How to play DVD-Audio with Mac mini?

I tried to search the forums but didn't find any answers...
Mini is my only machine on living room I'm using for music, videos etc.
Apple's DVD Player won't even open the disc, but says it's "invalid format".
VLC does open the disc, but only outputs 2ch stereo in dolby surround I think.
I have an DVD-A disc with DTS 6.1 ES mix.
Thank you for any help!

Got a partial solution by ripping the DVD with MactheRipper and then opening with Apple's DVD Player. This of course means that I have to burn a copy or keep the ripped version on my hard disk...

Similar Messages

  • How to play dvd-audio or dvd-a discs on iMac?

    How do I go about playing dvd-audio encoded discs on my iMac? I have been unsuccessful in finding a decoder that will recognize this format. I don't want to invest in ripper software unless I KNOW it will read and convert this format. Many thanks.

    I can play my DVD Audio discs on my MacBook Pro. On all my DVD Audio discs it shows DVD Audio and Dolby Digital. When I insert a DVD Audio disc the DVD player opens and plays the disc. Rou will only get Dolby Digital sound quality though and not DVD Audio sound quality.
    HTH

  • Playing DVD-Audios with an MSI K8N Neo4 Platinum

    I have a system built around an MSI K8N Neo4 Platinum motherboard.  I'm using the motherboard's onboard sound, and I have it connected to a 5.1 speaker system.  Using WinDVD 6 Platinum, I can play regular DVDs just fine, with awesome surround sound.  However, when I try to play DVD-Audios, I only get stereo sound.  Anyone have any suggestions?
    A.J.

    DVD video sound format AC3 5.1 and DVD-Audio sound format is not the same .
    DVD-Audio disks has also a video AC3 5.1 track and stereo track , set yor sw player to use AC3 and see if it helps.
    E.g a soundblaster Audigy ZE , or X-FI can render DVD-Audio , but not the onboard sound on Neo4.

  • Dual video and audio with mac mini

    Hi there,
    I am looking at purchasing a mac mini, but would like to know if it is possible to have 2 monitors attached, but each monitor would have a different sound.
    Example.
    Video playing on the HD TV and then listen to music via the audio out.
    Many thanks

    The dual monitors is not a problem, but the audio scenario you're suggesting will only work if the music is streamed via Airplay.  I believe since mini only has a single audio card, output via conventional outputs (SPDIF, HDMI, 1/8") may only work one at a time.  Airplay streams music as data, and not as a signal, so that's how you'd work around that.

  • Unable to record just audio with Mac Mini - no isight

    I am trying to use Podcast Capture on a mac mini connected to a generic monitor (no isight) and it is unable to initialize the audio subsystem. I am assuming this has to do with it needing a video camera, but surely that isn't required to record an audio only podcast. I have a microphone plugged into the line in and it works successfully in Garageband. Please help!

    Take a look at Soundflower, which will allow you to record audio from any source:
    http://soundflower.en.softonic.com/mac
    http://www.macworld.com/article/1159440/soundflower_capture.html

  • Problem Burning DVD-R with mac mini

    Since I have my Mac mini (1.5 years) I haven't been able to burn a DVD-R once! Now I am almost out of space (7GB left) and need to backup. I am using Toast 6. It burns CDs fine. And it starts burning DVDs, but after 5 minutes it says "buffer underrun". Now I tried different settings, different DVD-R discs, burning it slow, and closing all applications. Nothing helps. I also tried getting rid of Toast 6 and just putting the DVD in, but then the computer doesn't recognize.
    what else can I try? Wasting DVDs is becoming an expensive hobby
    please help.

    I also tried getting rid of Toast 6 and just putting the DVD in, but then the computer doesn't recognize.
    What, exactly, does happen when you put a blank DVD in your SuperDrive? What option do you have selected in the CDs & DVDs System Preference to happen when you do put a blank DVD in? Perhaps you should set it to "Open Finder" so you can try to burn a DVD with the Finder. It may be set to "Ignore" or even to open Toast - which, of course, it can't do if you've removed Toast.
    -Doug
    P.S. Exactly which version of Mac OS X are you using? Your profile here says "Mac OS X 10.2.x" but all the Mac minis shipped with at least Mac OS X 10.3.x. You can find out if you select "About This Mac" under the blue Apple menu.

  • How can I control my my mac mini with my macbook air (no wifi)?

    How can I control my my mac mini with my macbook air (no wifi)? Also...what is the best method (less lag) for screen sharing? 
    I own a mac mini Quad Server 2.0 i7 and I use it for audio production.  It's great but I need to travel with it. I was hoping some form of screen sharing could be useful using the macbook air to control the mac mini.  Therefore, I'd be using the stronger processor of the mac mini but would still be using the keyboard and trackpad from the air. 
    My two problems: 
    1.  I can't depend on wifi to make this happen. Wifi is not always available when travleing.  What would be the best way to configure a LAN connection?
    2.  The less lag the better for screen sharing.  Which apps are fastest?
    Thanks in advance.

    Both of your devices have WiFi built in. Here is Apple Support's solution:
    http://support.apple.com/kb/TA25616?viewlocale=en_US&locale=en_US

  • The best audio interface with Mac Mini using new & existing equipment?

    Hi,
    I got my existing set-up back in 2003. I'm now about to update it.
    I've talked to Apple Technical Support re which computer is best for me.
    Some important questions remain in terms of the audio interface or sound bridge I should use.
    I've detailed below my existing set-up, my existing configuration, my desired set-up (as recommended by Apple expert) and questions I have.
    Existing set-up:
    Hardware...
    1. ViewSonic HDMI 1080p Full HD LED monitor
    2. PowerMac G4 (PowerPC processor) computer
    3. PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
    4. MOTU 2408 mk3
    5. Quested monitors
    6. Focusrite Session Pack ff ISA220 compressor
    7. MOTU micro lite (midi-usb interface)
    8. Keyboard (yet to choose - I'll explain later)
    9. ADK Tube Condenser Commemorative Edition microphone
    10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
    Software...
    11. Tiger 10.4.11 operating system
    12. Logic Studio 8 music program
    Desired set-up:
    1. ViewSonic HDMI 1080p Full HD LED monitor
    2. Mac Mini full spec = £999.00
    3. _______________________________________
    4. _______________________________________
    5. Quested monitors
    6. _______________________________________
    7. _______________________________________
    8. _______________________________________
    9. ADK Tube Condenser Commemorative Edition microphone
    10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
    Software...
    11. Top-end operating system = Comes with Mac Mini
    12. Logic Pro X music program = £139.99
    Existing configuration:
    ViewSonic HDMI 1080p Full HD LED monitor goes into PowerMac G4 (PowerPC processor) computer
    PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
    MOTU 2408 mk3 used as my audio interface for sound in and sound out. This means that the sound comes out of computer via the MOTU 2408 and out of my Quested monitors (they are active so self-powered) which are attached to the MOTU's outputs.
    When I record vocals I sing into my ADK microphone (this microphone sources its own power from its own box which also feeds it Phantom Power) which is connected by a mic to jack cable to the Focusrite compressor which is connected by jack to jack cable to the MOTU 2408 which then goes into my computer via a firewire cable.
    When I play keyboards or use my keyboard as a midi controller it connects to my computer via the MOTU micro lite (midi-usb interface).
    I don't currently have a keyboard. I used to use my basic Yamaha PSR-540 keyboard as a midi controller but as it's not weighted and faulty I needed to get a new one. We got a new one via Thomann which was the M-Audio Pro Keys 88 keyboard but this quickly became faulty. We returned it and have since been considering other weighted keyboards. I am simply wanting a keyboard with Aftertouch, either 76 or 88 keys, weighted keys and very importantly, hammer action where the action is fast. I don't care for other controllers on the keyboard, on-board sounds, iPad compatibility or whatever.
    My Questions:
    Q1) Can you recommend any keyboards meeting my specifications?
    Q2) I can't imagine any of the Blue or other USB mics competing with my ADK and I'm quite happy with it. For vocals and when I've wanted to play the keyboard in as audio (not as a midi controller) I've used the Focusrite compressor to boost the sound. I'm not using many functions/presets on the compressor as I know it's best to record the sound of vocals mostly raw, is this correct, and if so is it worth me continuing to use this compressor or sell it?
    Q3) Do I need to have the MOTU micro lite (midi to usb) unit? Don't most keyboards these days connect direct usb to usb on the computer?
    Q4) I'm happy and used to the sound out from my Quested monitors. I'm happy and used to the sound in using my ADK microphone. What do I need for these to work best with the Mac Mini? Is my MOTU 2408 good for this, or is another MOTU product needed, or another product altogether?
    Q5) Depending on (Q4) do I need a soundcard installed in the Mac Mini as I read on a forum that these days the audio interface acts like the soundcard?
    Q6) I have such a bad connection to the internet it's like I have Dial-up!!! I use Airport Wireless which is connected to a router downstairs, which is 02 Broadband. Internet's not an issue downstairs on my girlfriend's intel PC which also uses a wireless connection but not Airport. Is this a problem because of my Airport, or do I need to get a router for upstairs, or should I connect it directy to the router downstairs by ethernet cable?
    Many thanks!

    Is there a reason you don't want to use your current Tascam?

  • How do I sync new i phone with mac mini????

    How do I sync new i phone with mac mini?

    Open up iTunes, then go ahead and plug in your phone to the USB port on the back of the Mini using the USB cable that came with the phone.

  • How do you play YouTube audio with the screen off with iPod 5th gen?

    I used to own a 2nd gen iPod touch, which ran on an ios 4.2.1 system, that allowed me to play YouTube with the screen off. Ever since I got iPod 5 which came with ios 7, let's say I am kinda still getting the hang of how everything works. I still would like to play YouTube while the screen is off, but seem to not know how. Does anyone know how to solve this problem? It's running on ios 8, so if you could help me with this, I would gladly appreciate it!

    Hi there, you can download itube, it's in the app store, and that allows you to save youtube videos for offline play. Also, you can play youtube audio with the screen off, even without a third party app. Click on a video. When it's playing, press the lock button. Press it again, to wake the device up. You should see your video on the front of the display, with a play button. Click it, and it will start playing even if the device is off. Hope I helped, ~Samuel.

  • How do I print from my mac mini with system 10.5.8

    How do I print from my mac mini with system 10.5.8? do tell...

    Rjanyk, welcome to the forum.
    What is the make/model of the printer that you are using?  I presume that it is an HP printer.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How can I use Pegasus R6 with Mac mini?

    I bought Pegasus R6 (Promise Technology, Inc). I connected to my Mac mini. But Pegasus R6 did not appear on desktop. In order to use Pegasus, MacBook Pro?iMac must have MacBook Pro EFI Firmware Update installed. But Mac mini does not have EFI Firmware Update. How can I use Pegasus R6 with Mac mini?

    Does your Mac Mini have thunderbolt?

  • Strange problem with mac mini hdmi, denon avr 3310 and itunes

    Hello,
    I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
    I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. I hear sound on all my 5.1 speakers.
    The big problem is with iTunes. When I want to watch rented series, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
    What is the problem? Did I make a wrong configuration or is something wrong with iTunes?
    Thanks in advance

    Great news! My Mac mini is sending true 5.1 to my reciever through the HDMI cable! Okay so here's my list of gear.
    MAC MINI 2011 2.5 i5 8gb ram
    Using a quality audioquest hdmi I have connected my Mac mini to my Denon 1712 Reciever. I have connected this hdmi cable into hdmi port entitled game 2. I have connect my reciever to my tv with a monster 1000 hdx thx certified hdmi cable. It has a transmission sped of 17 gb or so...meaning it can handle transmitting 3d...if only I had a 3d tv.
    Okay so that's the gear. Now onto the changes in audio midi. Open audio midi and Simply change it to 48000 hz and to 2 channel 16 bit integer. That's all I did and now it works. Before I had it set to 8 channel 24 bit and when I pulled up my surround sound options I could pretty much only get multi channel stereo. Now I can get several Dolby choices.
    The voices are coming out of the center speaker and all the action is coming out of the other speakers....so in other words 5.1 surround sound has been achieved on my Mac mini 2011 which has Lion on it.
    I have tested this with iTunes and Netflix. Both are in 5.1 and sound great. In iTunes I have tested both music and digital copies of movies. Both worked flawlessly.
    Rejoice Mac mini owners 5.1 surround is now possible over your Mac mini 2011 edition with just an hdmi cable to your reciever. You can throw away that toslink cable becuase now you don't need it!
    I hope this works for you. Remember not all hdmi cables and the same holds true for your reciever. If it does not work consider getting either audioquest or monster....everything else is junk.

  • Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

    Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

    I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
    Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
    and plays properly.
    Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
    Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
    I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
    Thanks again.
    JP

  • HT5517 how to play dvd on my computer on apple tv

    how to play dvd on my computer on apple tv

    Welcome to the Apple Community Jorge.
    Firstly you will need your Mac to support Mirroring...
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.
    AirPlay Mirroring from a Mac also requires a fairly robust network.
    Then you will need to use a 3rd party DVD player such as VLC since the Apple DVD Player software doesn't permit AirPlay Mirroring.

Maybe you are looking for

  • ITunes 10.2.1 sync using whole core

    Hi, I'm sure this has been asked but wasn't able to find any answers. Basically I'm syncing my iPod to iTunes 10.2.1 on my macbook (2.1 GHz Core 2 Duo, 2.5GB RAM running Snow Leopard 10.6.6). I've noticed lately that not only is it taking an absolute

  • Call a new one BAPI from NAKISA system

    Dear All, in our landscape we have installed a SAP ERP release 6.0 and a NAKISA TVSDN 2.0 with online connection (not staged). The main customer requirement was to appear in the same org.unit box the name of the chief position's holder. In order to c

  • Bank incoming payment

    hai, customer cheque deposit in bank a/c the entry is cheq deposit a/c Dr cheq clearing a/c Cr if the cheques is cleared by bank then 1.bank main a/c dr    chq clearing a/c cr 2.chq deposit a/c Dr    customer a/c Cr all are through SM35 pls correct m

  • The scan output is a file with lines

    The scan output is always a file with vertical lines. Whatever I try the printer, with wireless or USB connection, as well as  scanning with HP scan or the App scan from Windows 8.1. The result is the same, ie, fuzzy lines. Note: as a previous post s

  • Clickable links in email show up as gifs

    Why do clickable links in my email load as gifs most times? == This happened == Every time Firefox opened == i started using firefox