How to play few movie files on quicktime continuously

Is there a way to play few movies (under a folder) non-stop with QuickTime? Thank

You can use AppleScript or Automator to create a droplet (App) and then just drag a folder full of QuickTime file onto it to launch and play all of them.

Similar Messages

  • Can't play HD .mov files (in Quicktime, iMovie, or FCP)

    Hello,
    My Powerbook (bought in 2004) is senile and having various problems (see below for more details), so perhaps this issue can't be fixed without fixing the other stuff (or getting a new computer)... but just curious.
    I'm helping a friend with a video project, and he brought over his small Lacie external HD with his footage on it-- recorded with an HD video camera, then imported into iMovie HD, now simply a bunch of .mov files in a folder.
    When I try to open of the files with Quicktime Pro, it gives me a white screen and plays the sound, and tells me the "component is missing", and that i can try to find it on the Qcktime site, but I couldn't figure out which Codec to try (and you have to pay for them all?). I also tried updating my Quicktime to 7.4, and the exact same thing happens.
    When I try to open them with iMovie 4.0.1, it says "Can't open [this file]; skipping and continuing".
    When I try to open them with FCP 4.5 HD, it says "Codec Not Found, you may be using a compression type without the corresponding hardware card"
    Any ideas? Should I try erase-and-install with my whole system, after a backup onto my own external HD? I can't reinstall FCP because my disks are in America (I'm in Hong Kong), but even if it doesn't work with that, is there a way to make it work in iMovie?
    Thanks very much--
    Samantha
    PS- Background on my computer troubles of late-- in December I was having some problems with various things, which led me to try and repair the hard-disk, which didn't work. Some of my questions/conversation are on this thread.
    http://discussions.apple.com/thread.jspa?threadID=1256737&tstart=0
    Then for Christmas I bought DiskWarrior, ran it, but it couldn't repair the disk/replace the system because of some "error". Which makes me think I have some serious Hard-disk problem-- although the hardware seems fine according to SMART. So right now i'm just trying to get through a few of these big projects before trying erase-and-install with my whole system, and if that doesn't work, then probably investing in a new computer. Time to upgrade perhaps.
    Was having some weird problems before, so ended up getting DiskWarrior,

    Hi-
    Referring to this post:
    "The AIC codec is installed by iMovie HD and is just what its name implies. Intermediate (temporary conversion from one file format to another).
    Your G4 will not be able to play the file past a few frames per second because of the large dimensions and high data rate even if you did find the codec. You'll find editing it using QuickTime or iMovie a frustrating experience because of those facts."
    I'm a little confused-- do you mean that the G4 computer is just not strong enough to edit HD files "even if I did find the codec"? I was planning to edit it with Final Cut Pro (have never edited a HD project before), but is my computer not adequate? Let me know if there is any way for me to tackle an HD project with my current laptop-- otherwise I guess I really need to look into a new one.
    -shc

  • Scratchy sound when playing a .mov file in QuickTime

    I just got a new camcorder (Insignia NS-DV1080P) and took a video that is about 33 minutes long. I uploaded it to my mac, into iphoto, and when I try and play it in QuickTime, the picture is great, but it is very scratchy sounding. When I plug the camcorder directly into my tv, the sound is fine. When I play it back from the camcorder, the sound is fine. Please help with what I am doing wrong and how I can fix this.

    What I have always done is to add a Build In of Start Movie automatically after transition. Then add a Build Out of Stop Movie and adjust the delay to fit the timing of the movie. There are two problems with this technique.
    First, the delay can only go up to 60 seconds. So if you have a longer movie, you need to add a shape, set the fill and line to none and then add build ins and build outs (or actions) to equal the time needed to fit the length of the movie. For example, if you have a 3 minute movie, you can set the build out for 60 seconds, but then need to add 2 minutes worth of other actions to fill the time, so the build out happens at the end of the movie.
    The other problem is that if your movie is exactly 96 seconds and you have 96 seconds of builds, it might not still quite end right at the same time. There seems to be a bit of difference in the time from the movie and the builds. So you might have to play with the delays a little to get it to work just right.
    Hope that helps.

  • XP hangs when I try to play a .mov file

    Windows XP consistently hangs when I try to play a .mov file using QuickTime 7.4.1. There is no way to regain control of the system without powering off the computer. I've seen a number of postings indicating that people who have RAID disk systems are having similar problems, but I have an ordinary EIDE drive. Also, my .mov files are typically small (less than 40 MB). Device manager shows that all devices are working, and I've made sure that I have the latest graphics and sound drivers installed. Any suggestions will be appreciated.

    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    The Help-and-Tutorials page http://forums.adobe.com/thread/1275830 may help

  • Playing 1080p movie files

    Hi
    I have a 1080p mkv video file which i am trying to play on my iMac. it opens the file and i can hear the sound and then i get a error and it stops. i have ran 720p without a problem but wondering if 1080p was possible. i normally use vlc player. Any help would be much appreciated.

    If the 720 files play, and the 1080 doesn't, it may be your 1 GB of RAM that is the problem.
    Also, if you are opening the file from online, and letting it stream, are you waiting until enough of it is in place before starting to play it?
    I'm not sure what an "mkv" video file is, and I'm not familiar with "vlc" player; but my Intel iMac has 4 GB of RAM, and I'm able to play 1080 movie files using QuickTime player.

  • I can't open any 60p .mov files in quicktime.  Footage was shot on a JVC GY HM150 which is supposed to record in native fcp format.  Any ideas how I can open these files successfully?

    I can't open any 60p .mov files in quicktime or FCP5.  Sometimes in QT the audio plays but not the video. Footage was shot on a JVC GY HM150 which is supposed to record in native fcp format.  Any ideas how I can open these files successfully?

    Get ClipWrap2 and convert to an editable format for your version of FCP5.
    Probably DVCProHD will work
    x

  • Playing .mov files with QuickTime

    I tried playing a .mov file from a URL last night with my QuickTime 7.5 (861) software but got audio and a lovely green screen but no video. Can anyone tell me what I am doing wrong?
    Rae

    michiluni wrote:
    Not answered for Windows QT...
    did the Control Panel thing...
    still QT7.5 will not play a .MOV file that older QT's would play.
    What is the URL of the file you're trying to watch?

  • My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
    The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
    As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
    1) You can add component support so that QT can play the files natively or
    2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
    Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

  • Quicktime won't play my .mov files since I upgraded to Mavericks.

    Quicktime won't play my .mov files, even those from an iPhone, since I installed Mavericks.  "Tell Me More" doesn't tell me anything about a solution.  Any suggestions?

    What do I do?
    Frankly, if you have deleted the original movie clips from your camera/camcorder and iPhoto, then it sounds as if you are up the proverbial creek without a paddle and there is nothing further that you can do.
    Some facts:
    For some reason, the movieclips are awful small (13-30 KB).
    640 x 480
    Codecs: H.264, AAC
    While these facts are of little value without file duration information, as you yourself have already noted, the file sizes quoted are extremely small. A typical VGA H.264/AAC file of reasonable quality would normally have a combined total data rate in the 700 to 1,700 Kbps range depending on specific settings, profile, and level of the encoding software and could be even higher or lower depending on the quality levels required. Therefore, it is reasonable to assume that files in the 13 to 30 KB range only contain 104 to 240 Kbs and either have durations measured in fractions of seconds or do not actually contain enough data to be played. (E.g., the video data may be missing or the file is corrupted.) Thus, it is most likely that something was wrong with the workflow used to "export" your files to the external drive and when you ignored the fact that the files were not playing correctly, you closed the door on anything that you could do when you deleted the source files. (I.e., the normal workflow here is to copy the entire iPhoto library to the external drive, switch libraries, confirm the new library is working properly and only then delete the boot drive copy of the iPhoto library.)
    OBS: When I try to convert the files into something else (AVI, MP4 whatever) either it comes with an error, nothing happens or the converted file wont open. This happens with various convert-programs.
    If the data in the files is missing, then there is nothing to be converted by any application.

  • How can I convert .mov files for use with other apps?

    When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
    Thanks - J
    RS720G   Windows XP  

    Kodak Digital Camera QuickTime MOV Problems
    After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
    I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
    I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
    The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
    The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
    The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
    The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
    The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
    The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
    It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
    After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
    RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
    The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
    Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
    Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
    The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
    Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
    After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
    It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
    After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
    Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
    So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
    From here, however, there are still a few snags to untangle.
    The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
    I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
    Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
    That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
    Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
    The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
    So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

    We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
    Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
    Help!

    We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
    Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
    Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
    That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

  • Playing a .mov file on ipad

    Hello,
    I cannot open/play a .mov file from my dropbox on my ipad. Message <<file type is not currently supported>>. I made the movie with imovie and it works fine on my computer. I am also capable of using video in the photo center. How come I cannot open it from dropbox? Is there another way to send the video to my ipad and save it there.
    thanks!!!

    Hi loliza,
    If you are having issues opening a .mov file directly from Dropbox, you may be able to sync it to your iPad from iTunes. You can also verify that the file plays directly in iTunes, and/or see if it may be necessary to convert/create an iPad-specific version. You may find the following articles helpful:
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/ht1386
    iTunes: Frequently asked questions about viewing and syncing videos
    http://support.apple.com/kb/HT2729
    Apple Support: Verifying iTunes video conversion and video syncing using sample QuickTime files
    http://support.apple.com/kb/ht1211
    Regards,
    - Brenden

  • After loading k-lite can't view converted h.264(mov) files on quicktime

    Got an hd camcorder for christmas that records in the h.264(mov)format. Could only play files on quicktime 7 but processor to slow and video stuttered and lagged audio. Downloaded binks radtools to convert file to avi, which played farely decent in quicktime. Decided to try k-lite codec pack to see if i could improve on this. While instaling, k-lite told me "the preferred source filter that "h.264" is set to is invalid" and asked if it could remove it from the windows registry. thinking this could be problem i click yes. k-lite did not improve viewing with its instaled player and when i tried to play my converted file in quicktime i get only white screen but good audio. removed k-lite but still get same results with converted avi file in quicktime. (I think the preferred source removed was a nero application)
    Does anyone have any ideas on how to repair this? I want to purchase quicktime 7 Pro to convert files to avi but not if i am going to get the same playback results.

    If you can't find it in QuickTime Pro, ask the person that created the files.
    FWIW, you'd be better off just capturing the DV tapes in FCP directly.
    -DH

  • Converting mov files with Quicktime Player for iDevices

    I wasn't sure if should post this under iPad or here or at all as it is about coding, but it is about coding for Apple iDevices that can't display Flash, using Quicktime Player or QT Player 7 Pro:
    I'm trying to add the ability for Apple iDevices that can't display tutorials I created in Flash, to see them with H.264. I read that I can simply open the original tutorial that luckily is a .mov file with Quicktime Player 10 in Snow Leopard and File > Save For Web and QT will convert to H.264 and also output several files needed to upload to your server.
    But the only options are for iPhone, iPhone (cellular) and Computer. I assume an iPod would use the iPhone file, but iPad didn't exist yet.
    I chose iPhone and Computer for my test. I got 2 .m4v files a .jpg, a small .mov and a .html page with the code I needed to copy/paste to my target html page.
    Uploaded the files and could see the tutorial movie with my iPad fine. Using FireFox, I saw the beginning of the movie, then got the beachball. After a long wait, I tried a force quit and found that my Mac Pro was crashed too so had to hard shut down. Hate that.
    Rebooted the computer. Tried accessing with Safari this time and it worked fine.
    I also own Quicktime Player 7 Pro pre Snow Leopard (I'm running Snow Leopard now) and tried the conversion with it and noticed a few more config choices, like for frame rate. But the resulting code was about 29 lines of code with expected parameters versus 2 lines of code in the QT Player code which actually really surprised me. With both apps they have JavaScript references for the head tab to files on Apple's library on their site.
    So.. I'm wondering why FF and my computer crash, I did output for computer as well as iPhone. And what to do for FF users and the fact that there's no specific output for iPad, am I OK just using the iPhone output since I can see the file OK on my iPad test.
    Last, I've been reading about HTML5 versus Flash, but assume that what both my QT apps are outputting is HTML4. In the QT Player code there isn't even an embed tag, let alone the video tag I've read about, just a href to the exported Saved For Web .mov file, which I assume must point to the .m4v files that QT outputs and puts in the same folder as the other files, but there's no direct reference to them.
    Sorry for the length, or if this isn't the place for these questions, but I do want to get this right before I convert about 20 tutorials
    I wonder if I should wait until Lion and see if QT is changed to fix the FF crash and adds output for iPad?
    One last thing: when you access the converted file with an iPad, first you see a jpg of the first frame with "Click to Play" in the center. When you do, you get the movie with a play triangle which you have to press to actually start the movie. But when you access the same html file with Safari, all you have to do is click the "Click to Play" and the movie starts as expected. Bug?

    QuickTime X and QuickTime Player Pro create slightly different html code (but it all works about the same way). The "click to play" image file, a "reference" movie, multiple versions for different devices and the html code to preview the page and use as copy/paste into your Web page.
    QuickTime X has fewer options than QuickTime Player Pro. The iPhone preset works just fine on the iPad.
    Your Firefox crash may have been just coincidence and I doubt it was caused by the page code.
    You may want to wait a while longer for the HTML 5 code because browser support is still in the learning stage and millions of PC users still use out of date browsers.
    The reference movie points to the different versions of the file. The code "reads" the device and serves up the correct version for it.
    I don't own an iPad but I suspect it works like my iPod Touch. All of my QuickTime files have the play "triangle" so the click to play image style page requires two clicks on it.

Maybe you are looking for