How to play Google in background with screen off

TTrying to play radio shows off Google with screen off it was working yesterday now it has stopped ... Hoe to get it working again

Hi meenayogesh2008
Welcome to BlackBerry Support Community Forums
Sorry But I don't think that is possible on our BlackBerry Smartphone.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

How do I layer digital backgrounds with photoshop elements 2011? [was:Please Help]

How do I layer digital backgrounds with photoshop elements 2011?

What do you mean by "layer digital backgrounds"? Can you explain a little more about what you're trying to do?

HT4428 My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right.

My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right! Note : This problem persists after HDMI cable has been changed, and Apple TV was reset. My another iPad 4 64Gb also on the same most updated ISO has no problem.

I restarted the iPad, it is okay now! I think it is because I have been using the smart cover for too long, without shutting down the iPad completely! It just works fine with the airplay signal appearing again after restarting the iPad.

How can play 3D movies on a screen using MacBookPro and Apple TV?

If I Have a stored 3D movies on an external hard drive, how can play it using my MacBookPro?

I haven't heard of any 3D consumer level video cameras, so the content must be produced commercially, is copyrighted and most likely has been copy protected/cracked/P2Ped and now your asking us how to play it back on your Mac/AppleTV in violation of this sites rules of conduct with easily established id's and IP addresses where the stolen content can be found.
This is a open forum, the results of these posts are almost immediately indexed by Google's spiders, making it incredibly easy for the MIAA to find your post, which they then can send a supoena to Apple for your IP address, then to your ISP for your exact name and address, compare your IP to those they record P2P-ing online.
I can't say if Apple will cooperate with the MIAA or not, they do sell movie content thus the MIAA does have some leverage, Apple could ask the MIAA not to disclose their involvement in locating you, the MIAA could lie and say they saw you P2P-ing the content.
If your scared, that's good, it's a heck of a lot less expensive than a lawsuit over some stupid free movies.

How to play a cue point with mixer

I know how to play a cue point of sound with the method:
sound(1).queue([#member: ... #startTime: ... EndTime: ... ])
How can I transfer the method of cue point using the mixer?
I need to have any hint about this because I must use both cue
point with playrate, at my begginer level of knowledge I know that:
1) I can't use "playrate" with "sound(1).play()" method.
With this method I can use cue point;
2) I'm trying to know If I can use cue point with mixer method.
With this method I can use "playrate" .
It is also for me important to know if it is possible or
impossible to solve this problem in director.
Thanks.

iPhone 3gs, 4 or 4s?
With the former two, just drag the videos to the desktop iTunes and sycnhronize to your iPad. They will be synched to the stock Videos.
With the latter, you can either resize the video to 720p (or less) OR use a third-party app (It's Playing, AVPlayerHD, GoodPlayer being the best choices) to play it back. I'd go with the latter to avoid quality degradation and long-lasting reencodings.

How To Play Game On Multiple User Screens?

My son has a game called Age of Mythology that we recently installed on my iMac. He has been playing it for a few days on his own user screen. Today my other son wanted to play it on his user screen, but he got a message that said:
Cannot create log file. Must make sure that you have full file rights on the directory you installed Age of Mythology into, and that you have available disc space.
So I went back to my first son's screen name, because I knew it had been working for him. I clicked on the icon and then Get Info. At the bottom of the window that popped up there is an area that says Ownership & Permissions. I goofed around with these settings a little. I had to click on a padlock and enter my name and password as the administrator and when I got through changing some of the settings it asked if I really wanted to do this because it couldn't be undone. I clicked yes (which maybe I shouldn't have done), and now the game only plays for my first son on his user screen. It won't even play on mine and I'm the administrator!
Is there a way to get this game to play on everyone's screen names so there won't be arguments later about who is using who's screen?
One more thing: I installed the game while on my screen and I installed it in Applications.
Thanks for any help...
Sue
iMac Mac OS X (10.4.9) 20" 2.16 GHz Intel Core 2 Duo 1 GB 667 MHz DDR2 SDRAM

To do this you need to log on to the screen where you have permissions. Then navigate in Finder to the Age of Mythology app cmd+click, choose get info. scroll down to read write permissions and instead of your son's name choose system. Close the get info window and log in to another user (i.e. your other son's and open up the game to play and it should then play. This works on all types of files (text, video, audio..).
Happy Gaming,
David

Can not play videos in background with iso 6

I have updated my iphone 4s to iso 6 operating system. I am not happy this this new operating system. Anyway, i have a problem playing videos in background after the update.. I was able to play youtube music in background with iso 5.1 but not with iso 6..

Hei eidnolb (what ever u nickname means)
I can give u this answere on u quest:
Under Run Without Permission i can find Shockwave Flash Object:
Status: Deactiveted (in Norwegian language)
Version: 10.2.159.1
What will u recommand me to do now?
And i'm the one that should say thanks!

How to play a mp4 movie with DTS audio?

Hello,
I try to play a mp4 movie with DTS audio on the z1 player but i dont get any sound...I also have downloaded the app mx player, but this also wont play the dts audio. Any suggestions?
Thanks,
Edy

http://forum.xda-developers.com/showthread.php?t=1831111
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How to play media form InputStream with jmf or dsj?

the media format is avi or mp4.
media receive from socket and put in a ring buffer.now implement InputStream to read datas from buffer and play the data.
i want to know how to play media from inputStream

Hi, thanks for replying.
Im not exacly sure what year the imac is i cant seem to find it anywhere.
I bought the machine last year on apples refurbished site. Someone at Apple support suggested once that it maybe a 2010 model. In system profiler there is a thunderbolt tab in the left hand pane but it says there are no drivers loaded. Does that mean that thunderbolt is on the mac but i must install the drivers? If so, is it all plug and play after that or do i need to configure it all manually? If so coyuld you please point me in the right direction for instructions on how to do it. My tv for instance is saying that it cant find a server. As for vlc player, i use it all the time.Dont know what ide do without it !

How do I silence my reminder with the off button?

Hi,
I'd like to be able to silence my reminder (from my calendar) with the off button. At first I was able to do this. But recently something changed and now the ringer will continue until the entire reminder sound stops. Annoying with long reminders.
Thanks,
John Byrne

Not possible, you will need location service on for it to work.

How to access internal hard drive with screen not working

Veteran Mac user from Spain,
I am a graphic designer and i have a MacBook Pro 17 inch Intel Core 2 Duo 2.4 GHz (Santa Rosa) which i purchased in October of 2007 along with a 23 inch Apple Cinema HD Display Monitor which i have hooked up to my MacBook when i am working at home. About 2 months ago the right hand ventilator started making a very loud noise but because i had a lot work on i did not have time to send it away to be fixed. Then about a month ago the fan stopped working and i was very concerned that my MacBook was going to overheat but to my surprise the temperature never rose above 60 degrees, so i continued to work and every thing seemed to be okay. But a couple of weeks ago i was online and the computer suddenly froze up and when i restarted it all i got was a black screen on both the MacBook and the Cinema Display Monitor. The hard disk seems to boot correctly and the keyboard on the MacBook also is responsive (volume, brightness controls, caps/number lock, etc… are all responsive and the retroilumination on the keyboard also works). So on reading up on the forums i discovered that the graphics card NVIDIA 8600M GT is in fact faulty. I called apple and explained the problem and they told me that i will also have to replace the logic board.
On discovering the problem i realised that it would take a while to be fixed and i would need another Mac to continue working. So last week last week i purchased a Mac Mini and hooked it up to my Cinema Display and everything is working fine, BUT i desperately need to access my work folder on my MacBook's internal drive.
Can anybody tell me how to transfer the files from my MacBook (late 2007) to my Mac Mini without the screen working on my MacBook?
If it helps, my MacBook is running Leopard 10.5.8 and the Mac Mini is running Lion 10.7.2. The Mac Mini has an Intel i5 processor 2.3 GHz.
I would really appreciate the help, it is very urgent and i need to find a very quick solution, clients depend on it.

Thank you very much for your swift response.
I am going to try the second option that you propose because as i mentioned in my first post, i had my MacBook Pro hooked up to my Apple Cinema HD Display monitor and both screens were black.
Just one question…
Will the hard drive need an extrenal power source?
I am guessing that it will use the Mac Mini's power supply but i just want to make sure.
Thanks again! You have been most helpful.

How to play video repeatedly and with no audio

Hello all,
I use the following code to play video in Flex:
public function startPlayback(event:CairngormEvent) : void
     if (model.nsDemoRemotePlay != null )
                               * Stop and close previous NetStream.
                              var demoStopStreamEvent :VCDemoStopStreamEvent = new VCDemoStopStreamEvent();
                              CairngormEventDispatcher.getInstance().dispatchEvent(demoStopStreamEvent);
                    nc.connect(null);
                     * Setup NetStream for playback.
                    model.nsDemoRemotePlay = new NetStream(nc);
                    model. nsDemoRemotePlay.receiveAudio( false );
                    model.nsDemoRemotePlay.client = this._responder;
                         model.videoRemote = new Video(model.videoRemoteWidth, model.videoRemoteHeight);
                         model.videoRemote.attachNetStream( model.nsDemoRemotePlay );
     model.nsDemoRemotePlay.play("assets/videos/Demo.flv");
I have two questions:Could anybody please help me in answering these.
1. Is it possible to play a video without audio? I used receiveAudio( false ) with NetStream object. But audio is still there.
2. How can I play a video play repeatedly? I want to play video repeatedly and stop it only when a Stop event is fired.
Thanks.
roshni.

NSObj.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
public function netStatusHandler(event:NetStatusEvent):void
     switch(event.info.code)
          case "NetStream.Play.Start" :// your code
                                                     break;
          case "NetStream.Play.Stop" :// your code
                                                     break;
}//end of netstatus handler function
I hope my post will answer your question or helps

How to play http live streaming with VLC using FMS 4.0

Hello,
i'm using FMS 4 and i need to play my http live streaming event with VLC
I have had the following result with firefox using the url : http://myip:8134/live/events/livepkgr.old/events/_definst_/liveevent.f4m
<manifest>
<id>
                    livepkgr.old/events/_definst_/liveevent
          </id><mimeType>
          </mimeType><streamType>
                    live
          </streamType><duration>
                    0
          </duration><media streamId="livestream1" bitrate="100" url="../../../../streams/livepkgr.old/streams/_definst_/livestream1/livestream1" bootstrapInfoId="bootstrap7580"><metadata>
                              AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAFd2lkdGgAQHQAAAAAAAAABmhlaWdodABAbgAAA AAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAU0AAAAAAAAAIYXZjbGV2ZWwAQD8AAAAAAAAADnZ pZGVvZnJhbWVyYXRlAP/4AAAAAAAAAAl0cmFja2luZm8KAAAAAgMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlA ECPQAAAAAAAAAhsYW5ndWFnZQIAA2VuZwAACQMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlAECPQAAAAAAAAAh sYW5ndWFnZQIAA2VuZwAACQANc21wdGVUaW1lSW5mbwMAC3NtcHRlT2Zmc2V0AAAAAAAAAAAAAAAJAAdjdXN0ZGVmC gAAAAAAAAk=
                    </metadata></media><media streamId="livestream2" bitrate="200"><metadata>
                    </metadata></media><media streamId="livestream3" bitrate="350"><metadata>
                    </metadata></media><bootstrapInfo profile="named" url="../../../../streams/livepkgr.old/streams/_definst_/livestream/livestream.bootstrap" id="bootstrap3136">
          </bootstrapInfo><media streamId="livestream" url="../../../../streams/livepkgr.old/streams/_definst_/livestream/livestream" bootstrapInfoId="bootstrap3136"><metadata>
                              AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAFd2lkdGgAQHQAAAAAAAAABmhlaWdodABAbgAAA AAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAU0AAAAAAAAAIYXZjbGV2ZWwAQD8AAAAAAAAADnZ pZGVvZnJhbWVyYXRlAP/4AAAAAAAAAAl0cmFja2luZm8KAAAAAgMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlA ECPQAAAAAAAAAhsYW5ndWFnZQIAA2VuZwAACQMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlAECPQAAAAAAAAAh sYW5ndWFnZQIAA2VuZwAACQANc21wdGVUaW1lSW5mbwMAC3NtcHRlT2Zmc2V0AAAAAAAAAAAAAAAJAAdjdXN0ZGVmC gAAAAAAAAk=
                    </metadata></media><bootstrapInfo profile="named" url="../../../../streams/livepkgr.old/streams/_definst_/livestream1/livestream1.bootstrap " id="bootstrap7580">
          </bootstrapInfo>
</manifest>
How can i play that event with VLC?
Regards,

Problem solved - thanks to JayCharles. I forgot to set the live attribute. Here's the working code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:HBox>
         <mx:VideoDisplay
             live="true"
             autoBandWidthDetection="false"
             source="rtmp://localhost/live/livestream"/>
     </mx:HBox>
</mx:Application>

Trying to figure out how to change the desktop background with powershell/batch.

The entire thing I'm doing is pretty pointless lol. But I wanted to prank my mother. This is my computer by the way nothing malicious. I just had an idea that the next time she goes to click and open opera I would have a batch files disguised as it instead
that would just say some things. Mimic deleting files. Kill exlporer.exe. Change the background to one I created saying something like GOT YA! with a troll face or something. And then either run explorer.exe again or shutdown my laptop. I don't really know
what I am doing lol. I have the batch file done but the changing of the desktop has me puzzled. I can have the batch file to replace the current bmp file with one I've made but it doesn't actually change the background. And JFY WPA files just happened to be
where I decided to sit the files for this prank at until I'm done with them.
I used this to copy it over.
copy /y "C:\Users\user\Documents\WPA Files\Internet Explorer W
allpaper.bmp" "C:\Users\user\AppData\Roaming\Microsoft\Internet Explorer\Inter
net Explorer Wallpaper.bmp"
I used this to try to get the wallpaper to refresh to show the new one before I found out this doesn't work with windows 8.1
RUNDLL32.EXE user32.dll,UpdatePerUserSystemParameters
I found this but I am not entirely sure what to do with -name or -value or if I need to do anything to them or the others.. Doubt this would even refresh or what ever to make the new wallpaper actually show though.
set-itemproperty -path "HKCU:Control Panel\Desktop" -name wallpaper -value $image
Also found this which I don't get at all..
Add-Type @"
using System;
using System.Runtime.InteropServices;
using Microsoft.Win32;
namespace Wallpaper
public enum Style : int
Tile, Center, Stretch, NoChange
public class Setter {
public const int SetDesktopWallpaper = 20;
public const int UpdateIniFile = 0x01;
public const int SendWinIniChange = 0x02;
[DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)]
private static extern int SystemParametersInfo (int uAction, int uParam, string lpvParam, int fuWinIni);
public static void SetWallpaper ( string path, Wallpaper.Style style ) {
SystemParametersInfo( SetDesktopWallpaper, 0, path, UpdateIniFile | SendWinIniChange );
RegistryKey key = Registry.CurrentUser.OpenSubKey("Control Panel\\Desktop", true);
switch( style )
case Style.Stretch :
key.SetValue(@"WallpaperStyle", "2") ;
key.SetValue(@"TileWallpaper", "0") ;
break;
case Style.Center :
key.SetValue(@"WallpaperStyle", "1") ;
key.SetValue(@"TileWallpaper", "0") ;
break;
case Style.Tile :
key.SetValue(@"WallpaperStyle", "1") ;
key.SetValue(@"TileWallpaper", "1") ;
break;
case Style.NoChange :
break;
key.Close();
[Wallpaper.Setter]::SetWallpaper( 'C:\Users\user\Documents\WPA Files\Internet Explorer Wallpaper.bmp', 0 )
And this to run the powershell script once I have one lol
PowerShell -NoProfile -ExecutionPolicy Bypass -Command "& {Start-Process PowerShell -ArgumentList '-NoProfile -ExecutionPolicy Bypass -File ""C:\Users\user\Documents\WPA Files\desktopchange.ps1""' -Verb RunAs}"

Haha you're funny. I can't decide if you sincerely want me to learn or if you enjoy my struggle(I'm dumb) and think I'm up to no good. I do enjoy learning though :).
If I thought you were dumb I would have ignored you. I just think it would be more fun for you to find the answers. This is a technical forum and not a free answer forum. It is for people who are learning or who have specific technical
questions. I am dropping you in the "might be learning" bin. If you had asked a specific technical question I would have answered it.
¯\_(ツ)_/¯

How to play 5.1 audio with my Mac Book Pro Retina?

I recently received several DVD's that have 6 channel LPCM 24/192 and 24/96 sound. I have tried many alternatives but to no success. I will appreciate any suggestions... Sincerely, Joe Ray Skrha [email protected]

How are you ripping the video and audio from the DVD? You can't import stuff from a video DVD into an NLE without converting it to a workable format. If you use something that will give you ProRes files, and the audio is surround sound, FCPX will edit surround sound natively. As for playing it back in surround sound, you'd need a USB interface that connects to a surround sound system.

How to play Google in background with screen off

Similar Messages

Maybe you are looking for