immediately since I click send from another account, that's a good thing, but unfortunately it doesn't play any sound, like instead it does when I receive emails on the other accounts.
any suggestions?

I have noticed with 10.6.x Mail doesn't make sounds when receiving/sending Mail when you first launch it. However if I leave it open (just minimize it) and let it run and Mail goes get new email sound suddenly makes the sounds. I am still trying to figure out why it is happening (on both of my Macs). If you get any idea please share it because I would like to know also.

How to play flv-files with Flashplayer

Hello,
I encoded avi's getting flash 8 flv's; I used Adobe Première Pro CS3 and Adobe Flash Encoder as well.
I would like to play these flv's with Flashplayer 8; how should I proceed?
With the VLC-player 0-8-6c the flv's are displayed nicely.
Thank you very much,
Marc

Flash video is played in a browser with the Flash plug-in installed. The video needs to be authored in Flash where a player interface is created. The video is either embedded in a web page or linked to the page. The player interface is downloaded with the video from the host.

How to play .wmv file with a MSS1 stream encoded?

I found a bunch of old tutorials on my HD and tried to play them. QT gave me an error message about not having a codec. VLC also couldn't play them. I was able to open the files in QT and do a 'get info'. That's where I found the MSS1 info. Anyone have any ideas about this one?
Thanks,
Chris

Interesting, but any idea how to play them w/in QT?
Believe it would take a 5-8 year old player (WMV or third-party) to support the WMV 7 Screen format. My WMV experience doesn't go back that far so I am not even sure it was ever supported on the Mac. Believe Flip4Mac assumed support of WMV four years after the codec was initially released and it doesn't list MSS1 as being supported at this time. Would probably be easier to see if any old Windows users might have a compatible application and convert the files on the Windows machine.

How to output surround sound with airport express N

is this possible? I am streaming successfully with airport express, sounds great with no audio dropouts. I have it hardwired to my router and the AX is connected optical to my surround receiver. Music is only played through my fronts. Is there a way to output surround sound? I can't even choose different audio options through my A/V receiver.

I Found out the problem. When I was hooking everything up, I kept the t.v. on so I can assign audio inputs with the onscreen display. If the T.V. is left on....only stereo outputted. When I turned the t.v. off and with the airport express plugged into AUX, I was able to switch between surround sound settings.
so the moral of the story is, turn off video devices when you just want sound, especially if they are hooked up to the AVR with HDMI.

How do you record sound with Apple headphones Mac Pro?

(2008 Mac Pro) I'm trying to record a voice over on iMovie, and it won't record sound no matter what option I use for the sound input. I'm plugging my apple headphones into the headphone jack like I do on my MacBook (which works). I know that the Macbook has an in/out in one jack, but is it not the same for the Mac Pro? I've tried sticking the headphones in the back audio out where I can plug my stereo in and it wont even plug in. Also I know its not iMovie because Quicktime doesn't work with audio recording either.

The Mac Pro is not compatible with analog microphones. Its headphone jack is for output only. It does not work with headset microphones. Its audio in jack is line-level, so would need a pre-amp to work with most microphones.
The simplest solution is a USB headset or microphone.
<http://store.apple.com/us/browse/home/shop_mac/mac_accessories/music_creation>

How to detect beep sounds with AppleScript?

I have a small dilema.
I created a script that I know generates the standard mac error sound a.k.a. beep sound. I want to detect cases where it does not generate. IS there any way to verify with applescript if the beep sound plays at all?
I mean I hear it, but I want it logged as beep sound played/not played.
any ideas are welcome!

You need to generalize the problem to how do you detect an error in another application.
Typically, aplications will return an error code when they find an error. This will cause an excpetion in your applescript app. To detect the error you put the call in a try block.
So what program are you calling?
Did you wrie the other app? If so, return a non-zero error code.
Robert

How to play wikipedia sound files (Ogg) in Safari 6.0.3?

I'm pretty sure the answer to this one is that it can't be done, but just in case I've missed something in my web searching. I used to be able to play them under OSX 10.6.8. For instance, these sound files: http://en.wikipedia.org/wiki/Beethoven_symphony_5

Please link to a page you're having trouble with, if possible.

How to play analog sound with PC input

Similar Messages

Maybe you are looking for